GSi QuickBolt Manual de usuario
2-Leg and 4-Leg QuickBolt™
Towers
Installation Manual
PNEG-2115
Version 1.0
Date: 01-04-17
PNEG-2115
All information, illustrations, photos, and specifications in this manual are based on the latest
information available at the time of publication. The right is reserved to make changes at any
time without notice.
2PNEG-2115 2-Leg and 4-Leg Towers
Contents
Chapter 1 Safety Precautions ....................................................................................................................5
Safety Guidelines........................................................................................................................5
Cautionary Symbol Definitions......................................................................................................6
Safety Precautions ......................................................................................................................7
Safety Sign-off Sheet.................................................................................................................12
Chapter 2 General Information ................................................................................................................13
Overview ..................................................................................................................................14
Required Specifications .............................................................................................................14
Hole Preparation .......................................................................................................................14
Elevator Guy Bracket.................................................................................................................15
Anchor Washers........................................................................................................................16
Bin Guy Kit for 2-Leg Towers ......................................................................................................17
Seal Plate Kit ............................................................................................................................17
Top Tower Beams......................................................................................................................18
Catwalk Location.......................................................................................................................18
Tower Erection ..........................................................................................................................19
Chapter 3 Hardware Requirements..........................................................................................................21
Chapter 4 2-Leg Towers...........................................................................................................................25
2-Leg Tower Layout...................................................................................................................25
Assembling the 2-Leg Tower Section (Chevron Bracing) ..............................................................26
Assembling the 2-Leg Tower Section (Warren Bracing) ................................................................28
Stacking the 2-Leg Tower Section...............................................................................................31
Chapter 5 4-Leg Towers...........................................................................................................................33
4-Leg Tower Layout...................................................................................................................33
Assembling the 4-Leg Tower Section (Chevron Bracing) ..............................................................34
Assembling the 4-Leg Tower Section (Warren Bracing) ................................................................38
Assembling the 4-Leg Tower Section (Chevron and Warren Bracing) ............................................44
Stacking the 4-Leg Tower Section...............................................................................................49
GSI Group, LLC Limited Warranty ...........................................................................................51
PNEG-2115 2-Leg and 4-Leg Towers 3
NOTES
4PNEG-2115 2-Leg and 4-Leg Towers
1Safety Precautions
Topics Covered in this Chapter
▪ Safety Guidelines
▪ Cautionary Symbol Definitions
▪ Safety Precautions
▪ Safety Sign-off Sheet
Safety Guidelines
Safety guidelines are general-to-specific safety rules that must be followed at all times. This manual is
written to help you understand safe operating procedures and problems that can be encountered by the
operator and other personnel when using this equipment. Save these safety guidelines for future
reference.
As owner or operator, you are responsible for understanding the requirements, hazards, and precautions
that exist and to inform others as required. Unqualified persons must stay out of the work area at all
times.
Alterations must not be made to the equipment. Alterations can produce dangerous situations resulting in
SERIOUS INJURY or DEATH.
This equipment must be installed in accordance with the current installation codes and applicable regula-
tions, which must be carefully followed in all cases. Authorities having jurisdiction must be consulted
before installations are made.
When necessary, you must consider the installation location relative to electrical, fuel and water utilities.
Personnel operating or working around equipment must read this manual. This manual must be delivered
with equipment to its owner. Failure to read this manual and its safety instructions is a misuse of the
equipment.
ST-0001–3
PNEG-2115 2-Leg and 4-Leg Towers 5
Chapter 1: Safety Precautions
Cautionary Symbol Definitions
Cautionary symbols appear in this manual and on product decals. The symbols alert the user of potential
safety hazards, prohibited activities and mandatory actions. To help you recognize this information, we
use the symbols that are defined below.
Table 1-1 Description of the different cautionary symbols
Symbol Description
This symbol indicates an imminently hazardous situation which, if
not avoided, will result in serious injury or death.
This symbol indicates a potentially hazardous situation which, if not
avoided, can result in serious injury or death.
This symbol indicates a potentially hazardous situation which, if not
avoided, can result in minor or moderate injury.
This symbol is used to address practices not related to personal
injury.
This symbol indicates a general hazard.
This symbol indicates a prohibited activity.
This symbol indicates a mandatory action.
ST-0005–2
6PNEG-2115 2-Leg and 4-Leg Towers
Chapter 1: Safety Precautions
Safety Precautions
This is all the topics contained in the Master Safety Reference File. Mainly used to verify formatting
before releasing the topic.
Use Personal Protective Equipment
• Use appropriate personal protective equipment:
Eye
Protection
Respiratory
Protection
Foot
Protection
Hearing
Protection
Head
Protection
Fall
Protection
Hand
Protection
• Wear clothing appropriate to the job.
• Remove all jewelry.
• Tie long hair up and back.
ST-0004–1
Follow Safety Instructions
• Carefully read all safety messages in this manual and safety
signs on your machine. Keep signs in good condition.
Replace missing or damaged safety signs. Be sure new
equipment components and repair parts include the current
safety signs. Replacement safety signs are available from
the manufacturer.
• Learn how to operate the machine and how to use controls
properly. Do not let anyone operate without instruction.
• If you do not understand any part of this manual or need
assistance, contact your dealer.
ST-0002–1
PNEG-2115 2-Leg and 4-Leg Towers 7
Chapter 1: Safety Precautions
Sharp Edge Hazard
• This product has sharp edges, which can cause serious
injury.
• To avoid injury, handle sharp edges with caution and always
use proper protective clothing and equipment.
ST-0036–2
Toxic Fume and Dust Hazard
• Remove paint before welding or heating.
• Avoid potentially toxic fumes and dust. Hazardous fumes
can be generated when paint is heated by welding, solder-
ing, or using a torch.
• Do all work outside or in a well-ventilated area. Dispose of
paint and solvent properly.
• Remove paint before welding or heating:
— If you sand or grind paint, avoid breathing the dust.
Wear an approved respirator.
— If you use solvent or paint-stripper, remove stripper with
soap and water before welding.
— Remove solvent or stripper containers and other flam-
mable material from area. Allow fumes to disperse at
least 15 minutes before welding or heating
ST-0043–1
Stay Clear of Hoisted Equipment
• Always use proper lifting or hoisting equipment when assem-
bling or disassembling equipment
• Do not walk or stand under hoisted equipment.
• Always use sturdy and stable supports when needed for
installation. Not following these safety precautions creates
the risk of falling equipment, which can crush personnel and
cause serious injury or death.
ST-0047–1
8PNEG-2115 2-Leg and 4-Leg Towers
Chapter 1: Safety Precautions
Avoid Falls During Service and Installation
• Use proper fall protection equipment.
• Anchor the bottom of any ladder being used in a bin or silo to
prevent it from slipping.
• Use rubber pads or other anti-slip devices to prevent the
ladder from slipping on the bin floor.
• Exercise caution when using a ladder to perform work in a
partially filled grain bin. The ladder can sink into the grain
and cause a fall.
• Because the equipment is suspended from chains in the
center, be cautious of positioning the ladder against the
equipment. The equipment can move or swing from the
weight of a person climbing on the ladder.
• When setting a ladder against the equipment, a vise grip or
other type of tie down must be used in the front and back of
the track drive unit. This keeps the equipment from rolling or
sliding around the bin while service work is being performed.
• During heavy service work, such as removing the auger
drive, electric motors, or replacing electrical swivel, tying the
ladder to the main frame or other solid component is
advised.
• Never climb out on the main beam or augers from the ladder
or roof manhole. The equipment can swing, causing a fall.
• Do not climb Stir-Ator down augers to make adjustments or
repairs. Slipping can cause falling, bodily injury, or both.
• If an unusual amount of service work needs to be performed,
consider lowering the unit onto sawhorses.
ST-0010–2
PNEG-2115 2-Leg and 4-Leg Towers 9
Chapter 1: Safety Precautions
Fall Hazard
• Ladders, stairways and platforms are for use by competent
and trained personnel only. Do not allow children or other
unauthorized persons to have access to the equipment.
• Access to the equipment must be restricted by the use of
security fencing and lockable gates.
• Lower sections of ladders must be fitted with a lockable
safety gate to prevent unauthorized access.
• Make sure that hot surfaces have had adequate time to cool
before working on or in the equipment.
• Lock out and tag out power supplies and fuel supplies to all
equipment.
• Do not attach lifting equipment to ladders or platforms.
• Do not go outside of the safety rails provided on elevated
platforms.
• Do not work at heights during high winds, rain, snow, or ice
storms.
ST-0056–1
Fall Hazard
• Keep access door closed while on a platform to avoid falls.
• Always use proper personal protective equipment and
proper clothing when using equipment. Failure to follow
safety precautions can result in severe injury or death.
ST-0042–2
10 PNEG-2115 2-Leg and 4-Leg Towers
Tabla de contenidos
