Combination Sander
2
SAFETY INSTRUCTIONSSAFETY INSTRUCTIONS
1. Keep your work area clean and well lit. Always keep the work area free of obstructions, grease,
oil, trash, and other debris.
2. Never operate this machine in the presence of ammable liquids, gases, or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep bystanders, children, and visitors away while operating this machine. Distractions can lead
to serious injury or property damage. Protect others in the work area from debris such as chips
and sparks. Provide barriers or shields as needed.
4. Never leave sander unattended while running.
5. Do not touch grounded surfaces such as pipes, radiators, ranges, and refrigerators when
operating on electrical components. There is an increased risk of electric shock if your body is
grounded.
6. Do not expose the machine to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
7. Grounded tools must be plugged into an outlet properly installed and grounded in accordance
with all local codes and ordinances. Never remove the grounding prong or modify the plug in
any way. Do not use adapter plugs. Check with a qualied electrician if you are unsure if the
outlet is properly grounded. If the tools should electrically malfunction, grounding provides a
low resistance path to carry electricity away from the user.
8. Do not use sander if power switch does not work. Cease operation and repair switch or replace
sander
9. Keep the Power Cord away from heat, oil, sharp edges, or moving parts. Cease operation and
replace Power Cords immediately if damaged.
10. Disconnect power cord before making any adjusments, maintenance, or storing the machine.
11. If you are using the sander outdoors, use an outdoor extension cord.
12. Avoid Accidental start-ups, make sure power switch is in "OFF" position before plugging in the
power cord.
13. Never use this machine when tired or under the inuence of drugs, alcohol, or medication.
14. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing,
and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving
parts and may cause serious personal injury.
15. Remove adjusting keys or wrenches before turning the sander on. A wrench or a key that is left
attached to a rotating part of the machine is dangerous may result in personal injury.
16. Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat,
or hearing protection should be used in certain conditions depending on workpiece and work
environment.
17. Check for misalignment or binding of moving parts, breakages, and any other conditions that
may impede operation of the sander. Do not operate the sander if damages, have the machine
serviced before next use.
18. Do not use third party or aftermarket accessories, they may impare operation of the sander or
malfunction during normal use.
19. Maintain all labels and nameplates on the machine so that they are clearly visible and legible
