Go Rhino DOMINATOR SERIES Manual de programación

REV/B

QTY PARTS DESCRIPTION

12 3/8” X 2” HEX BOLTS

24 3/8” HEX NUTS

24 3/8” LOCK WASHERS

48 3/8” FLAT WASHERS

QTY

PARTS DESCRIPTION

3/8” X 1” HEX BOLTS

D02 FRONT AND REAR MOUNTING BRACKETS

D03 CENTER MOUNTING BRACKETS

D24097P PASSENGER SIDESTEP

D24097D DRIVER SIDESTEP

INSTALLATION INSTRUCTIONS

Read the instructions completely before you begin the installation.

If your vehicle is equipped with factory running boards, remove the boards, brackets and fasteners.

This installation uses (3) mounting brackets per side, and requires drilling (2) holes in the lower body

pinch mold for each bracket.

It is the installer’s responsibility to confirm all measurements and that there are no obstructions such as

brake, fuel or electrical lines before drilling.

Step 1. Beginning with the passenger side measure reward from the front fender bolt (refer to diagram for

dimensions) and scribe (6) vertical lines on the body pinch mold.

DOMINATOR SERIES SIDESTEPS

ASSEMBLY & INSTALLATION INSTRUCTIONS

PART NO. D24097 02-08 DODGE RAM QUAD CAB

Do not attempt to install this product on any vehicle other than the one it is designed for and listed a ove!

Step 2. Measure up from the bottom edge of the pinch mold 7/16” and scribe intersecting lines.

Step 3. Confirm the measurements, center punch and drill 3/8” holes through the body pinch mold.

Repeat the above steps for the driver side.

REAR OF VEHICLE

D02 MOUNTING BRACKETS

D03 MOUNTING BRACKET

D24097P PASSENGER SIDESTEP

FRONT FENDER BOLT

Step 4. Loosely attach the mounting brackets to the body pinch mold using the 3/8” x 2” hex bolts, flat

washers, lock washers and hex nuts as shown.

Step 5. Position the passenger sidestep up to the mounting brackets and loosely attach it to the brackets

using the 3/8” x 1” hex bolts, flat washers, lock washers and hex nuts.

Step 6. Align sidestep with the body and then tighten all mounting bracket and sidestep nuts and bolts.

Step 7. Repeat the above steps to install the driver side mounting brackets and sidestep.

Este manual sirve para los siguientes modelos

Otros manuales de Repuestos para automóviles de Go Rhino

Go Rhino

Go Rhino DOMINATOR II Series Manual de usuario

Go Rhino

Go Rhino DOMINATOR 2 SERIES Manual de programación

Go Rhino

Go Rhino Dominator 2 series Manual de usuario

Go Rhino

Go Rhino dominator d2 series Manual de usuario

Go Rhino

Go Rhino dominator 2 series Manual de usuario

Go Rhino

Go Rhino DOMINATOR 2 SERIES Manual de programación

Go Rhino

Go Rhino DOMINATOR II Series Manual de usuario

Go Rhino

Go Rhino DOMINATOR D2 SERIES Manual de usuario

Go Rhino

Go Rhino DOMINATOR II Series Manual de usuario

Manuales populares de Repuestos para automóviles de otras marcas

Hellwig

Hellwig 5812 Manual de usuario

Boomba Racing

Boomba Racing EVO X Manual de usuario

Xtracer

Xtracer 1152 Manual de usuario

Tuff Country

Tuff Country 32103 Manual de usuario

ADD

ADD 2003 – Current Chevy 1500/2500 ADD Lite Manual de usuario

ADD

ADD 2007-2014 Jeep JK venom Manual de usuario

Gibson

Gibson 69522 Manual de usuario

Airaid

Airaid 400-279 Manual de usuario

Poison Spyder

Poison Spyder JK BRAWLER ROCKERS Manual de servicio

ADD

ADD 2007-2013 GMC 1500 Manual de usuario

aFe Power

aFe Power 54-12208 Manual de usuario

USA Standard Gear

USA Standard Gear Spartan Locker Manual de usuario

Fabtech

Fabtech FTS26016BK Manual de usuario

Torklift

Torklift C2207/FMTPJ07LDCHSB Manual de usuario

Grammer

Grammer COMPACTO Comfort S Manual de usuario

RANCHO

RANCHO RS66505B Manual de usuario

Renault

Renault ESPACE 82 01 440 136 Manual de usuario

Chassisworks

Chassisworks gStreet 5817-F10-12 Manual de usuario