GVision K12TS-C Manual de usuario
Operation Guide
12” TFT LCD Monitor
On Screen Display Control
Video-in/Touch Screen Function
800 x 600 Max. Resolution
Or
1024 x 768 Max. Resolution
Key Control / Indicator
1
2
3
4
5
6
1
2
3
4
5
6
Connector
R0062129
Package Contents
Included with your LCD monitor are following items:
12” TFT liquid crystal monitor
D-sub 15 pin signal cable
DVI 24 pin signal cable ( option)
Power adapter 12V/3A
AC power cable
DC 24V-in cable ( option )
Operation guide
RS232/USB cable for touch screen function ( option )
Product Features
High contrast color TFT LCD display support resolution up to XGA
1024x768. Compatible with IBM VGA, VESA, and Macintosh
standards.
Power management system conforms to VESA DPMS standard.
DC 12V-in Or DC 24V-in power system.
Support DDC1/2B for Plug & Play compatibility.
Advanced OSD control for picture quality adjustment.
Video-in function ( S and RCA ) interface
Touch screen function.
Water proof (front frame ) is IP54
Key Control / Indicator
1. Power LED This LED indicates different status when this unit
operates in different modes.
2. Power Switch Pressing this button turns the display system power on
or off.
3. Menu/Select ▲Pressing this button pops up the OSD menus on the
screen, and used to select (“Up” direction) the OSD control options on
the screen.
4. Menu/Select ▼Pressing this button pops up the OSD menus on the
screen, and used to select (“Down” direction) the OSD control options
on the screen.
5. +This button is used to adjust the increasing value of the selected
OSD control option.
6. −This button is used to adjust the decreasing value of the selected
OSD control option.
Connector
1. Touch This is for connecting the touch panel RS232 /USB connector.
2. Power Connector This is for connecting the power cable.
3. Signal Connector This can be connected with the D-sub 15 pin
signal connector.
4. Signal Connector This can be connected with the DVI 24 pin signal
connector.
5. Video in(S) This can be connected with the video-in S connector.
6. Video in(RCA) This can be connected with the video-in RCA
connector.
Adjusting with the OSD Control
To Display and Select the OSD Functions:
1. Pressing ▲, ▼, +,or -once pops up the OSD function main menu.
2. Pressing ▲or ▼a second time to select the different OSD control.
3. Pressing
+or -button changes the value of the selected OSD control
option.
OSD Control Function
CONTRAST
BRIGHTNESS
AUTOTUNE
H-POSITION
V-POSITION
LANGUAGE
FREQUENCY
PHASE
RED/GREEN/BLUE
COLOR TEMP.
INPUT SELECT
RECALL
Display Modes
Item Resolution Type H. Scan V. Scan Pol. Pixel
(KHz) (Hz) (MHz)
1 640X350 VGA 31.469 70.087 + / - 25.175
2 720X400 VGA 31.469 70.087 - / + 28.322
3 640X480 VGA 31.469 59.940 - / - 25.175
4 640X480 VESA72 37.861 72.809 - / - 31.500
5 640X480 VESA75 37.500 75.000 - / - 31.500
6 640x480 MAC 35.000 66.667 - / - 30.240
7 800X600 SVGA 35.156 56.250 + / + 36.000
8 800X600 SVGA 37.879 60.317 + / + 40.000
9 800X600 VESA72 48.077 72.188 + / + 50.000
10 800X600 VESA75 46.875 75.000 + / + 49.500
11 832X624 MAC 49.722 74.546 - / - 57.280
12 1024X768 VESA60 48.363 60.004 - / - 65.000
13 1024X768 VESA70 56.476 70.069 - / - 75.000
14 1024X768 VESA75 60.023 75.029 + / + 78.750
Specifications
Model ,W2TS/S2TS W2TX / S2TX
LCD Display 12.1” TFT Active Matrix Panel
Display Size 245.8(H) x 184.3(V) mm 245.8(H) x 184.3(V) mm
Pixel Pitch 0.3075(H) x 0.3075(V) mm 0.240(H) x 0.240(V) mm
Max. Resolution SVGA 800 x 600 XGA 1024 x 768
Contrast Ratio 250 : 1 250 : 1
Brightness 180 Cd/m2350 Cd/m2
Response Time 30 ms 30 ms
Display Color 262K 262K
Viewing Angle +45o~ -45o(L/R), +15o~
-30o(U/D) (min.)
+55o~ -50o(L/R), +35o~
-45o(U/D) (min.)
Input Signal Video R.G.B. Analog 0.7V peak-peak
Sync TTL Positive or Negative
Signal Connector Analog 15 Pin D-Sub
digital 24 Pin DVI ( option )
Video-in ( option ) RCA/S connector
Touch Panel (option ) Resistive / Capacitive Type with RS232 or USB connector
Power Adapter Input :AC 100 ~ 240 V ; Output: DC 12 V, 3A
DC-DC Input: DC 18V~36 V ; Output: DC 12 V, 3A
Federal Communication Commission Radio Frequency
International Statement
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
Este manual sirve para los siguientes modelos
6
Tabla de contenidos
Otros manuales de Monitor de GVision
GVision
GVision K12TS-C Manual de usuario
GVision
GVision P12EX Manual de usuario
GVision
GVision F17AH-D Manual de usuario
GVision
GVision K08AS-F Manual de usuario
GVision
GVision MA15BX Manual de usuario
GVision
GVision K08AS-CA Manual de usuario
GVision
GVision K17TH-C Manual de usuario
GVision
GVision K15TX-C Manual de usuario
GVision
GVision F15AX-D Manual de usuario
GVision
GVision K17BH-F Manual de usuario
GVision
GVision P15PX-L Manual de usuario
GVision
GVision F15AX-D Manual de usuario
GVision
GVision P15BX-A Manual de usuario
GVision
GVision K15PX-F Manual de usuario
GVision
GVision L15AX Series Manual de usuario
GVision
GVision P10PS-J Manual de usuario
GVision
GVision P17PH-L Manual de usuario
GVision
GVision K12TX-C Manual de usuario
GVision
GVision MA17BH-A Manual de usuario
GVision
GVision P15PX-L Manual de usuario
