Global Test Supply SFG-205 Manual de usuario

10 MHz Arbitrary/ Function

Waveform GeneratorVUser

M a n u a l

SFG-2;

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Safety Summary

The following safety precautions apply to both operating and maintenance personnel

and must be observed during all phases of operation, service, and repair of this

instrument. Before applying power, follow the installation instructions and become

familiar with the operating instructions for this instrument.

If this device is damaged or something is missing, contact the place of purchase

immediately.

This manual contains information and warnings that must be followed to ensure safe

operation as well as maintain the meter in a safe condition.

GROUND THE INSTRUMENT

To minimize shock hazard, the instrument chassis and cabinet must be connected

to an electrical ground. This instrument is grounded through the ground conductor of

the supplied, three-conductor ac power cable. The power cable must be plugged into

an approved three-conductor electrical outlet. Do not alter the ground connection.

Without the protective ground connection, all accessible conductive parts (including

control knobs) can render an electric shock. The power jack and mating plug of the

power cable must meet IEC safety standards.

DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE

'RQRWRSHUDWHWKHLQVWUXPHQWLQWKHSUHVHQFHRIÀDPPDEOHJDVHVRUIXPHV

2SHUDWLRQRIDQ\HOHFWULFDOLQVWUXPHQWLQVXFKDQHQYLURQPHQWFRQVWLWXWHVDGH¿QLWH

safety hazard.

KEEP AWAY FROM LIVE CIRCUITS

Instrument covers must not be removed by operating personnel. Component

UHSODFHPHQWDQGLQWHUQDODGMXVWPHQWVPXVWEHPDGHE\TXDOL¿HGPDLQWHQDQFH

personnel. Disconnect the power cord before removing the instrument covers and

replacing components. Under certain conditions, even with the power cable removed,

dangerous voltages may exist. To avoid injuries, always disconnect power and

discharge circuits before touching them.

DO NOT SERVICE OR ADJUST ALONE

Do not attempt any internal service or adjustment unless another person, capable of

UHQGHULQJ¿UVWDLGDQGUHVXVFLWDWLRQLVSUHVHQW

DO NOT SUBSTITUTE PARTS OR MODIFY THE INSTRUMENT

'RQRWLQVWDOOVXEVWLWXWHSDUWVRUSHUIRUPDQ\XQDXWKRUL]HGPRGL¿FDWLRQVWRWKLV

instrument. Return the instrument to B&K Precision for service and repair to ensure

that safety features are maintained.

WARNINGS AND CAUTIONS

WARNING and CAUTION statements, such as the following examples, denote a

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

hazard and appear throughout this manual. Follow all instructions contained in these

statements.

A WARNING statement calls attention to an operating procedure, practice, or

condition, which, if not followed correctly, could result in injury or death to personnel.

A CAUTION statement calls attention to an operating procedure, practice, or condition,

which, if not followed correctly, could result in damage to or destruction of part or all of

the product.

WARNING:

Do not alter the ground connection. Without the protective ground connection, all

accessible conductive parts (including control knobs) can render an electric shock.

The power jack and mating plug of the power cable meet IEC safety standards.

WARNING:

To avoid electrical shock hazard, disconnect power cord before removing covers.

5HIHUVHUYLFLQJWRTXDOL¿HGSHUVRQQHO

CAUTION:

Before connecting the line cord to the AC mains, check the rear panel AC line voltage

indicator. Applying a line voltage other than the indicated voltage can destroy the AC

OLQHIXVHV)RUFRQWLQXHG¿UHSURWHFWLRQUHSODFHIXVHVRQO\ZLWKWKRVHRIWKHVSHFL¿HG

voltage and current ratings.

CAUTION:

This product uses components which can be damaged by electro-static discharge

(ESD). To avoid damage, be sure to follow proper procedures for handling, storing

and transporting parts and subassemblies which contain ESD-sensitive components.

Compliance Statements

Disposal of Old Electrical & Electronic Equipment

(Applicable in the European Union and other European

countries with separate collection systems). This product

is subject to Directive 2002/96/EC of the European

Parliament and the Council of the European Union on

waste electrical and electronic equipment (WEEE) ,

and in jurisdictions adopting that Directive, is marked

as being put on the market after August 13, 2005, and

should not be disposed of as unsorted municipal waste.

Please utilize your local WEEE collection facilities in

the disposition of this product and otherwise observe all

applicable requirements.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

CE Declaration of Conformity

The power supply meets the requirements of 2006/95/EC Low Voltage Directive and

2004/108/EC Electromagnetic Compatibility Directive with the following standards.

Low Voltage Directive

zEN61010-1: 2001

zEN61010-031: 2002+A1: 2008

EMC Directive

zEN 61326-1:2006

zEN 61000-3-2: 2006+A2: 2009

zEN 61000-3-3: 2008

Safety Symbols

Refer to the user manual for warning information to avoid hazard or

personal injury and prevent damage to instrument.

Chassis (earth ground) symbol.

On (Power). This is the In position of the power switch when

instrument is ON.

Off (Power). This is the Out position of the power switch when

instrument is OFF.

Off (Supply). This is the AC mains connect/disconnect switch on the

back of the instrument.

CAUTION CAUTION indicates a hazardous situation which, if not avoided, will

result in minor or moderate injury

WARNING WARNING indicates a hazardous situation which, if not avoided,

could result in death or serious injury

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Introduction of SFG-20X Series

ThemanualcoversthefollowingtwotypesofSFG-20XSeriesFunction/Arbitrary

Waveform Generators: SFG-210 and SFG-205.

SFG-20X Series Function/Arbitrary Waveform Generators adopt the direct

digital synthesis (DDS) technology, which can provide stable, high-precision,

pure and low distortion signals. Its combination of excellent system features,

easinessinusageandversatilefunctionsmakesthisgeneratoraperfectsolution

for your job now and in the future.

SFG-20XSeriesFunction/ArbitraryWaveformGeneratorhasaclearandsimple

front-panel. The user-friendly panel layout and instructions, versatile terminals,

direct graph interface, built-in instructions and help system have greatly

simplified the operation process, with the help of which, users do not have to

spend a great deal of time learning and familiarizing the operation of the

generator before they can use it proficiently. The built-in AM, DSB-AM,FM, PM,

ASK, FSK and PWM modulation functions generate modulated waveforms at

ease, without the help of a separate modulating source. USB I/O is a standard

accessory, while GPIB is optional. Remote instructions meet the SCPI

specification requirements.

Fromthecharacteristicsandspecificationsgivenbelow,youwillunderstandhow

SFG-20X can satisfy your requirements.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

DDS technology provides precise, stable and low distortional output

signal.

3.5’TFT color LCD display.

125MSa/s sampling rate, 14-bit resolution.

Frequency characteristics:

Sine: 1μHz to 30MHz

Square: 1μHz to 10 MHz

Ramp: 1μHz to 300kHz

Pulse: 500μHz to 5MHz

White Noise: 10MHz bandwidth (-3dB)

Arbitrary: 1μHz to 5MHz

5 standard waveforms: Sine, Square, Ramp, Pulse, Noise

Self-defined arbitrary waveform

Multiple modulation function: AM, FM, PM, ASK, FSK, PWM, DSB-AM,

Sweep and Burst.

Multiple interfaces: USB host & USB device(USBTMC)

Support USB storage device. Software updating could also be

performed using USB devices.

Upto16ksamplepointsofinternalwaveformdepth,whichcanrebuild

or simulate any complex waveform.

Built-in help system.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Catalogue

General Safety Summary.................................................................................II

Introduction of SFG-20X Series ......................................................................VI

1. Getting Started...........................................................................................1

1.1. General Inspection ...........................................................................2

1.2. Handle Adjustment...........................................................................2

1.3. The Front/Rear Panel.......................................................................3

1.4. To Set a Waveform...........................................................................7

1.5. To Set Modulate/Sweep/Burst........................................................12

1.6. To Set Output.................................................................................14

1.7. To Use Digital Input........................................................................15

1.8. To Use Store/Utility/Help Function .................................................16

2. Operating Your Generator .......................................................................17

2.1. To Set Sine Signals........................................................................18

2.2. To Set Square Signals....................................................................23

2.3. To Set Ramp Signals......................................................................26

2.4. To Set Pulse Signals......................................................................29

2.5. To Set Noise Signals......................................................................33

2.6. To Set Arbitrary Signals..................................................................35

2.7. To Generate the Modulated Waveform..........................................42

2.8. To Generate Sweep .......................................................................52

2.9. To Generate Burst..........................................................................54

2.10. To Store and Recall.....................................................................58

2.11. To Set the Utility Function ...........................................................64

2.12. Test/Cal.......................................................................................75

2.13. Edition Information ......................................................................80

2.14. Updating Firmware......................................................................82

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

2.15. How to Use the Built-in Help System ..........................................83

3. Application and Examples........................................................................84

3.1. Example 1:Generate a Sine Wave.................................................85

3.2. Example 2:Generate a Square Wave.............................................87

3.3. Example 3:Generate a Ramp Wave...............................................89

3.4. Example 4:Generate a Pulse Wave ...............................................91

3.5. Example 5:Generate a Noise Wave...............................................93

3.6. Example 6:Generate an Arbitrary Wave.........................................94

3.7. Example 7:Generate a Sweep Linear Wave ..................................96

3.8. Example 8:Generate a Burst Wave................................................98

3.9. Example 9:Generate an AM Wave...............................................100

3.10. Example 10:Generate a FM Wave............................................102

3.11. Example 11:Generate a PM Wave............................................104

3.12. Example 12:Generate a FSK Wave ..........................................106

3.13. Example 13:Generate an ASK Wave........................................108

3.14. Example 14: Generate a PWM Wave .......................................110

3.15. Example 15: Generate a DSB-AM Wave ..................................112

4. Troubleshooting .....................................................................................114

General Inspecting....................................................................................114

Troubleshooting........................................................................................115

5. Service and Support ..............................................................................116

Maintain summary ....................................................................................116

Contact GLOBAL SPECIALTIES..............................................................117

6. Appendix................................................................................................117

Appendix A: Accessories..........................................................................117

Appendix B: Daily Maintain and Cleaning.................................................118

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

1. Getting Started

This chapter covers the following topics:

General Inspection

Handle Adjustment

The Front/Rear Panel

To Set a Waveform

To Set Modulate/Sweep/Burst

To Set Output

To Use Digital Input

To Use Store/Utility/Help Function

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

1.1. General Inspection

WhenyougetanewSFG-20XSeriesFunction/ArbitraryWaveform Generator,

you are suggested to take the following steps to inspect the instrument.

1. Inspect the shipping container for damage.

If there are damages in the packing or foam, keep them until the whole

machine and the accessories pass the electric and mechanical testing.

2. Check the accessories.

Accessories supplied with the instrument are listed in chapter 6 ‘Appendix

A: Accessories’.

If the contents are incomplete or damaged, please notify your sales

representative.

3. Inspect the instrument.

In case any mechanical damage or defect, or if the instrument does not

operate properly or pass performance tests, notify your sales

representative. If the shipping container is damaged, or the cushioning

materialsshowsignsofstress,notifythecarrieraswellasyoursalesoffice.

Keeptheshippingmaterialsforthecarrier’sinspection.Officeswillarrange

forrepairorreplacementattheiroptionwithoutwaitingforclaimsettlement.

1.2. Handle Adjustment

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Tabla de contenidos

Otros manuales de Generador portátil de Global Test Supply

Global Test Supply

Global Test Supply SFG-20X Manual de usuario

Manuales populares de Generador portátil de otras marcas

Kohler

Kohler 20EORZ Manual de instrucciones

Powerhorse

Powerhorse 83171 Manual de usuario

HURST

HURST ML-630-SI Manual de usuario

ETQ

ETQ TG4000 Manual de usuario

Briggs & Stratton

Briggs & Stratton 40265 Guía de configuración

ConMed

ConMed 7550 Manual de usuario

Owon

Owon Waveform Generator Manual de usuario

evertz

evertz 7700 Series Manual de usuario

Power Stroke

Power Stroke PS906025 Manual de usuario

Firefly

Firefly Cygnus CYG2400/460/24 Manual de usuario

Draper

Draper PG950S Actualización de firmware

PowerBoss

PowerBoss PowerBoss Manual de usuario

SDMO

SDMO SH 4000 Manual de usuario

EINHELL

EINHELL STE 5500 Manual de usuario

Wanco

Wanco WI3000P Manual de usuario

Full Boar

Full Boar FBT-3300 Manual de usuario

Dwyer Instruments

Dwyer Instruments ASG Manual de usuario

Westinghouse

Westinghouse WH1000i Series Manual de usuario