Globalmediapro HDVS IP Series Manual de usuario
TFT LCD MONITOR
USER MANUAL
HDVS IP Series
LCD_12.1”/15.6”
LCD_21.5”/24”/27”
LCD_32”/42”/46”
V 1.5
2
1. Warning.........................................................................................................3
2. Safety Precautions........................................................................................4
3. LCD Monitor Mounting guide........................................................................6
4. Monitor Controls .....................................................................................8
5. Connections.................................................................................................10
6. LCD OSD Function......................................................................................12
7. PC Timing..................................................................................................13
8. Features.......................................................................................................13
9. Specification................................................................................................14
10. Appendixes ... Troubleshooting for Display problem…………….…..….17
11. IP Camera Device Side Setting …………………………………………….18
12. HDVS IP Host Side Operation..................................................................19
13. HDVS IP Display Setting ……..................................................................21
14. HDVS IP Network Setting .........................................................................21
15. NTP Setting .............................................................................................22
16. Connect With IP Camera ……………………………….….…….………….22
17. Drag to Change Channel Sequence …………………..….…….………….24
18. Digital Zooming ………………………………….……………..…………….24
19. System Device Setting ............................................................................25
20. Channel Information …………………….…………………….….………….26
21. Recording ……….....................................................................................27
22. System HDD/e_SATA Setting ………………………….……..……………29
23. Troubleshooting for IP Camera Problem …..……………..…………….30
3
1. WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.
CAUTION:
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated “dangerous voltage” within the product=s
enclosure that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the product.
Precautions
Safety--------------------------------------- Installation---------------------------------------
Should any liquid or solid object fall into the
cabinet, unplug the unit and have it checked
by the qualified personnel before operating it
any further.
Unplug the unit from the wall outlet if it is not
going to be used for several days or more.
To disconnect the cord, pull it out by the plug.
Never pull the cord itself.
Allow adequate air circulation to prevent
internal heat built-up. Do not place the unit on
surfaces(rugs, blankets, etc.) or near materials
(curtains, draperies) that may block the
ventilation holes.
Do not install the unit in an extremely hot or
humid place or in a place subject to excessive
dust or mechanical vibration.
The unit is not designed to be waterproof.
Exposure to rain or water may damage the unit.
Cleaning------------------------------------
Clean the unit with a slightly damp soft cloth.
Use a mild household detergent. Never use strong
solvents such as thinner or benzene as they might
damage the finish of the unit.
Retain the original carton and packing materials
for safe transport of this unit in the future.
4
2.Safety Precautions
Federal Communications Commission (FCC) Statement
This Equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
●You are cautioned that changes or modifications not expressly approved
by that party responsible for compliance could void your authority to
operate the equipment.
This device complies with Part 15 FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received including interference
that may cause undesired
5
About this user manual
This manual aims at assisting the user on how to operate the monitors described in this
manual.
This manual is subject to rigid quality control. However, no guarantee can be given that
mistakes are not present. We reserve the right to make changes to the manual without prior
notice.
Before operating the appliance, please read this manual carefully and retain it for further
reference. Verify that all appliance items are included in the delivery. Should items be
missing, do not operate the appliance and contact your local dealer.
Never attempt to repair the appliance yourself. This should only be done by qualified service
personnel.
Improper handling of the appliance will invalidate the warranty.
Package List
A. LCD IP Monitor x 1
B. Power Cord x 1
C. User Manual x 1
D. 12V Power Adapter x 1 [Except for the 32”/42”/46”]
E. USB Mouse x 1
6
3.LCD Monitor Mounting Guide
A. Desktop
Adjust the viewing angle of LCD to fit most comfortable monitoring status.
B. Wall mount
Free your space with wall mount design.
Please follow the fix-hole size in back panel to install the LCD to the wall.
12.1”/15.6”/21.5”/24”/27”
C. VESA Bracket
12.1”/15.6”/21.5”/24”/27”
7
VESA Bracket: 32”
VESA Bracket: 42”/46”
8
4.Monitor Controls
12.1”/15.6”/21.5”/24”/27”/32”/42”/46”Aluminum
32”/42”/46”Aluminum
9
Key Board
1. Power
Push to turn on and turn off the unit.
LED Green light: Power on
LED Red light: Standby mode.
2. / 3. Adjust UP /DOWN
UP: Used as UP function. Or Increase value on the OSD Menu.
And as a hot key for color adjust function.
DOWN: Used as DOWN function. Or Decrease value on the OSD Menu.
And as a hot key for auto adjust function.
4. Item:
Hot key for OSD adjustments of Volume , Contrast, Brightness,
, and Red, Green, Blue.
5. Menu
Push to call out OSD menu. Or Used
as
Confirm function in OSD Menu.
6. Source
Select input signal from D-SUB, HD,DVI ,and IP.
KEY Lock Function:
Push “Menu” and “Item” , OSD of screen will show “Key Lock on”, Into key lock mode.
And push again , OSD of screen will show “Key Lock off “, Into key unlock mode.
10
5.Connections: HDVS IP Series
12.1”/15.6”/21.5”/24”/27”
2 3 4 5 6 7 8 9
1: e-SATA
2: RJ-45 (Ethernet Interface)
3: USB IN *2 (USB Mouse/Record Backup Connector)
4: DC 12V IN
5: DVI IN
6: Full HD IN
7: VGA IN
8: AUDIO R/L IN
9: Earphone OUT
Este manual sirve para los siguientes modelos
16
Tabla de contenidos
Otros manuales de Monitor de Globalmediapro
