Grant-bio PS-3D Manual de usuario

Operating instructions

Rotator

PS-3D

-bio

Page 2

Rotator PS-3D

Operating instructions

Version 2.01 - January 2012

Page 3

Rotator

Operating instructions

PS-3D

Contents

1 Safety.....................................................................................................4

2 General Information .............................................................................5

3 Getting Started .....................................................................................6

4 Operation of PS-3D ..............................................................................7

5 Specifications .......................................................................................8

6 Guarantee and service.........................................................................9

Version 2.01 - January 2012

Page 4

Rotator

Operating instructions

PS-3D

The following symbol means:

Caution! Read these operating instructions fully before use and pay particular attention to sections

containing this symbol.

GENERAL SAFETY

Operation of the unit must be carried out according to the given instruction manual.

The unit should be saved from shocks and falling.

The unit must be stored and transported only in a horizontal position (see marking on the package).

After transport or storage dry out the unit (2-3 hrs) before connecting it to the supply voltage.

Before using any cleaning or decontamination method except those recommended by the

manufacturer, user should check with the manufacturer that the proposed method will not damage the

equipment.

Do not make modifications in design of the unit.

ELECTRICAL SAFETY

Connect only to a power supply with a voltage corresponding to that on the serial number label.

Only use the external power supply unit provided with this product.

Ensure that the power switch and external power supply connector are easily accessible during use.

Before moving, disconnect from the mains.

To turn off the unit, disconnect the external power supply from the mains outlet.

If liquid is spilt inside the unit, disconnect it from the external power supply and have it checked by a

competent person.

DURING OPERATION

Do not impede the platform motion during operation.

Do not operate the unit in environments with aggressive or explosive chemical mixtures.

Do not operate the unit if it is faulty or been incorrectly installed.

For indoor use only.

Do not use outside laboratory rooms.

Do not place a load exceeding maximum loading mentioned in p. Specifications.

BIOLOGICAL SAFETY

It is the user's responsibility to carry out appropriate decontamination if hazardous material is spilt on

or inside the equipment.

1. Safety

Version 2.01 - January 2012

Page 5

Rotator

Operating instructions

PS-3D

The PS-3D rotator has been designed to enable up to 7 days reliable continuous operation.

It is suitable for a variety of applications including blood sample mixing, minigel staining / de-

staining washes and blot hybridizations.

The PS-3D provides three-dimensional smooth rotation. Units are supplied with a standard

platform with a non-slip rubber mat. Accessory tube adaptors are available to accommodate

26 tubes with diameter up to 11 mm or choose the versatile dimpled mat adaptor to

accommodate a variety of tube sizes.

The PS-3D rotator is a compact device with a low energy consumption.

2. General Information

Version 2.01 - January 2012

Page 6

Rotator

Operating instructions

PS-3D

3. Getting started

3.1 Unpacking

Remove packing materials carefully, and retain for future shipment or storage of the unit.

3.2 The Rotator set includes:

Standard set

• Rotator PS-3D....................................................................................................1 piece

• A platform with a rubber mat ..............................................................................1 piece

• An external power supply ...................................................................................1 piece

• Operating instructions; CE Certificate .................................................................1 copy

Optional accessories

• PTP-26 Tube adaptor for 26 tubes of up to 11mm diameter ..............................1 piece

• PDM Dimple mat ...............................................................................................1 piece

•

3.4

3.5 Platform installation

Install the platform by inserting the pins on the underside of the platform

into the holes on the supporting platform on the shaker.

Set up:

Place the unit on the horizontal even working surface;

Plug the external power supply into the 12 V socket at the rear side of the unit.

Version 2.01 - January 2012

Page 7

Rotator

Operating instructions

PS-3D

Speed

PS-3D

OFF

4. Operation of PS-3D

4.1 Connect the external power supply unit to the mains socket.

4.2 Place samples on the unit platform (v).

4.3Switch On the Power switch (w).

4.4Use the speed control knob (u) to adjust the shaking speed to the required setting.

4.5 At the end of operation set speed using the regulator knob to the minimum.

4.6 Switch Off the Power switch.

4.7 Disconnect the external power supply from the mains socket.

Version 2.01 - January 2012

Page 8

Rotator

Operating instructions

PS-3D

5. Specifications

5.1 Rotator provides:

• smooth of the platform

• even amplitude across the whole platform of Rotator;

5.2 Operating conditions

The unit is designed for operation in cold rooms, incubators and closed laboratory rooms

at ambient temperature from +4ºC to +40ºC and maximum relative humidity 80% for

temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C.

5.3Specifications

• ....................................................................................5-60 RPM

• Fixed tilt angle ............................................................................................................7°

• Maximum continuous operation time ..............................................................168 hrs

• Maximum loading.................................................................................................0.5 kg

• Platform working area ..............................................................................200x200 mm

• Dimensions with platform (WxDxH) ...............................................235x235x140 mm

• Input current/power consumption...............................................12V, 260 mA / 3.1 W

• External power supply .......................... input AC 100-240 V 50/60Hz, output DC 12V

• Weight with external power supply, not more ..................................................1.4 kg

3D rotation

Speed control range

Grant is committed to a continuous programme of improvement, specifications may be

changed without notice.

Description

Optional accessories

for 26 tubes (up to 11 mm diameter)Adapter PTP-26

Dimmpled mat to prevent different

size tubes from rolling

PDM

Version 2.01 - January 2012

Page 9

Rotator

Operating instructions

PS-3D

6. Guarantee and Service

6.1 Guarantee

When used in laboratory conditions and according to these working instructions, this

product is guaranteed for TWO YEARS against faulty materials or workmanship.

6.2 Service

For service, return for repair to our Service Department in the UK or, in other countries,

to our distributor.

Version 2.01 - January 2012

Page 10

Rotator

Operating instructions

PS-3D

Version 2.01 - January 2012

Tabla de contenidos

Otros manuales de Equipo de laboratorio de Grant-bio

Grant-bio

Grant-bio PHMP Manual de usuario

Grant-bio

Grant-bio ES-20/80C Manual de usuario

Grant-bio

Grant-bio CPS-20 Manual de usuario

Grant-bio

Grant-bio Vortexer PV1 Manual de usuario

Grant-bio

Grant-bio PCV-2400 Manual de usuario

Grant-bio

Grant-bio PHMP Manual de usuario

Grant-bio

Grant-bio PTR-35 Manual de usuario

Grant-bio

Grant-bio RTS-1 Manual de usuario

Grant-bio

Grant-bio PMR-30 Manual de usuario

Grant-bio

Grant-bio PMS-1000i Manual de usuario

Grant-bio

Grant-bio LMC-4200R Manual de usuario

Grant-bio

Grant-bio MPS-1 Manual de usuario

Grant-bio

Grant-bio Platform Rocker PMR-100 Manual de usuario

Grant-bio

Grant-bio MM-1000 Manual de usuario

Grant-bio

Grant-bio LMC-3000 USA Manual de usuario

Grant-bio

Grant-bio PCMT Plus Manual de usuario

Grant-bio

Grant-bio Vortexer PV1 Manual de usuario

Grant-bio

Grant-bio PCV-6000 Manual de usuario

Grant-bio

Grant-bio ES-20/80 Manual de usuario

Grant-bio

Grant-bio LMC-3000 USA Manual de usuario

Grant-bio

Grant-bio Intelli-Stirrer MSH-300i Manual de usuario

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario