GREAT PLAINS BD7600 Manual de usuario

Read the operator manual entirely. When you see

this symbol, the subsequent instructions and

warnings are serious - follow without exception.

Your life and the lives of others depend on it!

Illustrations may show optional equipment not

supplied with standard unit.

Table of Contents

Original Instructions 195-614Q

Great Plains

PRE-DELIVERY MANUAL

MODELS BD7600 40 Foot 3-Section Drill

Min-Till Drill

means, including photocopying, recording, or other electronic or mechanical methods, without the prior written

permission of the publisher, except in the case of brief quotations embodied in critical reviews and certain other

noncommercial uses permitted by copyright law.

Trademarks of Great Plains Manufacturing, Inc. include: AccuShot, DrillCommand, Max-Chisel, Row-Pro, Singulator

Plus, Short Disk, Swath Command, Terra-Tine, Ultra-Chisel, and X-Press.

Registered trademarks of Great Plains Manufacturing, Inc. include: Air-Pro, Clear-Shot, Discovator, Great Plains, Land

Pride, MeterCone, Nutri-Pro, Seed-Lok, Solid Stand, Terra-Guard, Turbo-Chisel, Turbo-Chopper, Turbo-Max, Turbo-

Trill, Ultra-Till, Whirlfilter, and Yield-Pro.

Brand and product names that appear and are owned by others are trademarks of their respective owners.

For permission requests, write to the publisher at the address below.

Great Plains Mfg.

1525 E. North St.

P.O. Box 5060

Salina, KS 67402

You can also visit our website at www.greatplainsag.com/en/manuals/905/product-manuals for a full catalog of this

and other manuals.

Ordering Information:

Quantity sales. Special discounts are available on quantity purchases by corporations, associations, and others. For

details, contact the publisher at the address above.

Orders for personal, non-commercial use. Please contact our service department by mail or our website

www.greatplainsag.com.

40 Foot 3-Section Drill Cover

Great Plains | 195-614Q | 04/14/2020 iii

Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . 1

Description of Unit . . . . . . . . . . . . . . . . . . . . . . . . 1

Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . 1

Models Covered . . . . . . . . . . . . . . . . . . . . . . . 1

Document Family . . . . . . . . . . . . . . . . . . . . . . . . . 1

Directional Information . . . . . . . . . . . . . . . . . . . . . 1

Safety Information . . . . . . . . . . . . . . . . . . . . . . . 2

Before Getting Started . . . . . . . . . . . . . . . . . . . . . 2

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Handling and Disposing of Chemicals . . . . . . 3

Operation Noise Hazard. . . . . . . . . . . . . . . . . 3

PTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Tire Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

High Pressure Fluids . . . . . . . . . . . . . . . . . . . 4

Transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Safety Chain. . . . . . . . . . . . . . . . . . . . . . . . . . 4

Safety Lights and Devices . . . . . . . . . . . . . . . 4

Shutdown and Storage. . . . . . . . . . . . . . . . . . . . . 4

Proper Waste Disposal . . . . . . . . . . . . . . . . . . . . 4

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Before Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Tools Required. . . . . . . . . . . . . . . . . . . . . . . . 5

Unload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Remove Anti-Roll Brackets . . . . . . . . . . . . . . . . . 6

Install Center Box. . . . . . . . . . . . . . . . . . . . . . . . . 7

Install Wing Walkboards. . . . . . . . . . . . . . . . . . . . 8

Connect Walkboard Inside End . . . . . . . . . . . 8

Connect Walkboard Ladder End . . . . . . . . . . 8

Install Ladder . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Install Center Walkboard . . . . . . . . . . . . . . . . . . . 9

Install Press Wheels. . . . . . . . . . . . . . . . . . . . . . 10

Unfold Drill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Install Transfer Drive - Ground Drive Drills . . . . 11

Electrical Harness Schematics. . . . . . . . . . . . . . 12

Lighting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Daisy Chain Blockage System . . . . . . . . . . . 13

Daisy Chain Blockage System with Fertilizer 13

Loup Blockage System . . . . . . . . . . . . . . . . 14

Loup Blockage System with Fertilizer . . . . . 15

Hydraulics Schematics. . . . . . . . . . . . . . . . . . . . 16

Opener Lift - Open Center Hydraulics . . . . . 16

Opener Lift - Closed Center Hydraulics . . . . 17

Section Control Hydraulics . . . . . . . . . . . . . . 18

Hydraulic Drive Hydraulics . . . . . . . . . . . . . . 19

Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Hydraulic Hose Connections . . . . . . . . . . . . . . . 20

Electrical Connections . . . . . . . . . . . . . . . . . . . . 20

Hitches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Hitch Height . . . . . . . . . . . . . . . . . . . . . . . . . 21

Drill Leveling. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Center Box Frame Leveling . . . . . . . . . . . . . 22

Opener Frame Clearance. . . . . . . . . . . . . . . 22

Wing Box Alignment . . . . . . . . . . . . . . . . . . . 22

Align Transfer Drive Shaft - Ground Drive . . 23

Truss Tube Tension . . . . . . . . . . . . . . . . . . . 23

Walkboard Leveling . . . . . . . . . . . . . . . . . . . 24

Torque Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Tire Information . . . . . . . . . . . . . . . . . . . . . . . . . 25

Great Plains | 195-614Q | 04/14/2020 1

40 Foot 3-Section Drill Table of Contents Introduction

Introduction

Great Plains wants you to be satisfied with any new

machine delivered. To ease assembly and produce a

properly working machine, read this entire manual

before setting up new equipment.

All information in this manual is current as of

publication. Information contained within is subject to

change to ensure top performance.

Illustrations in this manual were not done during an

actual assembly. For clarity, some illustrations may or

may not include parts, assemblies, and other

components at the same point in an actual assembly.

Safety Information

The safety symbol indicates a potential safety

hazard to persons operating or near the

machine and advises on how to avoid it.

The notice symbol indicates a potential for

machine or property damage from operator

error and advises on how to avoid misuse.

The information symbol indicates useful - but

not crucial - information for machine

operation, assembly, or adjustment.

Description of Unit

The BD7600-40 Drill is a towed seeding implement .

This three section min-till drill has a working width of

40 feet (12.2 m).

The drill has straight arm, double disk openers. The

opener disks make a seed furrow, and seed tubes

mounted between the disks place seed in the furrow.

Press wheels following the opener disks close the

furrow and gauge the opener seeding depth. A

T-handle on the opener body is for seeding depth

adjustments.

The BD7600-40 Drill features active hydraulic down

pressure on the opener frames. When used on a

tractor with closed-center hydraulics, constant down

pressure ensures even opener penetration in uneven

ground. Hydraulic down pressure is adjustable at a

single point.

Intended Use

Use this drill to seed production-agriculture crops in

conventional or minimum tillage applications.

Models Covered

BD7600-40 models with 60 rows on 6-inch row

spacing, 48 rows on 7.5-inch row spacing, and 36

rows on 10-inch row spacing.

Document Family

Directional Information

All directional information in this manual, such as left,

right, front, rear, forward, or backward, is determined

by facing the direction of forward travel of the

machine.

195-614M Operator Manual

195-614P Parts Manual

195-612B Material Rate Manual

40 Foot 3-Section Drill Table of Contents Safety Information

Great Plains | 195-614Q | 04/14/2020 2

Safety Information

The safety symbol indicates a potential safety

hazard to persons operating or near the

machine and advises on how to avoid it.

The notice symbol indicates a potential for

machine or property damage from operator

error and advises on how to avoid misuse.

The information symbol indicates useful - but

not crucial - information for machine

operation, assembly, or adjustment.

Before Getting Started

1. Read this manual in its entirety before attempting

to start and operate the machine.

2. Only use operators that are thoroughly trained by

the owner or trained by someone with the

owner’s consent. The operator must be familiar

with all functions of the tractor and attachments,

and be able to handle emergencies quickly.

3. Maintain attention on operation at all times. Do

not operate if using a smart phone, tablet, or

similar electronic device, and never operate

machine while impaired by alcohol, medication,

any controlled substance, or while fatigued.

4. Do not ever allow passengers to ride the machine

at any time, for any reason.

5. Before operation, make sure that all tractor cab

levers are in their neutral positions and that the

parking brake is engaged.

6. Check brakes, link pins, and other mechanical

parts for wear before using machine.

7. Never wear loose or bulky clothing around

machine. Use additional safety equipment, such

as hard hats, eye and ear protection, safety

boots, etc., as needed.

8. Do not modify the machine. Unauthorized

modification can result in unsafe conditions that

lead to machine damage or personal injury.

Operation

1. Always stop the tractor, put in Park and turn off

engine before leaving the cab. Dismounting from a

moving tractor can cause serious injury or death.

2. Consider turning radius of tractor and implement

in the field. Turning tractor too tight can cause

hitched implement to ride up on wheels which can

result in injury or equipment damage.

3. Pull machine only from the hitch at the end of the

tongue. Never pull from jack stand, safety chain,

or any point other than the hitch.

4. Never leave the tractor cab unattended while the

implement is running. Remove key and turn off

tractor before exiting the tractor cab.

5. Watch your surroundings at all times. Do not

operate with bystanders nearby, and avoid

contacting overhead obstructions.

6. Check that all guards and shields are

undamaged, installed, and secure before

operating implement.

7. Keep children out of the work area. Do not

operate or turn on machine while children are in

the area.

8. Do not operate near ditches, holes, steep slopes,

embankments, or other surfaces which may

collapse under the machine’s weight or tip the

machine over.

9. Never stand between tractor and implement

unless parking brake is applied.

Great Plains | 195-614Q | 04/14/2020 3

40 Foot 3-Section Drill Table of Contents Safety Information

Handling and Disposing of Chemicals

Agricultural chemicals can be dangerous. Improper

use can seriously injure persons, animals, plants, soil

and property.

1. Read chemical manufacturer’s instructions

carefully, and then take appropriate precautions

before use.

2. Wear protective clothing.

3. Wash hands and face before eating after working

with chemicals. Shower as soon as application is

completed for the day.

4. Apply only with acceptable wind conditions. Make

sure wind drift of chemicals will not affect any

surrounding land, people or animals.

5. Dispose of unused chemicals and chemical

waste as specified by the manufacturer. Observe

all the local ordinances and regulations in your

area.

Operation Noise Hazard

1. Use proper ear protection like headphones or

earplugs while working.

PTO

1. Wait until all moving components have

completely stopped before adjusting, cleaning, or

servicing any PTO driven equipment.

2. Before installing or using PTO driven equipment,

read the tractor manual and review the safety

labels attached to the equipment.

3. When operating stationary PTO driven

equipment, always apply the parking brake and

place chocks behind wheels.

4. Stay clear of and never step over any rotating

parts.

Maintenance

1. Understand procedure before doing work. Use

proper tools and equipment.

2. Work in a clean, dry area.

3. Lower the implement. Put tractor in Park, turn off

engine. To prevent unauthorized starting, remove

key before performing maintenance or service

work.

4. Make sure all moving parts have stopped and all

system pressure is relieved.

5. Relieve hydraulic pressure before disconnecting

hydraulic lines or performing any work on the

system.

6. Do not work underneath any hydraulically

supported components. Hydraulics can settle,

leak, or be accidentally lowered. If working

underneath hydraulically supported components

is necessary, secure implement with stands or

suitable blocking beforehand.

7. Disconnect electronic monitor and lighting

harness from the tractor before servicing or

adjusting electrical systems.

8. Before welding, disconnect electronic monitor and

lighting harness from the tractor. Protect hydraulic

lines. Avoid fumes from heated paint.

9. Remove buildup of grease, oil, or debris.

10. Check and replace worn brake lines as needed.

11. Remove all tools and unused parts from

implement before operation.

Tire Safety

1. Check tires for cuts, bulges, and correct

pressure. Replace worn or damaged tires.

2. Tire changing can be hazardous and must be

performed by trained personnel using correct

tools and equipment.

3. Tire explosion and/or serious injury can result from

over inflation. Do not exceed tire inflation

pressures.

4. When removing and installing wheels, use wheel-

handling equipment adequate for weight involved.

5. Tighten wheel bolts only to the specified torque.

40 Foot 3-Section Drill Table of Contents Safety Information

Great Plains | 195-614Q | 04/14/2020 4

High Pressure Fluids

1. Escaping fluid from holes in hydraulic lines is

difficult to spot. Do not use your hands or bare

skin to search for suspected leaks; instead, use a

piece of cardboard or wood. If injured by

escaping hydraulic fluid, see a medical

professional immediately. Exposure can result in

gangrene or severe allergic reaction.

2. Check that hydraulic fittings are tight and all

hydraulic hoses and lines are in good condition

before applying pressure to the system.

3. Wear protective gloves and safety glasses or

goggles when working with hydraulic systems.

Transporting

1. As with transporting any piece of heavy

machinery, comply with all local laws and

regulations before and during transport process.

2. Transport only at recommended transport speed

for implement. Some rough terrains require a

slower speed. Sudden braking can cause a

towed load to swerve and upset.

3. Know transport height and width of implement.

4. Do not tow an implement that, when fully loaded,

weighs more than 1.5 times the weight of towing

vehicle.

5. Keep clear of overhead power lines and other

obstructions when transporting.

6. Do not fold or unfold the implement while the

tractor is moving.

7. Reduce speed when turning, and make as wide a

turn as possible. Turning tractor too tight can

cause implement to tip over.

8. When towing on a trailer, secure implement with

tie downs and chains.

9. When towing on a trailer, sudden braking can

cause a trailer to swerve and upset. Reduce

speed if trailer is not equipped with brakes.

Safety Chain

1. Use a chain with a strength rating equal to or

greater than the gross weight of towed machinery.

2. Replace chain if any links or end fittings are

broken, stretched or damaged.

3. Do not use safety chain for towing.

Safety Lights and Devices

1. Always use safety lighting. Slow-moving tractors

and towed machinery can create a hazard when

driven on public roads. They are difficult to see,

especially at night.

2. If equipped, use flashing warning lights and turn

signals whenever driving on public roads.

3. Use safety devices provided with implement.

4. Keep safety lights and signs clean and visible from

front and rear of machine.

5. Keep lights in operating condition.

Shutdown and Storage

1. Park the tractor and implement on a solid, level

surface where children normally do not play.

2. Lock up toolbars, fold wings, and engage transport

hook.

3. Put tractor in park or set the parking brake. Turn off

engine and remove switch key to prevent

unauthorized starting.

4. Wait for all components to come to a complete

stop before leaving the operator’s seat.

5. Detach the tractor. Secure the implement using

blocks.

Proper Waste Disposal

1. Dispose of waste properly to avoid threatening

the environment and ecology. Potential harmful

waste includes oil, fuel, filters, and batteries.

2. Use a leak-proof container for draining fluids. Do

not use a food or beverage container that may be

mistaken for a consumable product.

3. Do not drain or pour waste onto the ground,

down a drain, or into any water source.

4. Contact your local environmental or recycling center

for the proper way to recycle or dispose of waste.

Great Plains | 195-614Q | 04/14/2020 5

40 Foot 3-Section Drill Table of Contents Assembly

Assembly

High Pressure Fluid Hazard

Escaping fluid under pressure can have

sufficient pressure to penetrate the skin

causing serious injury. Check all hydraulic

lines and fittings before applying pressure.

Use paper or cardboard, not body parts,

and wear heavy gloves to check for

suspected leaks. If injured, seek immediate

medical attention from a physician familiar

with this type of injury.

Negative Tongue Weight Hazard

Raising openers on an unfolded, unhitched

drill will cause drill tongue to rise suddenly,

which can cause serious injury or death.

Make sure drill is hitched securely to tractor

draw bar, and safety chain is securely

attached to tractor before raising openers

and unfolding drill.

Before Starting

Read and understand “Safety Information” on

page 2 before assembling the drill.

Have the drill parts manual on hand for reference

to components.

Use a tractor of sufficient size and horsepower

with at least two remote hydraulic circuits. Refer

to Specifications in the operator manual for

tractor information.

Have at least two people on hand for assembly.

Make sure the assembly area is level and free of

obstructions. An open concrete area is

recommended.

Have all loose components, fasteners, pins and

tools needed for assembly.

Tools Required

Forklift, loader, or overhead hoist with 3000 lb

(1361 kg) capacity.

General hand tools.

Jack stands or blocks and safety chain.

Hoist straps with proper load rating.

Unload

1. Before unloading the drill from the truck trailer,

connect all opener springs (1) to the opener

frames (2) with clevis pins (3) and cotter pins (4).

2. With the drill still on the truck trailer, connect the

transport hydraulics to a suitable tractor. Raise

the drill into transport position.

3. Remove and discard the shipping cylinder locks

(5) from the rockshaft cylinders and transport

hook cylinder.

Equipment Damage Risk

To prevent equipment damage, make sure

all openers are connected and drill is in

transport position before unloading the drill.

4. Unload the mainframe/wing assembly from the

truck. Place onto level ground with enough

clearance to unfold the drill.

71753

71760

40 Foot 3-Section Drill Table of Contents Assembly

Great Plains | 195-614Q | 04/14/2020 6

Remove Anti-Roll Brackets

1. Jack up the rockshaft.

2. Remove the two bolts (1) and nuts (2). Pull down

on the anti-roll shipping bracket (3) to remove.

3. Repeat with the other shipping bracket.

4. While the rockshaft is jacked up, install the two

end rockshaft tires (4). Torque the wheel bolts to

170 lb-ft.

5. Carefully lower the jack and remove.

71804

71805

Great Plains | 195-614Q | 04/14/2020 7

40 Foot 3-Section Drill Table of Contents Assembly

Install Center Box

1. Wrap chains or straps around the 7-inch front

frame tube. Wrap a chain or strap around each

end at the rear of the box. Make sure the chain or

strap is under the box frame and not on the box.

2. Use a hoist or forklift to lift the center box off the

truck trailer. Make sure the chain or strap is

positioned behind the box lid (1).

To avoid damage to box lid, make sure

chain or strap is positioned behind box lid.

Lift the box by the chains or straps only.

3. Position the box to the center section of the

folded drill.

Make sure all electronics, hydraulics hoses, and

hydraulic filter (hydraulic drive only) at the rear of

the tongue is clear and out of the way. If

necessary, disconnect or temporarily remove

parts. Reassemble after the center section if fully

assembled.

4. Secure the center section to the drill tongue as

shown using eight 7/8-inch bolts (2), flat washers

(3), and flange nuts (4).

5. Connect truss tubes (5) to the drill tongue and

center section as shown using clevis pins (6) and

cotter pins.

6. Take slack out of the truss tubes by adjusting the

turnbuckles (7). Do not over-tighten.

position chain

or strap here

position chain

or strap here

position chain

or strap here 71806

71807

Otros manuales para BD7600

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Maquinaria agrícola de GREAT PLAINS

GREAT PLAINS

GREAT PLAINS MC5109 Max-Chisel Manual de usuario

GREAT PLAINS

GREAT PLAINS NTA3010 Manual de usuario

GREAT PLAINS

GREAT PLAINS 1510HDF Manual de usuario

GREAT PLAINS

GREAT PLAINS 3P1006NT-1575 Manual de usuario

GREAT PLAINS

GREAT PLAINS Turbo Max 3.0M Manual de usuario

GREAT PLAINS

GREAT PLAINS Turbo Max C2411H Plus Manual de usuario

GREAT PLAINS

GREAT PLAINS Nutri-Pro NP30A Manual de usuario

GREAT PLAINS

GREAT PLAINS Yield-Pro PL5800 Manual de usuario

GREAT PLAINS

GREAT PLAINS Terra Max HT1100-10 Manual de usuario

GREAT PLAINS

GREAT PLAINS 1200-4800TM Manual de usuario

GREAT PLAINS

GREAT PLAINS LC25 Guía

GREAT PLAINS

GREAT PLAINS MC5109 Max-Chisel Guía del usuario

GREAT PLAINS

GREAT PLAINS BD7600 Manual de usuario

GREAT PLAINS

GREAT PLAINS NTA607HD Manual de usuario

GREAT PLAINS

GREAT PLAINS NTA607HD Manual de usuario

GREAT PLAINS

GREAT PLAINS Yield-Pro Air-Pro YP2425A Manual de usuario

GREAT PLAINS

GREAT PLAINS HT1100-35 Manual de usuario

GREAT PLAINS

GREAT PLAINS BD7600 Guía

GREAT PLAINS

GREAT PLAINS Yield-Pro 3PYPA Manual de usuario

GREAT PLAINS

GREAT PLAINS 3S-5000 Series Manual de usuario

GREAT PLAINS

GREAT PLAINS Ultra-Till I 3030 Series Manual de usuario

GREAT PLAINS

GREAT PLAINS VT1100 Turbo Max Manual de usuario

GREAT PLAINS

GREAT PLAINS Nutri-Pro NP40A Manual de usuario

GREAT PLAINS

GREAT PLAINS 3S-3000HD Manual de usuario

Manuales populares de Maquinaria agrícola de otras marcas

GSi

GSi PNEG-2314 Manual de usuario

Checchi & Magli

Checchi & Magli TEXDRIVE Manual de usuario

Amazone

Amazone Cenius 4003-2TX Manual de usuario

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Manual de usuario

Cima

Cima BLITZ Instrucciones de funcionamiento y mantenimiento

Amazone

Amazone CombiDisc 3000 Instrucciones de instalación

HE-VA

HE-VA Disc-Roller XL Contour Manual de usuario

AGT

AGT AGT-SSFM Manual de usuario

Milestone

Milestone 72-84 Manual de usuario

KUHN

KUHN Hector 3000 Manual de usuario

Krone

Krone X-Disc 6200 Manual de usuario

Eliet

Eliet DZC450 Manual de usuario

Taarup

Taarup BIO+ B4000 Manual de usuario

Garland

Garland SHAKER 310 DPG Manual de usuario

stable comfort

stable comfort StableWall System Manual de usuario

Raven

Raven AccuBoom Manual de usuario

International

International 710 Manual de usuario

Ashland

Ashland HDW-3217-14 Manual de usuario