Golander pump CT3000F Manual de usuario

CT3000F Intelligent Dispensing Gear Pump

Operating Manual

Contents

Safety Precautions...............................................................................1

1 Introduction.......................................................................................2

2 Functions and Features.....................................................................2

3 Specifications....................................................................................3

4 Components and Connectors............................................................4

5 Display Panel and Operating Keypads...............................................5

5.1 Keypad ...................................................................................5

5.2 LCD Touch Screen Display......................................................6

5.3 System Settings....................................................................11

6 External Control Interface................................................................17

7 Operation Instructions.....................................................................18

7.1 Before Operation...................................................................18

7.2 Power Connection.................................................................18

7.3 Install pump head and tubing.................................................18

7.4 First Run Wizard ...................................................................20

7.5 Flow Rate Calibration ............................................................21

7.6 Working Mode.......................................................................25

7.7 External Control Mode...........................................................29

7.8 Communication Mode............................................................31

7.9 Footswitch.............................................................................32

8 Maintenance...................................................................................34

8.1 Warranty ...............................................................................34

8.2 Regular Maintenance ............................................................34

8.3 Malfunction Solutions ............................................................34

9 Dimensions.....................................................................................36

10 Naming Rule.................................................................................37

11 Suitable Pump Heads....................................................................37

Golander CT3000F Dispensing Gear Pump

Safety Precautions

Danger

•Please use the correct AC power voltage source shown on the

sticker attached tothe equipment to avoid any damage. Please do

not open the case. It may cause malfunction or electric shock. For

maintenance, please contact the manufacturer or distributor

directly.

•To install or remove the pump head, please first turn off the power

supply. Handle the flange of the pump head carefully and refrain

from using pliers to clamp it, as this may cause inner core

displacement or even permanent damage to the pump.

Warning

•Tubing breakage may result in fluid being spayed from the pump.

Take appropriate measures to protect the operator and

equipment.

•Always remove power from the pump before attempting any

maintenance or cleaning operation.

•Remove power from the pump before connecting or

disconnecting the external control device or communication

interface.

•The pump is equipped with a grounded plug, and it must remain

well–grounded at all times.

•This product is not designed for, nor intended for use in patient-

connected applications, including, but not limited to, medical and

dental use.

•Avoid any foreign bodies, including sealant or Teflon tape, from

entering the pump when sealing the tubing. Only remove the two

covers on the pump head when installing a connector or tubing,

•It is strongly recommended that when using the pump, especially

for the inlet, the tubing size should correspond to the pump's

Golander CT3000F Dispensing Gear Pump

capacity to avoid cavitation caused by inadequate fluid leading to

abnormal wear. Under no circumstances should the pressure

between the inlet and outlet exceed 20 bar / 290 psi.

•It is strongly recommended to add a filter to the pump's inlet to

filter out particles larger than 10 um to prevent abnormal wear and

tear of internal components. Ensure the filter surface area is large

enough to avoid pressure loss in the loop. Regularly check the

filter to ensure it functions effectively. If a vacuum gauge is

installed after the filter, and the vacuum increases by more than

0.1 bar, clean or replace the filter.

•The gear pump can only transfer liquid in one direction.

1Introduction

CT3000F is a high-performance, low-noise micro gear pump, providing a

speed range from 50 to 3000 rpm, with a 1 rpm resolution. Its brushless

servo motor and stainless-steel magnetic drive pump head enable the

continuous and smooth transfer of fluids. The color LCD touch screen

offers an intuitive and clear display, while the various working modes

make it suitable for a wide variety of uses. Equipped with a standard

MODBUS RS485 interface, the pump can be easily controlled by external

devices, such as computers, human-machine interfaces, or PLCs.

2Functions and Features

•Compatible with variable pump heads

•Suitable for high-viscous and high-pressure liquid transfer

•Minimal pulsation and low noise operation

•Magnetic coupling drive, easy maintenance

•Brushless servo drive, high efficiency, maintenance free

•Color LCD display, touch screen

•Displays and controls flow rate

•Multiple working modes

•Includes a flow calibration wizard for accuracy

•Intelligent temperature control

Golander CT3000F Dispensing Gear Pump

•External signal controls start/stop/dispensing; external analog

signal adjusts speed

•RS485 MODBUS communications interface

•Stainless steel case

3Specifications

Pump Head MS204, MS209, MS213

(PEEK gear material)

Communication

RS485, supports Modbus communication

protocol

Display

Color LCD display

Flow Range

15-2700 mL/min

Speed Range

50-3000 rpm/min

Speed Resolution

1rpm

Liquid Viscosity

≤200cSt

Particle Size

≤10um

Operation

Keypad and touchscreen

Control Mode

Flow Mode, Time Dispense, Volume

Dispense, Copy Dispense

Display Mode Color LCD

External Control

5V (12V/24V optional) to control Start/Stop

0-5V (0-10V,4-

20mA optional) to control

speed

Power Supply

AC 100-240V, 50Hz/60Hz

Consumption

<150W

Working Environment Temperature 0-40°C, humidity <80%

Dimensions (LxWxH) 320x150x237mm (12.6x5.9x9.3inch)

Drive Weight

5.5kg (12.1lbs)

P Standard

IP31

Golander CT3000F Dispensing Gear Pump

4Components and Connectors

Handle

Control Pane

Pump Head Holder

Magnetic Coupling Drive

Pump Head

Sticker

External Control Port

Power Switch

Power Plug

Cooling Fan

Figure 1. Components and Connectors

Golander CT3000F Dispensing Gear Pump

5Display Panel and Operating Keypads

Display key

Prime Key

LCD touch screen

Start/Stop

Working mode

Figure 2. Display Panel

5.1 Keypad

START/STOP Key. Press to start or stop the drive.

DISP

DISPLAY Key. Use to switch the display mode.

PRIME Key. Press to operate the pump at the maximum

allowable speed. Press again to return to the previous state.

MODE key. When the drive is not running, use this key to change

the working mode.

MODE

Golander CT3000F Dispensing Gear Pump

5.2 LCD Touch Screen Display

15.00mL/min

＋－

MS204 50 RPM

AB C D E

I J K L M N

Flow 25ºC

Figure 3. Main Display Screen

5.2.1 A - Keypad Lock

Press the icon to lock/unlock the keypad. When the keyboard is

locked, a user cannot modify the control mode and system parameters.A

Password can be set to unlock the keypad, preventing accidental

changes to the system parameters.

Keypad locked

Keypad unlocked

Figure 4. Keypad Lock

Golander CT3000F Dispensing Gear Pump

5.2.2 B - Tone Button

Press the icon to turn on/off the key tone.

Tone on

Tone off

Figure 5. Key Tone

5.2.3 C - Control Mode

Press the icon to access the Control Mode window, where you can

choose from four available control modes as shown below:

Control Mode

Internal Ctrl

Current Ctrl

Foot Ctrl

Voltage Ctrl

Figure 6. Control Mode

•Internal Ctrl - Internal Control Mode. Operate the pump using the

keypad and touch screen.

•Foot Ctrl- Footswitch Control Mode. Footswitchcontrols start/stop,

while utilizing the keypad and touch screen for other operations.

•Current Ctrl- Current Control Mode. An external 4-20mA analog

current signal controls the rotating speed, and a logic level signal

controls start/stop. The keypad is disabled in this mode.

•Voltage Ctrl - Voltage Control Mode. An external 0-5V or 0-10V

analog voltage signal controls the rotating speed, and a logic

Golander CT3000F Dispensing Gear Pump

level signal controls start/stop. The keypad is disabled in this

mode.

Internal Control

Mode Footswitch

Control Mode Current Control

Mode Voltage Control

Mode

Figure 7. Control Mode Icon

5.2.4 D - Quick Settings

Press the icon to access the quick setting interface to reset the

accumulated liquid volume and the time. Under the fluid volume dispense

mode, time dispense mode and copy dispense mode, there are five

groups of preset data. Use the Prev key and Next key to select the

desired group. The settings displayed on the main screen will adjust

accordingly.

Quick Settings

Return

Cumulative Volume Clear

Cumulative Cycles Clear

Quick Settings

Return

Cumulative Volume Clear

Cumulative Cycles Clear

No.1: 5.000 mL 001.0s

6.000 mL/min 1 T

NextPrev

Flow Mode

Other Modes

Figure 8. Quick Settings

5.2.5 E - System Settings

Press this icon to access the System Settings menu and change the

parameters shown on the screen.

Tabla de contenidos

Otros manuales de Bomba de agua de Golander pump

Golander pump

Golander pump DT15-14 Manual de usuario

Golander pump

Golander pump BT100S Manual de usuario

Golander pump

Golander pump BT100L Manual de usuario

Golander pump

Golander pump KZ25 Manual de usuario

Golander pump

Golander pump BT100F Manual de usuario

Golander pump

Golander pump BT103S Manual de usuario

Golander pump

Golander pump BT103S Manual de usuario

Golander pump

Golander pump WT300F Manual de usuario

Golander pump

Golander pump BQ80S V2 Manual de usuario

Golander pump

Golander pump FG600S Manual de usuario

Golander pump

Golander pump WT600F-65 Manual de usuario

Golander pump

Golander pump WG600S Manual de usuario

Golander pump

Golander pump BT-F NEW Manual de usuario

Manuales populares de Bomba de agua de otras marcas

Neptun

Neptun NPHW 5500 Manual de usuario

Sensidyne

Sensidyne Gilian BDX-II Instrucciones de instalación y funcionamiento

Draper

Draper 47808 Manual de usuario

Trolla

Trolla 12820 Manual de usuario

Sunfab

Sunfab SVH Series Manual de usuario

WilTec

WilTec 50740 Manual de usuario

Fieldmann

Fieldmann FVC 5015 EK Manual de usuario

Everbilt

Everbilt EFSUB5-122HD Manual de usuario

Graco

Graco Husky 3300e Manual de usuario

esotec

esotec 101018 Manual de usuario

moyno

moyno 2000 CC Manual de usuario

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manual de usuario

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guía de solución de problemas

DUROMAX

DUROMAX XP WX Series Manual de usuario

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manual de usuario

Franklin Electric

Franklin Electric IPS Manual de usuario

Xylem

Xylem e-1532 Series Manual de usuario

Milton Roy

Milton Roy PRIMEROYAL Manual de usuario