Gradus Group Vello BG-C16 Manual de usuario

BG-C16

BAT TERY GRIP

Designed for the

Canon EOS 6D Mark II SLR Camera

USER’S MANUAL

Introduction

Thank you for choosing Vello, and congratulations on

your new BG-C16 battery grip purchase. Enjoy the many

benefits that a battery grip offers, such as extended

shooting time and more control and comfort when

shooting in portrait orientation.

The Vello BG-C16 is compatible with the Canon 6D

Mark II SLR camera. The BG-C16 accepts up to two

Canon LP-E6 or LP-E6N rechargeable batteries. This

grip is equipped with an alternate shutter release

button, AF area selection, AF start button, AF point

selection, AE lock button, and main dial for shooting in

a vertical position.

Please read through this entire

manual before using the B G - C16 battery

grip.

Precautions

The BG-C16 should be used only with the compatible

devices specified in this manual.

Use only with the batteries and battery holders

recommended in this manual.

Cover the power terminals with the contact cap

when the BG-C16 is not in use. This prevents

electrical shorts caused by metal objects touching

the power terminals.

When the battery holder is removed from the

grip, remove the batteries or place the holder in

a container to prevent electrical shorts caused by

contact with other metal objects.

5. If you notice smoke, an unusual smell, or noise from

the battery pack, discontinue use immediately.

Remove the batteries, and take the device to a Vello

authorized reseller.

Turn the grip power off when not shooting vertically.

The battery level may not display properly if batteries

are inserted before mounting the grip.

8. Remove batteries from the grip when not in use.

9. Do not attempt to disassemble.

10. Avoid water or extreme humidity, and keep in a dry

and cool place.

11. Keep out of reach of children.

12 . All images are for illustrative purposes only.

OVERVIEW INTRODUCTION

ASSEMBLY

Overview

Mounting Screw

Aligns with the camera’s tripod socket.

2Guide Pin

Helps align the camera to the grip.

3Attachment Wheel

Secures the grip to the camera.

4Battery Tray Lever

Locks and unlocks the battery

compartment door.

5DC Coupler Cord Mount

Groove for use with the Canon AC

Power Adapter (ACK-E6).

AF Point Selection*

AE/FE Lock*

AF Start*

9OFF/ON switch

10 Camera Battery Chamber Cover

Holder

Stores the cover when the grip is

mounted.

11 Electrical Contacts

Communicate with the camera

electronics. Keep covered when the

grip is not in use.

Contact Cap

Protects grip contacts.

Main Dial*

14 AF Area Selection*

15 Shutter Release*

16 Tripod Socket

17 Hand Strap Mount

Important! Not for use with shoulder

straps.

18 Battery Tray

Holds up to two Canon LP-E6 or

LP-E6N batteries.

* Performs the same function as on the

camera.

OVERVIEW INTRODUCTION

ASSEMBLY

Attaching the Grip

Ensure that the power is

turned off on the camera

and that the power switch

is set to OFF on the battery

grip.

Open the camera

battery chamber cover,

and remove the battery

from the camera battery

compartment.

Slide the camera battery

chamber cover’s locking

pin, as indicated above, and

remove the cover.

To prevent loss, remove the

protective cap and place the

camera battery chamber

cover into the BG-C16

battery cover holder as

indicated above. Swing the

battery chamber cover shut

so that it locks into place.

Connect the BG-C16 grip

to the camera.

Rotate the attachment

wheel in the direction

shown by the arrow until

the grip is firmly tightened.

When removing the grip, turn

the camera power off, remove

the batteries, and replace the

protective contact cap.

OVERVIEW INTRODUCTION

ASSEMBLY

Inserting Batteries

Ensure that the power is

turned off on the camera

and the grip. Use your

fingernail to flip the battery

tray lever so you can rotate

and pull as indicated above,

and slide the battery tray

out of the grip.

Canon LP-E6 or LP-E6N

Batteries: Insert up to

two batteries by placing

them into either slot in the

battery tray, while ensuring

the correct orientation

as shown on the tray.

Household Power Outlet:

The Canon ACK-E6

AC Power Adapter Kit

(sold separately) can be

connected to the grip. Place

the DC coupler through the

small groove on the back of

the grip. Ensure that the

battery holder doesn’t

pinch the cord.

3. Rotate the battery tray lever counterclockwise,

and slide the battery tray all the way into the grip.

Rotate the lever as indicated above, and push the

it back into place to lock the tray.

4. Switch the grip power to ON, and then turn on

the camera’s power. Check the battery level in

the control panel or viewﬁnder.

OVERVIEW INTRODUCTION

ASSEMBLY

Specifications

Power Source One or two Canon LP-E6 or LP-E6N rechargeable batteries.

Works with the Canon AC Adapter Kit ACK-E6.

Operating Temperature 32°F–104°F (0°C–40°C)

Dimensions (H x W x D) 4.4 × 5.8 × 3.4 in. (11 × 14.7 × 8.5 cm)

Weight 8.9 oz. (0.25 kg) excluding batteries

Speciﬁcations and design are subject to change without notice.

Tabla de contenidos

Otros manuales de Accesorios para cámaras de Gradus Group

Gradus Group

Gradus Group impact VE-TTLBAT Manual de usuario

Gradus Group

Gradus Group VELLO PGS-P Manual de usuario

Gradus Group

Gradus Group REMORA Manual de usuario

Gradus Group

Gradus Group Vello Snap-On LCD Screen Protector Manual de usuario

Gradus Group

Gradus Group Kopul CMCS-1 Manual de usuario

Gradus Group

Gradus Group MAGNUS REX DSF-132 Manual de usuario

Gradus Group

Gradus Group impact LSA-CW10 Manual de usuario

Gradus Group

Gradus Group VELLO FlexFrame Manual de usuario

Gradus Group

Gradus Group Raya Brite 10 Manual de usuario

Gradus Group

Gradus Group Vello EZ-FLIP GEL SET Manual de usuario

Manuales populares de Accesorios para cámaras de otras marcas

Viltrox

Viltrox EF-NEX Instrucciones de instalación

Calumet

Calumet 7100 Series CK7114 Manual de usuario

Ropox

Ropox 4Single Series Manual de usuario

Cambo

Cambo Wide DS Digital Series Instrucciones de funcionamiento

Samsung

Samsung SHG-120 Manual de usuario

Ryobi

Ryobi BPL-1820 Manual de operación

Aegis

Aegis ABL-36020P Manual de usuario

Pentax

Pentax Data Back Fc Manual de usuario

Fantasea

Fantasea EyeGrabber F Series Manual de usuario

Honeywell

Honeywell HDZ20HD Manual de usuario

EGO

EGO BA1400T Manual de usuario

Sima

Sima SRW-62 Manual de usuario

Shape

Shape A7SSMKIT Manual de usuario

Slide Kamera

Slide Kamera HST-2 Manual de usuario

Power works

Power works 2902613 Manual de usuario

SES

SES SE-2047-2 Manual de usuario

Olympus

Olympus PT-EP05L Manual de usuario

Starlite

Starlite OctoDome nxt Manual de usuario