Gram BULL Manual de usuario
1
EN
USER'S MANUAL
Weighing system
BULL
2
3
INDEX
1. GENERAL DESCRIPTION ............................................................................ 4
2. UNPACKING .............................................................................................. 5
3. INSTALLATION ........................................................................................... 6
4. CHARGING THE BATTERIES ....................................................................... 8
5. TURN ON ................................................................................................. 10
6. TURN OFF ................................................................................................ 12
7. LCD KEYBOARD AND DISPLAY ................................................................. 13
8. FUNCTIONING ......................................................................................... 16
8.1. TARE ............................................................................................ 16
8.2. MEMORY TARE RECORDING ....................................................... 16
8.3. RESETTING .................................................................................. 17
8.4. LCD DISPLAY TEST ....................................................................... 18
8.5. OVERLOAD ALARM ..................................................................... 18
9. CONFIGURATION OPTIONS MENU ......................................................... 19
9.1. BEEP ............................................................................................ 20
9.2. WiFi-X .......................................................................................... 20
9.3. TLU .............................................................................................. 20
9.4. HIGH (Overload alarm) ............................................................... 21
10. ERROR MESSAGES ................................................................................... 22
11. NOTES ..................................................................................................... 23
4
1. GENERAL DESCRIPTION
BULL is a weighing system for forklift trucks that integrates three
independent equipments connected to each other through a wireless
network:
Indicator:
When an object is lifted with the forks, the indicator shows the weight.
At rest, it indicates the battery level of the forks. It allows to operate
the weighing functions of the scale with a simple 11 mechanical keys
interface.
Forks:
Each fork is an independent scale that measures the weight of the load
it lifts. Each fork is equipped with a rechargeable battery with an
autonomy of up to 72 hours of continuous operation.
1
2
1
2
5
2. UNPACKING
BULL indicator and
documentation
SIndicator support
Fork 1
Fork 2
Battery chargers for
forks
6
3. INSTALLATION
Place the indicator holder in the intended housing at the rear of the unit:
Screw the indicator holder firmly onto one of the bars in
the forklift cabin in the position you feel is most
convenient. You will find M6 screws of two different
lengths, 40mm and 70mm, in the packaging.
Place the indicator in its place and use the sprocket on
the bracket to orient it as you wish.
Slide the bracket between the two
guides on the indicator box and push
until the safety stop engages.
7
Mount both forks on the fork lift truck holder by sliding them to the desired
distance from the fork lift truck. Once positioned, secure the fork with the
safety lock to prevent accidental movement.
8
4. CHARGING THE BATTERIES
Weight indicator:
The support battery inside the scale is not removable. To charge the battery,
connect the supplied 12Vdc AC/DC adapter to the scale and plug the adapter
into a 220V / 50Hz outlet.
When the power is on, the indicator shows the battery charge level on the LCD
display by means of a pictogram:
Battery operation. The power supply is not connected. The indicator's charge level is
indicated.
AC/DC power supply connected to the wall outlet.
It is not necessary to keep the indicator on for battery charging, charging
with the indicator off is recommended.
9
Charging the battery of the forks:
Open the battery compartment cover by loosening the two fastening screws.
Remove the rechargeable battery from each fork and connect it to either of
the two chargers provided. Plug the charger into a 220V/50Hz outlet.
It is convenient to recharge both batteries at the same time: The system will
automatically switch off when the battery with the lowest charge is exhausted.
10
5. TURN ON
Press and hold the button / light on the side of each fork until it lights up:
Turn on the weight indicator installed in the truck cabin by pressing the
indicator on/off button:
Tabla de contenidos
Otros manuales de Accesorios de Gram
