Glide Gear DST 50 Manual de usuario
DST 50
USER MANUAL
What’s included?
Telescopic Arm (C)
Main Telescopic Pole (A)
Table Clamp (B)
Locking Screw (D)
Main Hinge (E)
Camera Plaorm (F)
For more informaon please visit our website: www.glidegear.net
Assembly
Table/Desk conguraon:
The DST 50 can be mounted into 2 dierent conguraons:
• Mount onto a C-Stand. The DST 50 does not come with a C-Stand.
• Mount onto a table/desk using the supplied Table Clamp (B)
1
• Mount the Table Clamp (B) to the table or desk you would like to use by
ghtening the screw at the boom of the clamp as shown in Fig.1 .
• Slide the Main Telescopic Pole (A) onto the peg on top of the
Table Clamp (B).
• Using the Locking Screw (D), secure the Main Telescopic Pole (A) to the
peg as in shown in Fig. 2.
Fig.1
Fig.2
For more informaon please visit our website: www.glidegear.net
Assembly, Cont’d
C-Stand conguraon:
• Slide the Main Telescopic Pole (A) onto your C-Stand as in Fig. 3.
• Using the Locking Screw (D), secure the Main Telescopic Pole (A) to
the C-Stand.
2Adjust the height of the Main Telescopic (A) by loosening and
ghtening the pole clamp connecng the 2 telescopic poles
as shown in Fig. 4.
Fig.3
Fig.4
For more informaon please visit our website: www.glidegear.net
Assembly, Cont’d
3
4
Connect the Telescopic Arm (C) via the Main Hinge (E) as in
shown in Fig. 4.
Fig.4
Adjust the length of the Telescopic Arm (C) by loosening
and ghtening the clamp connecng the poles (Fig. 5).
Adjust the angle of the Telescopic Arm (C) by loosening and
ghtening the Main Hinge (E) .
Make sure the Main Hinge (E) is fully locked before moving
to the next step.
Fig.5
5
Adjust the angle of the Camera Plaorm (F) by loosening
and ghtening the hinge connecng the Camera Plaorm
(C) to the Telescopic Arm (C). See Fig. 5.
6
Make sure all the joints are fully locked into posion.
Mount your camera to the Camera Plaorm (F).
7
For more informaon please visit our website: www.glidegear.net
Adjustments
Once assembled, your setup should look like below:
Vercal Adjustment:
Loosen and ghten the pole clamp
to adjust the height of the DST 50
Arm Length Adjustment:
Loosen and ghten the pole clamps to adjust the length of the telescopic arm
Camera Adjustment:
Adjust the camera angle by loosening and ghtening
the hinge at the base of the Camera Plaorm
Arm Angle:
Adjust the arm angle by loos-
ening and ghtening the
hinge connect the arm to the
main pole
For more informaon please visit our website: www.glidegear.net
Tabla de contenidos
Otros manuales de Accesorios para cámaras de Glide Gear
Glide Gear
Glide Gear REVO 50 Manual de usuario
Glide Gear
Glide Gear SYL-1000 Platinum Manual de instrucciones
Glide Gear
Glide Gear G2G Vest Manual de usuario
Glide Gear
Glide Gear JB4 Quick-Jib Manual de instrucciones
Glide Gear
Glide Gear Dev Dolly Pro Manual de usuario
Glide Gear
Glide Gear DEV-1000 Manual de usuario
Glide Gear
Glide Gear LEIOS SMOOTH-C Manual de usuario
Glide Gear
Glide Gear OH 200 Manual de usuario
Glide Gear
Glide Gear TMP 500 Manual de usuario
Glide Gear
Glide Gear AXJ-100 Manual de instalación y operación
