Global WF 9221-76 Manual de usuario

GLOBAL

WF 9221-76

Instruction manual

Technical Data

Machine subclass: Global WF 9221-76 Global WF 9221-2-76

Needle system : DY x 23 DY x 23

Needle size (standard) : 230 230

Max. PFL lift : 20mm 20mm

Max. stitch length : 10mm 10mm

Standard needle gauge : X 18mm

Needle gauge available : X 8 / 9,5 / 12,7 / 15,9 /

25,4 / 44,5mm

Working space : 760mm 760mm

Back Tack (standard) : Pneumatic Pneumatic

Presserfootlifter (standard) : Pneumatic Pneumatic

Adjusting the stitch length

-Push and hold button shown on picture, turn handwheel until you feel button lock-in.

-Hold in the button, turning the hand wheel away from you will make the stitch length

longer and turning the hand wheel towards you will make the stitch length shorter

(see below).

Adjusting the rocker

-With the stitch length being set for 0 with the needle at the lowest position, the

feeding foot bar should be distanced 14,5mm from the presser foot bar (see picture

below).

Feed dog height

-Being in its topmost position, the feed dog should exceed the throat plate by 1 tooth

height.

-For checking, set the stitch regulator for 0 stitch length and turn the handwheel.

Lifting movement of the feed dog

-The ascending feed dog and the descending needle should reach the throat plate level

simultaneously (see picture below).

-The feed dog is at its topmost point when the needle is at its lower dead point (see

picture below).

-For checking, set the stitch regulator for 0 stitch length and turn the handwheel.

Feed lift motion

-Loosen the two Allen keys, turn the shaft to adjust the height of the feed lift motion

(see picture below).

Hook timing

-Set the stitch length on 0. Turn the needle to the lowest position and continue to turn

until the needle bar rises 3,5 – 4mm at this position the hook point must be half way

across the width of the needle (see picture below).

Needle bar height

-Set the machine on the longest stitch. The hook must be 2mm above the eye of the

needle (see picture above).

Distance between the hook and the needle

-The distance between the hook point and the needle should amount to 0,1mm. This is

adjusted by unscrewing the two screws highlighted below in red and by moving the

hook saddle left of right (see picture below).

-In case of a needle size change, check the distance and adjust accordingly.

-After re-setting, re-check hook timing.

Bobbin case opener

-The bobbin case is opened by the finger at the moment of thread passage.

-The finger travel and the lifting moment are not adjustable.

-Bobbin case opening finger – max opening 2 – 2,5mm (see picture below).

Feeding foot and presser foot

Equal stroke of feeding foot and presser foot

-Boot feet should have the same stroke.

-Adjust 0 stitch length, turn the machine and compare the strokes.

-For correcting:

1. lift slightly the foot with the higher stroke off the throat plate.

2. Loosen the block with the screw of the shaft (see picture below).

The lifted foot will be lowered by the presser foot spring down to the throat plate.

3. Repeat the adjustment until the strokes are equal.

Otros manuales de Máquina de coser de Global

Global

Global WF 1505 Manual de lista de piezas

Global

Global LP 8971-I-NP-AUT Manual de usuario

Global

Global ZZ 2560 Series Manual de usuario

Global

Global 350 AUT SERIES Manual de lista de piezas

Global

Global WF 955 Manual de lista de piezas

Global

Global 3700 AUT Series Manual de lista de piezas

Global

Global ZZ 1366-3S-76-P Manual de lista de piezas

Global

Global 390 D Manual de usuario

Global

Global WF-925 Manual de usuario

Global

Global SK 111 Manual de usuario

Global

Global WF3955DD Series Manual de usuario

Global

Global WF 955-AUT Manual de lista de piezas

Global

Global WF3955DD Series Guía del producto

Global

Global WF 9205 Guía

Global

Global LP 19710745 Series Guía de solución de problemas

Global

Global WF 9995-H Manual de lista de piezas

Global

Global SM 7774 Manual de instrucciones

Global

Global BM-9280 Manual de usuario

Global

Global BM 345 Manual de usuario

Global

Global WF 975-LH Manual de lista de piezas

Global

Global LP 2881 Series Manual de usuario

Global

Global 303 D Manual de usuario

Global

Global WF 955 AUT Manual de lista de piezas

Global

Global WF 926-SNB Manual de lista de piezas

Manuales populares de Máquina de coser de otras marcas

Riccar

Riccar RL634DE Manual de usuario

Singer

Singer 2517 Manual de usuario

Pfaff

Pfaff 3307-1 SERIES Manual de usuario

Janome

Janome Quilt Maker Pro 18 VERSA Manual de usuario

Siruba

Siruba C007JP Manual de usuario

Husqvarna Viking

Husqvarna Viking Designer SE Manual de usuario

Singer

Singer 148-5 Manual de usuario

IKEA

IKEA SY Manual de usuario

Pfaff

Pfaff 571 Manual de usuario

Singer

Singer 15-91 Manual de usuario

Brother

Brother BB370 Manual de usuario

Pegasus

Pegasus WT100 Series Manual de usuario

Reliable

Reliable 7100DB Manual de usuario

Pfaff

Pfaff 937 Manual de usuario

Singer

Singer 6038 Manual de usuario

Singer

Singer 413K Manual de usuario

Pfaff

Pfaff 1471 E1 Manual de usuario

Kenmore

Kenmore 16677 - Serger Sewing Machine Manual de usuario