GRM S5000 Manual de usuario
V2.2 4/3/2020
S5000
User Guide
S5000 User Guide
2
TABLE OF CONTENTS
1 CUSTOMER SERVICE CONTACT...........................................................4
1.1 Technical Support ......................................................................... 4
1.2 GRM Workshop ............................................................................. 4
2 OVERVIEW.........................................................................................5
2.1 General Dimensions ...................................................................... 5
2.2 Baseline Set-Up ............................................................................ 6
2.3 Chassis Identification .................................................................... 7
3 CAR CHARACTERISTICS.....................................................................8
3.1 A - ENGINE .................................................................................. 8
3.1.1 General Information................................................................. 8
3.1.2 Engine Power Curve ................................................................. 8
3.1.3 Engine Identification ................................................................ 9
3.2 B - ENGINE SYSTEMS .................................................................. 10
3.2.1 Cooling System ..................................................................... 10
3.2.2 Oil System ........................................................................... 10
3.2.3 Intake System ...................................................................... 11
3.2.4 Exhaust System .................................................................... 11
3.2.5 Fuel System ......................................................................... 11
3.3 C - TRANSMISSION ..................................................................... 12
3.3.1 Clutch ................................................................................. 12
3.3.2 Transmission ........................................................................ 12
3.3.3 Lubrication ........................................................................... 13
3.3.4 Pneumatic Gear selection system ............................................. 14
3.3.5 Differential ........................................................................... 14
3.3.6 Driveshaft ............................................................................ 14
3.4 D - WARM UP PROCEDURE ........................................................... 15
3.5 F - FRONT AND REAR SUSPENSION ............................................... 16
3.5.1 Overview ............................................................................. 16
3.5.2 Set-Up Adjustments ............................................................... 17
3.5.3 Front Suspension Geometry adjustment .................................... 17
3.5.4 Front Anti-Roll bar ................................................................. 18
3.5.5 Front Spring ......................................................................... 19
3.5.6 Rear Suspension Geometry adjustment ..................................... 20
3.5.7 Rear Anti-Roll bar .................................................................. 20
3.5.8 Rear Spring .......................................................................... 22
S5000 User Guide
3
3.5.9 Front and rear Dampers ......................................................... 24
3.6 G - STEERING ............................................................................ 25
3.7 H - BRAKING.............................................................................. 25
3.7.1 Brake Systems ...................................................................... 25
3.7.2 Brake Actuation .................................................................... 26
3.8 I - WHEELS AND TYRES ............................................................... 27
3.8.1 Wheels ................................................................................ 27
3.8.2 Wheel Nuts .......................................................................... 27
3.8.3 Tyres ................................................................................... 27
3.9 J - AERODYNAMIC ....................................................................... 29
3.9.1 Front Wing ........................................................................... 29
3.9.2 Rear Wing ............................................................................ 29
4 ELECTRICAL SYSTEM........................................................................31
4.1 Overview ................................................................................... 31
4.2 Power Circuit ............................................................................. 31
4.3 Fire Extinguisher ......................................................................... 32
4.4 Radio Connections ...................................................................... 33
4.4.1 Radio to Car Connection ......................................................... 33
4.4.2 Helmet to Car Connection ....................................................... 33
5 ELECTRONICS ..................................................................................34
5.1 User Interface ............................................................................ 34
5.1.1 Steering Wheel ..................................................................... 34
5.1.2 Control Panel ........................................................................ 35
5.1.3 Dashboard ........................................................................... 36
5.1.4 Dash Alarms ......................................................................... 38
6 DATA LOGGER..................................................................................39
6.1 Channel List ............................................................................... 39
7 FLUIDS ............................................................................................40
8 CAR MAINTENANCE..........................................................................41
9 THIGHTENINGS................................................................................41
S5000 User Guide
4
1CUSTOMER SERVICE CONTACT
1.1 TECHNICAL SUPPORT
Name Email Phone
Stefan Millard s5000@grmotorsport.com.au +61 400 282 934
1.2 GRM WORKSHOP
Website grmotorsport.com.au
E-Mail mail@grmotorsport.com.au
Phone +61 3 9793 6933
Address
Factory 2
13 Kitchen Road
Dandenong South VIC 3175
S5000 User Guide
5
2OVERVIEW
2.1 GENERAL DIMENSIONS
Specific Dimensions (Refer to Homologation Document)
Wheelbase 3090mm
Front Track 2020mm MAX
Rear Track 2020mm MAX
Power 560hp Maximum
Total Weight (Kerb no fuel) 850kg
Fuel Tank Capacity 62L
THE S5000 IS AN EXTREMELY HIGH-PERFORMANCE VEHICLE FIT FOR USE ONLY AT CONFEDERATION OF
AUSTRALIAN MOTORSPORT LICENSED FACILITIES.
IT IS THE RESPONSIBILITY OF THE OPERATOR (THIS MAY OR MAY NOT BE THE DRIVER) TO ENSURE THE
VEHICLE IS FIT FOR PURPOSE AND SAFE TO OPERATE.
ROGERS ENGINEERING AND DEVELOPMENT SHALL NOT BE LIABLE FOR DIRECT, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGE OR INJURY TO PERSONS OR PROPERTY THAT MIGHT BE CLAIMED AS A RESULT
FROM THE OPERATION OF THE VEHICLE, INSTALLATION, IMPROPER INSTALLATION AND FAILURE OF PARTS
INCLUDING CLAIMS FOR DELAY, LOSS OF PROFITS OR LABOUR. THERE ARE NO WARRANTIES EXPRESSED OR
IMPLIED.
S5000 User Guide
6
2.2 BASELINE SET-UP
This is a general Baseline Set-Up recommended by GRM. It is intended to be tuned track to track.
Geometry
Front
Rear
Ride Height*
[mm]
28
55
Camber
[deg]
-3
-1.6
Castor
[deg]
5.1
-
Toe
[mm]
1.5 OUT
1.5 IN
Anti-Dive+
[%]
20
-
Anti-Lift+
[%]
-
112
Anti-Squat+
[%]
-
-1
Roll Centre+
[mm]
71
80
Suspension
Springs
[lbs/in]
700
1200
Preload**
[Turns]
5
4
Bump Rubber+
[Multimatic]
1x Blue
2x Red
Mandatory Packer+
[mm]
15
7
Additional Packer
[mm]
10
0
Damper
[LSR clicks]
-5
-5
[HSR sweeps]
+5
+5
ARB Setting
[hole;mm]
4
5
Aero
Main Element
[deg]
-
4
Secondary
[set;deg]
E5
29.5
*Measured from the bottom surface of the Plank extended to each axle centreline (not including 5mm skid block).
**0 Turns of preload is right at the point where the spring is no longer loose on a fully extended damper.
+
For information only, not adjustable
S5000 User Guide
7
2.3 CHASSIS IDENTIFICATION
Each Tub has a Manufacturer identification plate bonded to the inside of the cockpit on the LHS of the steering
wheel.
And a Constructor identification plate is also bonded to the inside of the cockpit on the RHS of the steering
wheel.
S5000 User Guide
8
3CAR CHARACTERISTICS
3.1 A - ENGINE
3.1.1 GENERAL INFORMATION
3.1.2 ENGINE POWER CURVE
45
50
55
60
65
70
75
80
85
90
95
100
3500 4000 4500 5000 5500 6000 6500 7000 7500 8000
%
RPM
HP TQ
Engine Information
Type V8 Naturally Aspirated
Capacity 5200 cm3
Bore & Stroke 94 x 93 mm
Maximum Speed 8000rpm
Cooling System Water without thermostat
Fuel Unleaded 98 RON
Lubrication Dry Sump
Engine Management Motec M150
S5000 User Guide
9
3.1.3 ENGINE IDENTIFICATION
S5000 User Guide
10
3.2 B - ENGINE SYSTEMS
3.2.1 COOLING SYSTEM
The car is equipped with two water radiators, one water/oil heat exchanger for the engine oil and a separate
transmission cooling system with a single radiator. A mechanically driven water pump generates the circulation
for the engine coolant.
The coolant capacity is approximately 14L including a maximum of 1.0L of Coolant concentrate, with the level
set by bleeding the system.
While adding coolant mixture to the Header tank, bleed air firstly from the disconnected fitting at the top of the
LH radiator.
Once air has finished escaping from the top of the LH radiator reconnect the fitting and then bleed air from the
disconnected fitting at the top of the RH radiator.
Once air has finished escaping from the top of the RH radiator, reconnect the fitting and continue filling the
system until the header tank/swirl pot is approximately ¾ full when engine is cold.
The maximum coolant temperature must not exceed 100oC.
3.2.2 OIL SYSTEM
The engine has a dry sump oil system with the oil tank located in the bell housing between the engine and the
transmission. The oil level must be checked using Dipstick Part# GRM-AW0470-00 and the oil level maintained
between the minimum and maximum indicators on the dipstick. The oil capacity at the maximum indicator
mark is approximately 8.0L. Oil level must be kept above the minimum mark.
Oil Filter P/N: K&N HP-2010
Tabla de contenidos
