Grizzly T32734 Manual de usuario

NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

(FOR MODELS MFD. SINCE 10/21) #CS22114 PRINTED IN TAIWAN

Introduction

The Model T32734 Gouge Grinding Attachment

secures your spindle gouges, bowl gouges, and

roughing gouges at angles up to 40° for sharp-

ening bevels at repeatable angles and shapes.

The brass knob locks in your tool and doubles

as a thumb rest while rounding gouges. The jig

holds tools up to 19⁄16" wide with shafts between

3⁄16"–13⁄8". Quickly grind fingernail profiles, side

grinds, and simple bevels, as well.

V1.10.21

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

MODEL T32734

GOUGE GRINDING

ATTACHMENT FOR T32732

INSTRUCTIONS

Eye and face injuries and respiratory prob-

lems can occur while operating this tool.

Wear personal protective equipment to

reduce your risk from these hazards.

Keep hair, clothing, and

jewelry away from mov-

ing parts at all times.

Entanglement can result

in death, amputation, or

severe crushing injuries!

Using Gouge Attachment

The gouge attachment secures your gouge and

rests in the V-holder of the long arm to pivot for

bevels, side grinds, and fingernail gouges.

To reduce your risk of

serious injury, read this

entire manual BEFORE

using machine.

Figure 1. Example of gouge attachment in use.

-2- Model T32734 (Mfd. Since 10/21)

4. Loosen wing nut shown in Figure 4, adjust

attachment arm angle to match bevel angle

against grinding wheel, then tighten wing nut

to secure.

3. Rest gouge attachment arm in V-holder and

adjust long arm until gouge bevel contacts

grinding wheel (see Figure 3).

Figure 3. Gouge attachment resting in V-holder.

V-Holder

Gouge Attachment

Figure 4. Gouge installed in attachment and

positioned against grinding wheel.

5. Tilt tool away from grinding wheel, connect

grinder to power, and turn machine ON.

6. Use firm grip to return tool to surface of grind-

ing wheel to perform grinding operation (see

Figure 5). Pivot and move attachment to fol-

low gouge profile.

To use gouge attachment:

1. DISCONNECT GRINDER FROM POWER!

2. Secure gouge in gouge attachment by tight-

ening thumb screw shown in Figure 2.

Figure 2. Gouge secured in gouge attachment.

Gouge

Attachment

Thumb Screw

Figure 5. Gouge attachment in use.

IMPORTANT: Refer to grinder manual or instruc-

tions for information on safely operating your

grinder.

Attachment

Arm

Otros manuales de Accesorios para herramientas eléctricas de Grizzly

Grizzly

Grizzly T31496 Manual de usuario

Grizzly

Grizzly G0555 Manual de usuario

Grizzly

Grizzly G4026 Manual de usuario

Grizzly

Grizzly T10808 Manual de usuario

Grizzly

Grizzly T32058 Manual de usuario

Grizzly

Grizzly H6238 Manual de usuario

Grizzly

Grizzly H7585 Manual de usuario

Grizzly

Grizzly G5749 Manual de usuario

Grizzly

Grizzly H6264 Manual de usuario

Grizzly

Grizzly G1083 Manual de usuario

Grizzly

Grizzly H5664 Manual de usuario

Grizzly

Grizzly T10125 Manual de usuario

Manuales populares de Accesorios para herramientas eléctricas de otras marcas

Bosch

Bosch OSC004 Manual de usuario

Rockler

Rockler 57510 Manual de usuario

Bosch

Bosch RA1054 Instrucciones de montaje

Kitagawa

Kitagawa SC N Series Manual de usuario

Wolfcraft

Wolfcraft FKS 145 Guía rápida

ADAMAS

ADAMAS B32 Manual de usuario

STEINEL PROFESSIONAL

STEINEL PROFESSIONAL 4007841009595 Manual de usuario

Echo

Echo Speed-Feed Universal 400 LH/RH Manual de usuario

SCHUNK

SCHUNK ROTA TB-TBS-EP Instrucciones de uso

Schmid

Schmid RAPID Secure XL Manual de usuario

Drill Master

Drill Master 360X Manual de usuario

Toro

Toro 138-5050 Manual de usuario

jbc

jbc SF-SD Manual de usuario

Bosch

Bosch GTA 3800 Professional Instrucciones de montaje

RG AVAK

RG AVAK MaxDrill Series Manual de usuario

infaco

infaco PW3 Manual de usuario

Gloria

Gloria CUT & BRUSH Manual de usuario

Bench Dogs

Bench Dogs Quad MFT Hinge System Manual de usuario