Grandvue Muses 801 Manual de usuario
Index
1. Introduction ............................................................. 1
Headset Features
Compatibility
Working Range
Package Content
2. Headset Overview ................................................... 3
3. Getting Started ........................................................ 4
3.1 Wearing your headset
3.2 Installing Battery
Talk, Standby and Stereo Playback Time
LED Indicator and Battery Low
3.3 Turning Your Headset On/Off
3.4 Turning the Built-In Buzzer On/Off
3.5 Controlling Your Headset Volume
3.6 Setting Headset with Bluetooth/Audio mode
3.7 Paring
3.7.1 Pairing Your Headset with Phones
3.7.2 Pairing Your Headset with PCs
4. Using Your Headset ................................................ 8
4.1 Using Your Headset with Phones
Make/Receive/End a Call
Reject a Call
Voice Dialing
Last Number Redial
Call-Waiting
Retrieve a Call to Your Phone
4.2 Using Your Headset with PCs
Reverse / Forward Songs
Pause / Stop Music
4.3 Using Your Headset with other Audio Players
5. Safety Information ................................................ 12
1. Introduction
Features
Muses 801 is a portable wireless communication device with built-in
latest Bluetooth wireless technology. It allows you to listen to stereo
music streamed from Bluetooth-enabled cellular phone or PC, and
allows the media stream to be interrupted to make or receive calls.
Muses 801 also can be used to connect to other personal audio
devices such as MP3 players, radios and CD/VCD/DVD players through
an audio connection cable to listen to music and receive calls at the
same time.
*Audio Player
*Line in Music
*Muses 801
*Stereo Earphone
*Bluetooth
Cell Phone
*Bluetooth PC / Notebook
1
Compatibility
Muses 801 is compatible with the cellular phones or other Bluetooth
enabled devices that support Bluetooth Headset, Handsfree and A2DP
profiles.
Working Range
Muses 801 conforms to Bluetooth class 2 for a range of 30 feet (10M)
in an open space.
Package Contents
- Muses 801 Bluetooth Stereo Headset
- Changeable clip battery cover
- Audio connection cable
- Stereo earphone (optional)
- Mono earphone (optional)
- Bluetooth USB dongle (optional)
- Bluetooth A/V dongle (optional)
2
2. Muses 801 Headset Overview
Multifunction
Button (MFB) Lanyard Hole
Clip Battery Cover
Reverse
Buzzer
Forward
Volume Up
Phone Jack Line-in Jack
Mic
Volume Down
Mode Switch
3
3. Getting Started
3.1 Wearing Your Headset
Muses 801 headset is designed to be worn comfortably with the neck
strap (or neck strap type stereo earphone) over your neck. Or you can
use the provided clip battery cover to clip it on your collar or breast
pocket.
3.2 Installing Battery
Open the battery cover and install one 1.5V AAA Alkaline battery or 1.2V
800 mAh NiMh rechargeable battery. (※DONOT use Zinc-Acid battery
to ensure good working status)
(※Above data are just for reference. Operation time will vary with
different battery quality, capacity and music playback volume. To
maintain longer operation time, please use high quality battery.)
(※If you use the higher volume to play music, Muses 801 headset
may auto turn off without low battery indication after playing music
for 1-1.5 hours. But you still can use the same battery to play
music on normal volume for a couple of hours.)
Battery Type
Mode
1.5V AAA
Alkaline Battery
1.2V AAA 800 mAh
NiMh
Rechargeable Battery
Reference operation time
Stereo
playback
time
Lower Volume 10 hours 8 hours
Normal Volume 8 hours 6 hours
Higher Volume 2 hours 1 hours
Talk time 10 hours 8 hours
Standby time 120 hours 100 hours
4
LED Indicator
Power on / Standby / Working: Blue light flashes
Low battery: When the battery is low, red light will flash continuously.
(※The red light may flash irregularly sometime when playing
music cause of higher power consumed. It's normal, not indicating
low battery.)
3.3 Turn Your Headset On/Off
Turn on: Long press the MFB button for 2 seconds.
You will see blue LED indicator flashes.
Turn off: Long press the MFB button for 2 seconds.
You will see blue LED light go off.
(※When the Muses 801 headset is connected to PC via Bluetooth
USB dongle , please disconnect it with PC first and then press the
MFB button for 2 seconds to turn the headset off.)
3.4 Turning the Built-In Buzzer On/Off
Muses 801 headset is built-in buzzer and it's set to "ON" when shipped.
When you turn the buzzer on, you can hear "Beeee..p!" from the
headset when there's an incoming call. Otherwise, you can hear the
ring tone from the earphone only.
Turn on the buzzer
Press and hold the both buttons + - at the same time until you hear
the "Do Re Mi" tone from the earphone.
Turn off the buzzer
Press and hold the both buttons + - at the same time until you hear
the "Mi Re Do" tone from the earphone.
5
3.5 Controlling Your Headset Volume
Increase Volume: Short press the button +
Reduce Volume: Short press the button -
3.6 Setting Your Headset with Bluetooth/Audio mode
Muses 801 headset offer 2 working modes for Bluetooth mode and
audio mode.
Bluetooth mode:
When you push the mode switch to the position, you can use Muses
801 headset to wireless connect to your Bluetooth enabled cellular
phone, PC or PDA for listening music, make and receive calls at the
same time.
Audio mode:
When you push the mode switch to the position, you can use
Muses 801 headset to connect to your normal MP3 player,
CD/VCD/DVD player through the provided audio cable for listening
music. It also allows you to receive calls from your Bluetooth cellular
phone.
(※There's no power required from the headset. So even you turn
the headset off, you still can use it as an audio player headset.)
6
3.7 Pairing
3.7.1 Pairing Muses 801 headset with your phone
- Please turn the headset off.
- Press and hold the MFB button until both Blue and
Red light indicators flash, then release the MFB button.
- Perform a Bluetooth devices discovery from your phone and
you will see the headset ID "Muses" displayed on your phone
screen. Select "Muses" and enter the default password "1234"
to finish pairing. After the pairing is successful, the red light
indicator will go off and remain blue light indicator flashes.
3.7.2 Pairing Muses 801 headset with your PC
- Make sure your PC has been installed Bluetooth driver first.
- Please turn the headset off.
- Press and hold the MFB button until both Blue and Red light
indicators flash, then release the MFB button.
- Perform a Bluetooth devices discovery from your Bluetooth
application software and double click on the headset icon "Muses"
displayed to active the pairing mode. Enter the default password
"1234" to finish pairing. After the pairing is successful, the red light
indicator will go off and remain blue light indicator flashes.
7
4. Use Your Headset
4.1 Using your headset with phones
- Please push mode switch to position.
- Pairing and connecting the headset with your phone
(please refer to the step 3.7.1).
- Now you can activate the following functions:
Making a call:
Dial the phone number from your phone, then short press the MFB
button of the headset to dial out.
Receive calls:
When there's an incoming call, you will hear the "Beeee..p!" tone from
the headset buzzer or from the earphone. Just short press the MFB
button to pick up the call.
End a call:
Short press the MFB button to end a call.
Reject a call:
When your phone rings or hear the "Beeee..p!" tone from the headset
buzzer, just short press the MFB button for 3 seconds to reject a call.
Redial the last number:
On standby mode, short press the MFB button to radial the last number.
8
Tabla de contenidos
