Gogoro Smartscooter 1 Manual de usuario
Gogoro 1 Smartscooter®
Owner Manual
Copyright© 2019 Gogoro Taiwan Limited All rights reserved. Any portion of this user manual shall not be forwarded,
reproduced or copied in any form unless a prior written consent is received from Gogoro Taiwan Limited.
Manufacturer: Gogoro Taiwan Limited
Address: 33, Dinghu Rd., Guishan Dist., Taoyuan City, Taiwan 33378
Tel:03-273-0900
Service Centre: 0800-365-996
Version：OM0021902001_EN
Series (Model): Gogoro 1 and S1 model year 20
iQ Version： 5.0
Contents
1.Before You Hit the Road 3
Safety Notice 3
24-HOUR Roadside Assistance 4
Names and Functions of the Vehicle 4
2.Locking, Unlocking, Power On and Opening Trunk 12
Lock 13
Opening the Luggage Compartment 14
Hibernation Mode 15
3. Moving and Stopping 16
Startup and Takeoff 16
Regenerative Braking 18
Reversing 19
Motor Shutoff and Locking Scooter 19
Smart Mode 20
Super Boost Mode 20
Low Energy Mode 21
Overheat Protection 22
Fall Down Protection 23
4. Battery exchange 24
GoStation® 24
Replacing batteries 24
5. Smartphone Application and Personalisation 27
Downloading and Installing the Gogoro® App 27
Pairing Your Phone with Smartscooter® 27
Introduction to Gogoro® App 28
6. Maintenance 31
Check the Following Before Your Ride 31
Daily Cleaning and Maintenance 31
Regular Service and Maintenance 32
Maintenance schedule 32
1
2
1.Before You Hit the Road
Welcome to your new Gogoro! Let us walk you through the right steps to operate your
Smartscooter® safely and maximize your riding experience. Please read this guide carefully
before you hit the road and make sure you meet all the following requirements:
●You already have a valid Motorcycle license.
●You know how to safely and correctly ride a motorcycle of the class you are
licensed to, and you are mentally and physically in proper condition.
●You fully understand how to correctly operate a Smartscooter®.
●You fully understand all the operational instructions, special notes and warnings
described in this manual.
If you have any questions concerning the operation or maintenance of your Smartscooter®,
please consult the Gogoro Service Center at 0800-365-996.
Have a safe and fun riding experience with Gogoro!
Safety Notice
Make the most of the superior performance of the Smartscooter® by following appropriate
handling and riding procedures. To protect yourself and others on the roads, please follow
the instructions listed below:
●Abstain from riding if you are under the influence of drugs or alcohol, or if you are
not in a good physical or mental condition.
●Observe traffic rules and pay attention to road and traffic conditions to avoid
dangerous situations proactively.
●Always wear protective gear that meets the legal requirements, such as a helmet,
and other protective gear such as gloves and boots when necessary.
●Perform basic inspections before every ride. Check headlights, brakes, tire tread
and tire pressure, as well as other potentially loose parts. Return to the Gogoro
designated service center if maintenance or repairs are necessary.
3
This manual highlights important information with the following symbols:
Note: descriptions that need additional attention.
Warning: extra care must be taken to avoid personal or vehicle damage.
Gogoro Service Center features: items which can only be adjusted, activated or
deactivated by the Gogoro service staff.
24-HOUR Roadside Assistance
The Gogoro Service Center offers round-the-clock roadside assistance. In case your
Smartscooter® is out of order or involved in an accident, please call toll-free at
0800-365-996 and the Gogoro Service Center will dispatch assistance vehicles to help you;
service charges may occur according to your location and distance of transportation.
Names and Functions of the Vehicle
Figure 1-1: Left View
4
Figure 1-2: Top View
Figure 1-3: Front View
Figure 1-4: Motor Mount
5
Figure 1-5: Left Handle Switches
High/low beam switch:
●Press to switch the headlight from low beam to high beam.
●Long press for 0.5 seconds and release, the headlight will flash alternating between
the low and high beam for 3 cycles, to warn the oncoming vehicles and passengers.
Left/Right turn signal switch:
6
●Press once - the left turn signal blinks and plays an acoustic note. Press again to
turn off.
Hazard warning light switch:
●Press on the switch makes both turn signals blink and play an acoustic note.
Horn button:
●Hold the horn button to activate the sound, release to stop.
Reverse ring:
●Under motor standby mode, turn it forward and the scooter will reverse slowly with
flashing and audible warning signs.
7
Note: The auto-off feature built into the turn signal lights will be activated when
the handle is turned back past a certain threshold.
Figure 1-6: Right Handle Switches
Trip Toggle Button:
●Short presses cycle through different information on the odometer display; the
information includes total mileage (ODO), single trip mileage (TRIP) and estimated
remaining mileage for the current charge (RANGE).
●With TRIP information on display, press the button for 3 seconds to reset.
●When TPMS is installed and Smartscooter® remains stationary, by short pressing
Trip Toggle Button 4 times in a row, the odometer will display F --,r --. By short
pressing Trip Toggle Button 4 times in a row when commencing riding
Smartscooter®, the actual tire pressure will be shown on the odometer, for example
: F 36, r 40.
Seat open:
●If the Smartscooter® is already unlocked, and motor is still off, press this button to
open the seat for accessing the storage compartment below. (Models with iQ
System® Smart Key)
S Button:
●Press the S Button to enter Super Boost Mode, another press switches back to
Normal Mode.
Regen button:
8
Note:
●The display returns to RANGE mode after being idle for 10 seconds if the
remaining battery power is under one bar.
●If the battery power is drained, the display stops at the RANGE mode and
the mileage is shown as “-----” without any number, and the button won’t
respond.
●If the motor is standing by, press this button will turn on/off regenerative braking
function. When regenerative braking is on, icon on the dashboard will be
on.
Smart Button:
●Press the button to activate the Smart Mode, another press deactivates the mode.
(Please refer to 3. Moving and Stopping)
Figure 1-7: Dashboard Information
9
Note: The system sets the intensity of regenerative braking based on the setting
in the Gogoro® App, but also takes the current speed and remaining battery level
into consideration, and makes minor adjustments accordingly.
Tabla de contenidos
Otros manuales de Scooter de Gogoro
