Goji GTCNBBT17 Manual de usuario
Wireless Neckband Headphone
Instruction Manual
GTCNBBT17
Contents
Safety Warnings...............................................................4
Unpacking........................................................................6
Product Overview............................................................7
Top View............................................................................................ 7
Bottom View.................................................................................... 7
Charging the Battery.......................................................8
Switching On/O .............................................................9
Bluetooth Pairing ..........................................................10
Operation .......................................................................11
Reset the Headphones ..................................................12
Hints and Tips.................................................................12
Specications.................................................................13
4
Safety Warnings
• For trac safety, do not use earphones while driving
or cycling.
Damage
• Please inspect the unit for damage after unpacking.
• Do not continue to operate the unit if you are in any
doubt about it working normally, or if it is damaged in
any way - switch o, unplug from the mains socket and
consult your dealer.
Temperature
• Avoid extreme degrees of temperature, either hot or
cold. Place the unit well away from heat sources such as
radiators or gas / electric res.
• Avoid exposure to direct sunlight and other sources
of heat.
Naked Flames
• Never place any type of candle or naked ame on the
top of or near the unit.
Interference
• Do not place the unit on or near appliances which may
cause electromagnetic interference. If you do, it may
adversely aect the working performance of the unit,
and cause a distorted sound.
5
Earphones
• Listening to loud sounds for prolonged periods
of time may permanently damage your hearing.
• Before putting on earphones, turn the volume
down then put the earphones on and slowly
increase the volume until you reach a comfortable
listening level.
6
Thank you for purchasing your new
product.
We recommend that you spend some time
reading this instruction manual in order that you
fully understand all the operational features it
oers. You will also nd some hints and tips to
help you resolve any issues.
Read all the safety instructions carefully before
use and keep this instruction manual for future
reference.
Unpacking
Remove all items from the packaging. Retain the
packaging. If you dispose of it please do so according
to local regulations.
The following items are included:
• Main Unit
• USB Charging Cable
• 3 set of Silicon Buds
• Carry Pouch
• Instruction Manual
7
1. button
• Increase volume
• Go to next track
2. button
• Multi-functional
3. button
• Decrease volume
• Go to previous track
4. Status indicator
5. Microphone
1. Charger connector
2. ON/OFF switch
• Switch the earphones on/o
Product Overview
Top View
Bottom View
1
2
3
1
2
4
5
8
Charging the Battery
When using the unit for the rst time, charge it fully
rst.
1. Connect the USB charging cable to the earphones.
2. Connect the other end of the USB charging cable to
a powered USB device.
Status LED Indicator
Low battery The red indicator will flash slowly.
Charging The red indicator will light up.
Fully charged The blue indicator will light up.
While charging the earphones, the Bluetooth
function will be disabled.
9
Switching On/O
1. Slide ON/OFF to ON.
• If the earphones are already paired with a
Bluetooth device before, it will automatically
connect with the last paired device when both
are in pairing mode.
2. To switch the unit o, slide ON/OFF to OFF.
10
• You can pair the earphones with another
device at the same time.
• Earphones will automatically detect sound
source from paired device. Sound will not
occurs with 2 devices.
Bluetooth Pairing
1. Switch on the earphones.
2. Press and hold for 3 seconds to enter Bluetooth
pair mode. The red and blue indicator starts ashing
rapidly and alternately.
3. Activate the Bluetooth feature on your Bluetooth
device and start searching. Then select
“GTCNBBT17”.
4. If necessary, enter the passcode,“0000”, to pair and
connect the earphones. Some device also ask to
conrm the headset connection after paring.
5. The blue indicator will blink and the earphones
will beep after you have successfully paired the
earphones.
Tabla de contenidos
Otros manuales de Auriculares de Goji
Goji
Goji GINBT14 Manual de usuario
Goji
Goji GSPINBT16 Manual de usuario
Goji
Goji Neckband Bluetooth GINBTSP13 Manual de usuario
Goji
Goji GONBT15 Manual de usuario
Goji
Goji GSHOKBT18 Manual de usuario
Goji
Goji G4IEBK13X Manual de usuario
Goji
Goji G4BOEBK13X Manual de instrucciones
Goji
Goji GTCONBK16 Manual de usuario
Goji
Goji GONBT14 Manual de usuario
