GPRINTER GP-80160 Manual de usuario
Wireless printer Installation Guide
1. Connect the Printer to the power and power on the Printer
2. USB driver installation: Install Driver Installer.exe, and restart PC.
3. Plug the USB Dongle into the Computer USB socket; “Prolific
USB-to-Serial COMM Port” will pop up at the right and bottom edge of the
PC monitor.
4. Install the Printer Driver.
During installing the printer driver, when reaching below diagram step, keep all
data as showing in the diagram.
5. Restart the Computer
6. Select “My Computer”, and click the right button of Mouse, select
“properties/hardware/device manager/ports (Com & LPT)”; click “Ports
(COM & LPT), find “Prolific USB-to-Serial COMM Port (COM?)”, “COM?” is
the COM Port of the USB Dongle.
7. Double click “Control Panel”, select “Printer”, click the right button of Mouse,
and click “Open”. Select “GP-80160”, click the right button of the mouse,
select “properties/Ports (configure the COM Port, it should be the same as
the COM Port of the USB Dongle)/Configure (Data should be as below
window showing)
Default baudrate 76mm&80mm series as 19200bps, 58mm series as
9600bps.
Hardware No
And click “OK”.
8. Click “Print test page” to make a printing test.
Tabla de contenidos
Otros manuales de Impresora de GPRINTER
GPRINTER
GPRINTER BABY380 Manual de usuario
GPRINTER
GPRINTER GP-1524D Instrucciones de funcionamiento y mantenimiento
GPRINTER
GPRINTER Pro5 Manual de usuario
GPRINTER
GPRINTER GP-H80300I Manual de usuario
GPRINTER
GPRINTER GP-2120T Manual de usuario
GPRINTER
GPRINTER GP-80250IVN Manual de usuario
GPRINTER
GPRINTER A831 Manual
GPRINTER
GPRINTER GP-80250IIIN Manual de usuario
GPRINTER
GPRINTER PT-280 Series Manual de usuario
GPRINTER
GPRINTER GP-8300TC Manual de usuario
