GOWIN GW1N-1 Manual de usuario

Gowin FPGA Offline Programmer

User Guide

UG291-1.1E,07/15/2019

No part of this document may be reproduced or transmitted in any form or by any denotes,

electronic, mechanical, photocopying, recording or otherwise, without the prior written

consent of GOWINSEMI.

Disclaimer

GOWINSEMI®, LittleBee®, Arora™, and the GOWINSEMI logos are trademarks of

GOWINSEMI and are registered in China, the U.S. Patent and Trademark Office, and other

countries. All other words and logos identified as trademarks or service marks are the

property of their respective holders, as described at www.gowinsemi.com. GOWINSEMI

assumes no liability and provides no warranty (either expressed or implied) and is not

responsible for any damage incurred to your hardware, software, data, or property resulting

from usage of the materials or intellectual property except as outlined in the GOWINSEMI

Terms and Conditions of Sale. All information in this document should be treated as

preliminary. GOWINSEMI may make changes to this document at any time without prior

notice. Anyone relying on this documentation should contact GOWINSEMI for the current

documentation and errata.

Revision History

Date

Version

Description

01/03/2018

1.0E

Initial version.

07/15/2019

1.1E

Description of vcc1and vcc2 voltage

configuration added;

Selection of verification added.

Contents

UG291-1.1E

Contents

Contents...............................................................................................................i

List of Figures.....................................................................................................ii

List of Tables.......................................................................................................ii

1 About This Guide.............................................................................................1

1.1 Purpose .............................................................................................................................. 1

1.2 Supported Products............................................................................................................1

1.3 Related Documents............................................................................................................1

1.4 Terminology and Abbreviation ............................................................................................ 2

1.5 Support and Feedback .......................................................................................................2

2 FPGA Offline Programmer Instructions.........................................................3

2.1 Overview.............................................................................................................................3

2.2 Offline Programmer Instructions.........................................................................................3

2.2.1 Software Download and Driver Installation .....................................................................3

2.2.2 Configuration Interface .................................................................................................... 4

2.2.3 Configure to Programmer................................................................................................ 5

2.2.4 Program four FPGA devices Simultaneously ..................................................................6

2.2.5 Program One FPGAAutomatically..................................................................................7

2.3 Diagram and Description of Programmer Interface Connection ........................................ 8

2.3.1 Programmer Interface Connection Diagram....................................................................8

2.4 Instructions of FPGA Offline Programmer Firmware Update .............................................9

2.5 Notes .................................................................................................................................. 9

2.6 Main features are as follows:............................................................................................10

2.7 Specification and Parameter ............................................................................................10

2.8 Error code and Troubleshooting .......................................................................................10

List of Figures

UG291-1.1E

List of Figures

Figure 2-1 Driver Installed Information .............................................................................................. 4

Figure 2-2 Software Configuration Interface......................................................................................4

Figure 2-3 Software Configuration Interface......................................................................................6

Figure 2-4 Programmer Exterior........................................................................................................6

Figure 2-5 Connecting Programmer to SocketBoard.........................................................................7

Figure 2-6 Programming Interface Connection Diagram...................................................................8

Figure 2-7 Firmware Update..............................................................................................................9

List of Tables

UG291-1.1E

iii

List of Tables

Table 1-1 Abbreviations and Terminology..........................................................................................2

Table 2-1 Programming Time.............................................................................................................10

Table 2-2 Error Code Corresponding to the Fault Information...........................................................11

1About This Guide

1.1Purpose

UG291-1.1E

1(11)

1About This Guide

1.1 Purpose

This guide includes two parts:

1. How to use FPGA offline programmer;

2. Description of Programmer functions.

1.2 Supported Products

The programmer in the guide applies to the following products:

GW1N-1, GW1N-2/2B, GW1N-4/4B, GW1NR-4/4B, GW1N-9, and

GW1NR-9.

Note!

The corresponding data stream files are respectively named as GW1N1.fs, GW1N2.fs,

GW1N4.fs, and GW1N9.fs.

1.3 Related Documents

The latest user guides are available on our Website. Refer to the

related documents at www.gowinsemi.com:

1. UG107, GW1N-1 Pinout

2. UG105, GW1N-2&2B&4&4B Pinout

3. UG114, GW1N-6&9 Pinout

4. DS117, GW1NR series FPGA Products Data Sheet

5. UG116, GW1NR-4&4B Pinout

6. UG801, GW1NR-9 Pinout

1About This Guide

1.4Terminology and Abbreviation

UG291-1.1E

2(11)

1.4 Terminology and Abbreviation

The terminology and abbreviations used in this manual are as shown

in Table 1-1 below.

Table 1-1 Abbreviations and Terminology

Terminology and Abbreviation

Meaning

DFU

Device Firmware Upgrade

FPGA

Field Programmable Gate Array

JTAG

Joint Test Action Group

Identification

1.5 Support and Feedback

Gowin Semiconductor provides customers with comprehensive

technical support. If you have any questions, comments, or suggestions,

please feel free to contact us directly by the following ways.

Website: www.gowinsemi.com

E-mail:[email protected]

+Tel: +86 755 8262 0391

2 FPGA Offline Programmer Instructions

2.1Overview

UG291-1.1E

3(11)

2FPGA Offline Programmer Instructions

2.1 Overview

Offline programmer is a device that offline programs GW1N(R) chips.

It has the features of data confidentiality, portability, multi-path

programming, etc. It is suitable for rapidly large-volume production at the

factory and is convenient for maintenance personnel to carry out. The

offline programmer can simultaneously program four FPGA devices, and

automatically detect device access and program in a single interface,

which greatly increases the mass production rate.

The offline programmer encrypts and saves the data using an

AES-128 advanced encryption algorithm, and the key is saved after

several times of encrypting. AES is a set of internationally recognized,

commonly used and secure encryption standards that ensure securely

delivering data.

2.2 Offline Programmer Instructions

The offline programmer can be configured and managed using the

offline programmer software, such as data stream file management, upper

burner count management, and writer firmware upgrade. The software

supports Windows 7 and above operating systems. After configuration, the

offline programmer can be connected to the FPGA to program.

2.2.1 Software Download and Driver Installation

The relevant software and driver package can be downloaded at

Gowin website or contact the sales for help. Install the driver and the path

is https://www.gowinsemi.com/en/support/devkits_detail/7/. After

installation, use USB cable to connect the programmer and computer, and

USB Serial Port(COMxx) appears on the port, that is, the driver is installed

successfully, as shown in Figure 2-1.

2 FPGA Offline Programmer Instructions

2.2Offline Programmer Instructions

UG291-1.1E

4(11)

Figure 2-1 Driver Installed Information

2.2.2 Configuration Interface

OPmanager.exe is the associated software in the "bin" directory. Open

OPmanager.exe, and the configuration options are shown in Figure 2-2.

Figure 2-2 Software Configuration Interface

1. Programming File: The selected one is GW1N1.fs. Open the

management tool and generate the key randomly, encrypt the data

stream files and store them in the programmer.

2. Vcc1 voltage is set as1.2v, Vcc2 is set as 3.3v. The supported voltages

are: 1.0v, 1.2v, 1.5v, 1.8v, 2.0v, 2.5v, 3.3v.

3. Verification: Options are the status code, read-back, or no verification.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de GOWIN

GOWIN

GOWIN DK START GW2AR18 V1.1 Manual de usuario

GOWIN

GOWIN GW1NR Series Manual de usuario

GOWIN

GOWIN RISCV Manual de usuario

GOWIN

GOWIN DK-START-GW1NR9 V2.1 Manual de usuario

GOWIN

GOWIN DK-GoAI-GW2AR18QN88P Manual de usuario

GOWIN

GOWIN DK START GW1NZ-LV1FN32C6I5 Manual de usuario

GOWIN

GOWIN GW1NS Series Manual de usuario

GOWIN

GOWIN DK-START-GW1NR9 Manual de usuario

GOWIN

GOWIN GW1N-LV9LQ144C6I5 V1.1 Manual de usuario

GOWIN

GOWIN GW1NS Series Guía de inicio rápido

GOWIN

GOWIN DK-START-GW2A55-PG484 V1.3 Manual de usuario

GOWIN

GOWIN GW1N Series Manual de usuario

GOWIN

GOWIN EVAL-pSRAM-GW1NR4 Guía de configuración

GOWIN

GOWIN DK-START-GW2A55-PG484 Manual de usuario

GOWIN

GOWIN GW1NSER Series Manual de usuario

GOWIN

GOWIN DK-START-GW2A18 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario