GVI Security GV-VP410Y Manual de usuario
VIDEO INTERCOM SYSTEM
INSTALLATION AND OPERATION MANUAL
■ First read the user’s manual carefully
before using this product and call to the
nearest dealer or installation service
center for detailed guidance when a
problem occurs on using or the content
isn’t understood
GV-VP410Y
FCC COMPLANCE STATEMENT
INFORNATION TO THE USER: This e
q
ui
p
ment has been tested and found to com
p
l
y
with
the limits for a class B di
g
ital device. Pursuant to
p
art 15 of the FCC rules. These limits are
desi
g
ned to
p
rovide reasonable
p
rotection a
g
ainst harmful interference in a residential
installation. This e
q
ui
p
ment
g
enerates, use and can radiate radio fre
q
uenc
y
ener
gy
and, if
not installed and used in accordance with the instruction, ma
y
cause harmful interference
to radio communications. How ever. There is no
g
uarantee that interference will net occur
in a particular installation, If this equipment does cause harmful interference to radio or
television rece
p
tion, which can be determined b
y
turnin
g
the e
q
ui
p
ment off and on, the
user is encoura
g
ed to tr
y
to correct the interference b
y
one or more of the followin
g
measures:
＊ Reorient or relocate the receiving antenna
＊ Increase the separation between the equipment and receiver
＊ Connect the e
q
ui
p
ment into an outlet on a circuit different from that to which the
receiver is connected
＊ Consult the dealer or an experienced radio/TV technician for help
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
CET APPAREIL NUMERIQUE DE LA CLASSE B EST CONFORME A LA NORME NMB-003 DU
CANADA
CAUTION: Chan
g
es or modification net ex
p
ressl
y
a
pp
roved b
y
the manufactured could void
the user’s authority to operate the equipment.
◆ Features
1. Introduction
2. Components
3. Specifications
◆ Parts
◆ Installation
1. Cable connection
2. GV-VP410M indoor unit installation
3. GV-VP410C outdoor unit installation
◆ Name and Function of Each Part
◆ Cautions
◆ No Trouble
◆ Operation Description
1. When a visitor arrives at the door
2. To see the outdoor
3. To check the visitor’s appearance
4. Open the door
◆ Warranty
◆ Warranty Card
◆ Memo
Contents
4
4
4
5
6
7
13
10
8
7
14
14
15
15
18
17
17
16
16
15
1. Simple installation
Because the currently used door phone 4-wire system and box can be utilized, a separate
work is unnecessary and the construction is simple.
2. Solid active semiconductor
Because the solid active semiconductor is used, no preheat is required, no function of this
product is affected by temperature or humidity, its life span is semi-permanent and it’s
strong against an external shock
3. Infrared LED built-in
No separate illumination is needed at dark place or night as well as bright place owing to the
built-in infrared LED
4. 1/3 inch solid active element
Using 1/3 inch solid active element allows you to see a cleaner screen than before.
5. Elegant design
This product gives more abundance to the consumer’s life as beautiful design corresponding
to the modern sense
6. Video Memory Unit (Option)
Records the visual image of up to 32 visitors without any film or tape when you are put. And
you can check the memorized images by pressing play button
1. Introduction
This Video Intercom System is an easy-to-use video intercom system offering many benefits
and conveniences, such as relieving the anxiety of not knowing who is at the door, to the
security-conscious business or homeowner
2. Components
1) GV-VP410M: Indoor monitor unit
2) GV-VP410C: Outdoor camera unit
Features
3. Specifications
Outdoor Unit (GV-VP410C) Specifications
CCD Black and White 1/3” CCD
SYNC System Internal
Scanning Frequency 15.75KHz (H) 60Hz (V)
Frame 30/sec
Lens F=2FixedFocus, 92.5 degrees of viewing angle
Output Signal Composite Video 75Ω 1Vp-p
External/input jack Terminal Chime Bell
Illumination 0Lux. (Auto Lighting)
Power Consumption DC 12V, 3W
Telephone Call System 4-Wire
Scanning System 525 Line
Auto Iris Internal ALC system
Microphone Built-in condenser type
Audio Amp Built-in RX and TX
CCD Pixels 270,000
Dimensions (mm) 96(W) X 128(H) X 46(D)
Weight 177(g)
Indoor Unit (GV-VP410M) Specifications
Monitor 4” Black and White type
Scanning Frequency 15.75KHz(H) 69HZ(V)
Power Consumption DC 15V, 13W
Resolution 380 TV lines
Input Signal Composite Video 75Ω 1Vp-p
External/input jack Terminal Chime Bell
Dimensions (mm) 190(W) X 230(H) X 52(D)
Weight (g) 1.229(g)
Features
Monitor Parts
Camera Parts
Parts
① Wall hanger
② Wall han
g
er
fixing screw
② Screw fixin
g
the camera
control su
pp
ort and
main camera support
④ Screw fixin
g
the camera
into main
⑤ Camera
holder
bracket
③ Water proof cap
① Main camera support
1. Cable Connection
1-1. Cable connection Precautions
＊ Monitor and door camera wiring, 4-wire type, are polarized, as seen in preceding diagram,
Thus, special attention to polarity should be given, because wiring of other
specifications will not operate system.
＊ Available Video door phone wiring with 0.65Φ is less than 50m in length
Coaxial cable (5C-2V) is used for any length for any exceeding system
＊ Connecting wiring between monitor and door camera must not be installed near other
electrical cable, nor be horizontal. (In such case, clear picture can be expected, due to
interruption by electrical noise)
Installation
※ Video Memory Unit: GVM-VP410 (option)
CAMERA
(GV-VP410C)
DOOR STRIKE
(DC12V/300Ma)
MASTER MONITOR (GV-VP410M)
ADAPTOR
(DC15V/1A)
ADAPTOR
(DC15V/1A)
(GV-VP410M) SLAVE MONITOR
(GVM-VP410)
VMU
2. GV-VP410M Indoor Unit Installation
2-1. External View
2-2. Installation
Installation
1. When system is attached to 1 rectangular switch box
② 1 rectangular
switch box
① Wall hanger
p
anel for
fixing monitor
When system is attached to wall or pillar Standard height monitor
Center of
Braun tube
(Unit: mm)
2-3. Installation Precautions
＊ Keep away from humidity, magnetic force, medicines, direct sunlight, heater, and so
on, which may result in a trouble.
＊ The standard height of monitor is within 1,450mm and 1,500mm from the floor on the
basis of the Flat CRT
2-4. Additional Monitor and Video Memory Unit Installation (Option)
＊ When 1 camera and 1 monitor are used, switch the Multi monitor selecting switch,
located on the back of monitor, to “1”.
＊ When 1 camera and more than 2 monitors are connected, switch the Multi monitor
selecting switch, located on the back of the monitor unit, to “1” on the last monitor and
switch it to “4” on the last monitor.
＊ Video memory unit should be connected to the last monitor.
Installation
CAMERA
(GV-VP410C)
MASTER MONITOR (GV-VP410M)
(GVM-VP410)
VMU (GV-VP410M)SLAVE MONITOR
3. GV-VP410C Outdoor Unit Installation
3-1. External View
3-2. Installation
① Wall bracket for fixing
camera.
When system is attached
To wall or pillar
When system is attached to 1 rectangular switch box
② 1 rectangular switch box
Installation
Tabla de contenidos
