Glorystar EMT431 Manual de usuario

Android Advertising

Displayer

EMT431

User Manual

Please read this instruction before

Importation Safety Instructions

Read this user manual

All safety and operating instructions in this user manual should be read before operating the

product

Keep this user manual

This user manual should be retained for future references.

Head Warnings

Be cautious about warning signals on the product.

Follow Instructions

Please follow instructions in this user manual

Attachments

To avoid danger, please do not use attachments not recommended by the product

manufacturer.

Mounting

Do not place the product on any unstable cart, stand, tripod or table to avoid injury on

children and adult. Please only use attachments indicated by product manufacturer.

Temperature

Please use this product within operating temperature 32°F ~ 100°F (0°C ~ 45°C), relative

humidity 20%-80%. The product should be situated away from any heat source such as

radiators, heat registers, stoves or other products (including amplifier) to product heat.

Avoid Liquid Invasion

Avoid the invasion of any liquid. Avoid placing it near bathtub, sink, kitchen, wet basement or

swimming pool. Do not place product on any uneven surfaces and keep a distance of at least 6

inches from wall. Do not place heavy objects on top of the unit and at sealed areas to avoid

heat ventilation problems.

Product Protection

Please do not place any attachment or parts inside the product to avoid contacts with voltage

points that could result an electric shock or fire.

Heat Ventilation

There is no heat ventilation on the upper and lower part of the product, therefore to avoid

overheating, please do not block any ventilation openings with objects (e.g. carpet). Please

allow the opening to have 10cm distance for ventilation.

Grounding or Polarization

This product could be equipped with an alternate plug.

Power –Cord Protection

Power supply cords should be routed so that they are unlikely to be walked on or pitched by

items placed upon them. Pay attention to the connection of plugs.

Power Sources

This product should be operated only from the type of power source indicated on the rear

panel. If you are unsure of the type of power supply to your home, consult your product

purchaser or local power company.

Lighting and storms

Unplug the outlet during lighting, storms or long unused periods. This will prevent damages

and power-line surges to the product.

Overloading

Do not overload wall outlets, extension cords or integral convenience receptacles as this can

result in a risk of fire or electric shock.

Damage Handling

Unplug this product from the outlet of wall and request qualified service personnel under the

following conditions:

• when the power supply cord or plug is damaged

• when the picture display gets dimmer

• when liquid has been spilled or objects have fallen on to the product

• when the product has been exposed to rain or water.

• Adjust only those controls that are in the instruction manual. For improper adjustments may

result in damage and will often require extensive work by a qualified technician to restore

the product to its normal operation.

• When the product exhibits a distinct change in performance-this indicates a need for repair

service.

Replacement parts

When replacement parts are required, be sure that the technician uses replacement parts

specified by the manufacturer or parts with same features. Unauthorized substitution may

result in fire, electric shock or other hazards.

Safety Check

Upon completion of any service or repair to this product, ensure technician for proper

operating condition performs safety checks.

Warnings

If the battery of remote control is incorrectly replaced, there will be a danger of explosion.

Storage

Keep the product at dim areas, room temperature and low humidity to maintain original

condition. This will avoid danger.

Transportation

Since the product consists of glass and delicate electronic components, excessive shock or

drop will result damages. Please handle the product carefully to minimize shock during

transportation.

Recycling

The product utilizes tin-lead solder, and has a fluorescent lamp containing a small amount of

mercury. For environmental considerations, disposal of these materials may be regulated in

your community. For disposal or recycling information, please contact your local authorities,

or Electronics Industries Alliance: http://www.eiae.org/

Cleaning

Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol

cleaners. Use damp cloth for cleaning.

This device has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

device generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to

radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this device does cause harmful interference to radio or television

reception, which can be determined by turning the device off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the device and receiver.

--Connect the device into an outlet on a circuit different from that to which the

receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment

FCC Radiation Exposure Statement

The antennas used for this transmitter must be installed to provide a separation dista

nce of at least 20 cm from all persons and must

not be co-located for operating in conjunction with any other antenna or transmitter.

Spec. & Package

Package included:

-Please confirm all the items is included before the setup start.

Model EMT431

Sizes 43”

Resolution

(pixles)

1920x1080

Brightness 400 cd/m2

Aspect Ratio 9:16

CPU Quad-core ARM Cortex-A17 at 1.8 Ghz Processor with Mali-T764 GPU Processor

RAM 2 GB DDR3

Operating System Android

Hardware Support Control Buttons, Earphone, RJ45, Wi-Fi (802.11b/g/n), USB,HDMI

Speaker 10Wx2

Memory Support SD Card

ntroduction of Android

1. Start up and shut down

To start your device,put AC plug into AC jack to light up the screen. To shut down

your device,pull-out AC plug from AC jack.

2. The App Drawer – right top corner

Press the icon in the bottom middle of the screen to open the App Drawer. The

“Apps” tab displays all applications that are available on the tablet.

To place a app shortcut on the desktop, touch and hold the icon until the App Drawer

fades and the desktop appears. Move your finger to the location where you want to place

the icon and release your touch to place the icon.

When using apps or other parts of the operating system you often will see the “Extra

Options” icon.

Pressing this icon will open a secondary menu with more options. Functions like opening

an advanced setting menu, switching to a different account or refreshing the displayed

information are often “Hidden” behind this icon.

3. Navigation icons – bottom of the screen

On the bottom side you will find icons: Use the navigation icons “Home”

Or “Return” to close the App Drawer and return to your desktop. The “Recent

Activity” icon will show an interview of the active and recently opened

applications. Click on the small displayed preview to open that application.

General Operation

1. Installation of Applications

You can install your own Apps by opening the Apps shop. This button can be found in the

screen. Note that not all applications may function properly for your tablet. Some are made

especially for small screen devices such as phones.

You can also install your own Apps by opening the File Manager with SD card. You can find

the File Manager in the “App drawer＂too. And please follow the below steps:

1)Copy the APK file to your SD memory card and insert the card into your Jarvis.

2)Open the File Manager and click the SD card icon.

3)Open the APK and click on the install button.

4)It will show the installing blocked because it is not from Apps store｀Google Play’ and then

please accept the permission.

5)The application is now installed.

2. Administer/remove apps

The｀Apps＇item in the｀Setting＇menu will display an overview of the installed apps.

There are four tabs available which filter the displayed app list. Select an app to view its

detailed information.

In the detailed information you also have the options｀Force Stop＇,｀Uninstall＇, ｀Clear

data＇and｀Move to SD card＇. Moving apps to your SD card can save you some internal

storage memory on the tablet.

The｀Clear cache＇and｀Clear defaults＇can be used when you are experiencing issues with

a specific app. Clearing cached information and (possible wrong) default settings may solve

the problem. Clearing this information will also wipe any stored login information. i.e.

clearing the cache of your social media app will also force you to re-login afterwards. Apps

may also be removed in the apps content page of the market/ shop application.

3. Add an account

The best way to fully make use of your Android tablet is by linking your Google/Gmail

account to your device. Open the｀Settings＇menu and choose the｀Accounts & sync＇

item.

Without any added accounts the right pane will display nothing. Instead select the option｀

Add account＇in the top right corner. To add a Google/Gmail account please select｀Google

＇in the pop-up and follow the instructions on the screen. After entering your Google

username and password you have the option to automatically back-up your apps, setting (i.e.

bookmarks and Wifi passwords) and other data.

Tabla de contenidos

Otros manuales de Tableta de Glorystar

Glorystar

Glorystar NEB156-01 Manual de usuario

Glorystar

Glorystar TAURI101 Manual de usuario

Glorystar

Glorystar JAR185 Manual de usuario

Glorystar

Glorystar TAURI7 Guía de configuración

Glorystar

Glorystar JAR141 Manual de usuario

Glorystar

Glorystar JAR321 Manual de usuario

Glorystar

Glorystar ADD041 Manual de usuario

Glorystar

Glorystar JAR-23.8 Manual de usuario

Glorystar

Glorystar TAURI Manual de instrucciones

Glorystar

Glorystar TAURI Manual de usuario

Glorystar

Glorystar TAURI Manual de usuario

Glorystar

Glorystar TAURI Manual de instrucciones

Glorystar

Glorystar NEB215 Manual de usuario

Glorystar

Glorystar NEBULA Manual de usuario

Glorystar

Glorystar JAR 271 Manual de usuario

Glorystar

Glorystar TAURI Guía de configuración

Glorystar

Glorystar GSA001 Manual de usuario

Glorystar

Glorystar TAURI101 Manual de usuario

Glorystar

Glorystar Nebula Plus NEB101 Manual de usuario

Manuales populares de Tableta de otras marcas

Laser

Laser MID-1060 Guía del usuario

MUNBYN

MUNBYN IRT09J Guía de inicio rápido

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz Manual de usuario

Dell

Dell Latitude ST Manual del propietario

Lenovo

Lenovo IdeaTab S6000L Manual del propietario

Venturer

Venturer WT9L11 Manual de usuario

EDUGEAR

EDUGEAR UnoBook Manual de usuario

Philips

Philips PI3210G/58 Manual de usuario

ADLINK Technology

ADLINK Technology IMT-BT Manual de usuario

TwinMOS

TwinMOS TwinTAB-T102D1 Manual de usuario

Archos

Archos 9.7 xenon Manual de usuario

Getac

Getac E100 Manual de usuario

HANNspree

HANNspree HANNspad SN70T3 Manual de usuario

Philips

Philips PI3105W2/55 Manual de usuario

LG LG-V935 Manual de usuario

Zeki

Zeki TBDB763B Manual de usuario

Ricoh

Ricoh eQuill Manual de usuario

DT Research

DT Research DT365CT Instrucciones de montaje