Goodmans MICRO1470DABI Manual de usuario

MICRO1470DABI

IMPORTANT: Please read all instructions carefully before use and keep for future reference

CD Micro System with Digital Radio and iPhone Dock

User Guide

Introduction

It's really simple to use; you can fully operate your Micro System with Docking Station using

the supplied Remote Control.

Throughout this User Guide the Micro System with Docking Station will be referred to as the

Micro System.

Safety is important

Use of any electrical equipment should be undertaken with care. Please read the Safety

instructions on pages 20 and 21 before you operate this Micro System.

Thank you for choosing this Micro System with Docking Station. Not only can you

listen to your favourite radio stations and CDs, but you can also listen to all the

songs stored on your iPod.

Contents

CD Micro System with Digital Radio

and iPhone Dock

Remote Control

(1 x battery for remote control)

This User Guide

Your Micro system.............................4

Get going..........................................6

Daily Use..........................................7

Using the Clock or Timer and Sleep......8

Using the radio……..........................9

Using the iPhone dock…………….....13

Using the CD...………………...14

Using the Aux Input …………...17

Other functions.........................17

Specifications…………...........19

What’s in the box

Trouble shooting……............... 18

Safety………………...............20

Your Micro system

Front

CD Door

iPod CONNECTOR OPEN/CLOSE

LCD Display IR Sensor

FUNCTION Button

MENU/INFO Button

CLOCK Button

TIMER BUTTON Button

PRESET (UP or DOWN)Button

VOLUME Knob

PRESET/MEMORY Button

HEADPHONES Socket

SKIP/TUNE SEARCH

(UP or DOWN)Button

PLAY/PAUSE/SCAN Button

STOP Button

SELECT/FM MO./ST. Button

STANDBY/ON Button

FM Antenna

SPEAKER Terminals LINE IN Socket

AC Cord

POWER Switch

Top

Rear

Your Micro system

Remote control

CLOCK Button

RANDOM Button

PRESET/MEMORY Button

FUNCTION Button

MENU/INFO Button

REPEAT Button

SELECT/MONO/ST. Button

SKIP/TUNE SEARCH DOWN Butto n

EQ Button

MUTE Button

VOLUME “-” Button

INTRO Button

VOLUME “+” Button

SLEEP Button

TIMER Button

SKIP/TUNE SEARCH UP Button

PLAY/PAUSE/SCAN Button

STANDBY Button

STOP Button

PRESET DOWN Button PRESET UP Button

Using remote control

Press down on the compartment cover, and

slide the cover off to open the compartment.

Place the CR2032 battery in the remote control

according to the polarity markings("+" and "-”).

Place the cover into the compartment,

press down lightly, and push it inside until it

snaps on.

iPod/iPhone dock

Any iPod/iPhone can be connected to the Micro System

to allow all your songs to be played through the Micro

System speakers.

Place your iPod/iPhone Adaptor into the recess on the top

of the Micro System and carefully insert your iPod/iPhone

into the Adaptor.

Remark: The dock adaptor is not included.

Installing the speaker wire to the speaker terminals

1. Speaker Connection;

Extend the SPEAKER WIRES and

connect them to the SPEAKER

TERMINALS.

2. Power Cord Connection;

Before using the unit, connect the AC Power

Cord to the AC outlet. Turn on the main switch on

the rear of the unit.

BATTERY

COMPARTMNT

OPEN/CLOSE

Please remove the plastic tab

before using the unit

02 Get going

Press the STANDBY/ON button on the unit or on the remote control to switch the

unit on.

Select the desired source (DAB, FM, iPod, CD, AUX) by pressing the FUNCTION

button.

Adjust the volume with the VOLUME (+ or -) control on the unit or the remote

control.

Press the STANDBY/ON button on the unit or the remote control again to switch

the unit into standby mode.

Power/standby

DON'T FORGET!

To save energy when the Micro System is not used for long periods, turn the

power off at the main power switch on the rear of the unit.

Daily Use

Get going

Using Earphones

Connect earphones to the earphone socket on the right hand side of the front

panel. When earphones are used the speaker sound will be muted.

Using the Clock and Timer

Manual clock setting

The clock will be automatically synchronized to the DAB clock if you can receive DAB

signals in your location. If you can only receive FM, then you can set the clock manually.

The manual clock setting must be done in standby mode.

Ensure the unit is in Standby mode.

Press the CLOCK button, the hour digits flash in the display, press the SKIP/TUNE

SEARCH (UP or DOWN) button on the unit or the remote control to set the correct hour,

then press the CLOCK button again to confirm.

After the hour is set, the minute digits will then flash, press the SKIP/TUNE SEARCH

(UP or DOWN) button to set the correct minute.

When the display shows the correct time, press the CLOCK button again to confirm,

the manual clock setting is now complete.

Press the CLOCK button in any mode to briefly display the current time. The clock will

display for 5 seconds then the unit will return to the previous operation.

Synchronise the clock to DAB local time

Press the STANDBY/ON button on the unit(or remote control) once to switch the unit

on.

Press the FUNCTION button on the unit(or remote control) to select DAB mode.

Tune to a DAB station and the clock will be automatically synchronized to the DAB

local time.

This function allows you to switch on and off the system at a desired time and mode:

Press the TIMER button to toggle the timer function between on and off, the display will

show “Timer on” or “Timer Off ”. The display will show “ ” to indicate timer function is

on.

To set the On timer, press and hold the TIMER button until the display shows “On Timer”

and the “hour” digit of the timer will flash.

Press the SKIP/TUNE SEARCH (UP or DOWN) button to set to the desired hour, then

press the TIMER button to confirm, first set the hour and finally the minute.

DON'T FORGET!

Clock Setting

Timer Setting

Using the Clock and Timer

To Set Sleep Function (on the remote control)

This function allows you to program the system to switch off itself after a set period of

time. You can set the sleep time in power on mode:

To activate the sleep function, press the SLEEP button on the remote control, the

display will show “Sleep Timer-OFF,90, 80,70,60, 50, 40,30,20,10” and flash.

When the display shows your desired sleep time, release the button, the sleep timer

is now activated. When the desired sleep time is reached, the unit will switch off to

standby mode.

To cancel the sleep timer, press the SLEEP button once again, the sleep function will

turn off.

The unit will now enter the timer off setting, the display will show “Off Timer” and the

“hour” digit will flash. Press the SKIP/TUNE SEARCH (UP or DOWN) button to set to the

desired hour, then press the TIMER button on the remote control to confirm, first set

the hour and finally the minute.

Finally press the SKIP/TUNE SEARCH (UP or DOWN) button to select the timer on

mode - DAB, FM, CD or iPod then press the TIMER button to confirm. The timer setting

is now completed.

To check the timer setting, repeatedly press the TIMER button, until the display

shows the on timer and the off timer setting.

Press the TIMER button again, the timer Volume indicator will flash on the display,

adjust the timer volume higher or lower by pressing the SKIP/TUNE SEARCH

(UP or DOWN) button.

Using the radio

Listening to radio

This unit carries a single lead wire DAB/FM antenna. To obtain the best performance, you

should fully extend the wire antenna and adjust the position as well as the direction until you

find the best reception for ideal DAB reception. Always maintain the wire antenna in a vertical

position (Fixing it upward or downward behind the unit) is highly recommended.

DAB mode

When the unit is powered up for the first time, it will be in standby mode, and the display will

show “Welcome to digital radio”.

Using the radio

Press the STANDBY/ON button on the unit (or remote control) to turn the radio on, it will

automatically enter into the DAB mode and perform the Autotune Quick scan function.

During the scan, the display will show “Searching …” together with a slide bar that indicates

the progress of the scan and the amount of stations that have been found so far. Once the

scan has finished, the radio will select the first alphanumerically found station. To explore the

found stations, Press the SKIP/TUNE SEARCH (UP or DOWN) buttons to scroll through the

station list.

DAB Autotune Full scan mode

Full scan will search for all DAB Band III channels. After the scan has finished, the first

alphanumerically found station will be automatically selected.

To activate autotune full scan, press and hold the PLAY/PAUSE/SCAN button on the

unit (or remote control) to enter into the “Autotune Full scan” mode, the display will

show “Searching...” and a slower progressing slide bar.

All the stations that have been found will be stored automatically, to explore the

stations that have been found, press the SKIP/TUNE SEARCH ( UP or DOWN) to scroll

through the station list.

DAB Manual tune

To select manual tune, press and hold the SELECT button on the unit

(or remote control) to enter the “Manual tune” mode.

Press the SKIP/TUNE SEARCH (UP or DOWN) button to scroll through the DAB

channels, the display will show “5A to 13F” and their associated frequencies.

W hen your desired frequency appears in the display, press the SELECT button to

confirm. The name of the station group (ensemble/multiplex) will be displayed.

Press the MENU/INFO button to see what stations are present on the found

ensemble/multiplex.

Secondary Services

On some occasions you will see a “>” symbol after the name of the station, this

indicates that there are secondary services available to that station. These secondary

services contain extra services that relate to the primary station. E.g. a sports station

may want to add extra commentaries. The secondary services are inserted directly after

the primary station. To select the secondary station, press the SELECT button on the

remote control when the “>” appears in the display.

DON'T FORGET!

Otros manuales de Sistema estéreo de Goodmans

Goodmans

Goodmans IPHONE MICRO1468I Manual de usuario

Goodmans

Goodmans 335105 Manual de usuario

Goodmans

Goodmans GMN10040MP3 Manual de usuario

Goodmans

Goodmans MICRO1109IP Manual de usuario

Goodmans

Goodmans MICRODAB18BT Manual de usuario

Goodmans

Goodmans GMC1042MP3 Manual de usuario

Goodmans

Goodmans GMS880 Manual de usuario

Goodmans

Goodmans GMS950R Manual de usuario

Goodmans

Goodmans 4160AV Manual de usuario

Goodmans

Goodmans MICRO1530 Manual de usuario

Goodmans

Goodmans GMC1502WF Manual de usuario

Goodmans

Goodmans 6160 Manual de usuario

Goodmans

Goodmans GMC1034DAB Manual de usuario

Goodmans

Goodmans 2719 Manual de usuario

Goodmans

Goodmans GMC 1034DAB Manual de usuario

Goodmans

Goodmans MICRO 1109 Manual de usuario

Goodmans

Goodmans 4212 Manual de usuario

Goodmans

Goodmans GMN02BT Manual de usuario

Goodmans

Goodmans MICRO 1930DVD Manual de usuario

Goodmans

Goodmans 329582 Manual de usuario

Goodmans

Goodmans MICRO 1465i Manual de usuario

Goodmans

Goodmans GMC01 Manual de usuario

Goodmans

Goodmans MICRODAB16BT Manual de usuario

Goodmans

Goodmans MICRO1103 Manual de usuario

Manuales populares de Sistema estéreo de otras marcas

LG CM3330B Manual de usuario

Sony

Sony SS-CEP50 Manual de usuario

Cetacea Sound

Cetacea Sound CVS-II Manual de usuario

Aiwa

Aiwa XR-H66MD Manual de usuario

Denon

Denon UCD-250 Manual de usuario

Sanyo

Sanyo DC-MX41i Manual de usuario

Sharp

Sharp CD-ES600V Manual de usuario

Exibel

Exibel BDX600-UK Manual de usuario

Sanyo

Sanyo DC-F320 Manual de usuario

Philips

Philips FWM583X Manual de usuario

Sharp

Sharp CD-C462 Manual de usuario

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Manual de usuario

Aiwa

Aiwa XR-EM70 Manual de usuario

Cyrus

Cyrus Lyric Manual de usuario

Philips

Philips MCM159/98 Manual de usuario

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Manual de usuario

RCA

RCA RS3965SB Manual de usuario

Sharp

Sharp XL-UH240 Manual de usuario