GIULIANO PRESS ARM Manual de usuario

Instructions for

mounting/removing

tyres with HELP and

PRESS ARM

ed. 11/2005 cod. 3015761

Preliminary remarks: HELP and PRESS ARM are accessories fit to be installed on

S222 – S225 – S224 – S231 – (S232).

PRESS ARM only can be installed on S112F.

Their combined use is essential with “zero pressure” tyres.

The use of PRESS ARM is essential on low-profile tyres (from /45 to /30).

They are recommended on any kind of tyres.

Between the two devices, the PRESS ARM is the more versatile one.

Ty re

REMOVAL

Set the wheel on turntable, pressing tyre from over the jaws, and

lock the rim paying attention it doesn’t slip out of the jaws (this

operation might turn out difficult or even impossible).

Use the PRESS ARM to push the wheel downward so making its

clamping easier.

Correct clamping

Manual procedure

Assisted procedure

In case the rim to be removed has an “overturned” groove, use the

accessory shown above (WHEEL PRESSING CONE, part no.

9214251) to keep the tyre pushed on the jaws, so locking the rim.

In case the tyre bead slips back again into its seat, manually help

the tool positioning, acting a bit on the hexagonal arm (the

operation might turn out difficult or even impossible)

Manual procedure

Assisted procedure

HELP roller (if available) can be used for pushing the tyre in a way

to correctly set the tool on the rim without any effort.

PRESS ARM press pad can be used for pushing the tyre in a way

to correctly set the tool on the rim without any effort.

Assisted procedure

Use the PRESS ARM press pad to keep the tyre pushed while

inserting the lever between tyre and tool.

Push the tyre downwards, by hand, to let the bead lifting lever enter

the gap between tyre and tool (this operation might turn out difficult

or even impossible).

Manual procedure

Assisted procedure

Use the HELP roller (if available) to

push the tyre in a way to correctly

set the bead lifting lever between

tyre and tool.

To remove first bead from rim it is necessary

to push it downwards, at tool opposite side,

to position it at the rim groove level (this

operation might turn out difficult or even

impossible).

Manual procedure

Assisted procedure

Use the PRESS ARM disk to lift the tyre lower part from left side,

help yourselves by hand to also lift it from right side, in a way to

facilitate the insertion of the lever and complete detachment

operation.

Use the PRESS ARM press pad to push the tyre in a

way to bring the bead (tool opposite side) into the rim

groove and to make its detachment easier.

Manual procedure

Assisted procedure

If both devices are installed, use both disks to lift the tyre from both

right and left side.

If HELP is available, use its roller to lift the lower bead over tyre

edge to allow removal operation without lever.

The removed tyre

Assisted procedure

Use the HELP press pad (if available) to push the tyre in a way to

grease the rim inner side so facilitating the detachment.

Este manual sirve para los siguientes modelos

Otros manuales de Cambiador de neumáticos de GIULIANO

GIULIANO

GIULIANO S 560 Instrucciones de operación

GIULIANO

GIULIANO G1 SPORT Manual de usuario

GIULIANO

GIULIANO S 551 XL A Instrucciones de operación

GIULIANO

GIULIANO S 226 Manual de instrucciones

GIULIANO

GIULIANO S 557 Instrucciones de operación

GIULIANO

GIULIANO Crossage Guía del usuario

GIULIANO

GIULIANO S 551 XL A Instrucciones de operación

GIULIANO

GIULIANO S224 Documento técnico

GIULIANO

GIULIANO S 561 Instrucciones de operación

GIULIANO

GIULIANO S 554 Instrucciones de operación

Manuales populares de Cambiador de neumáticos de otras marcas

MW TOOLS

MW TOOLS BT200 Manual de usuario

Hunter

Hunter Maverick Series Manual de usuario

Corghi

Corghi BR2-C1E Manual de usuario

Snap-On

Snap-On EEWH311B Manual de usuario

TMG

TMG LC889NV Manual de usuario

JMP

JMP Fix Moto Diagrama de cableado

Corghi

Corghi A 9222 HP TI Manual de usuario

foc.us

foc.us F640 Manual de usuario

Corghi

Corghi Artiglio Master 26 MI Manual de usuario

SICE

SICE S 52A Manual de usuario

Sealey

Sealey TC968.V2 Manual de usuario

Coats

Coats 80C Manual de usuario

HENNESSY INDUSTRIES

HENNESSY INDUSTRIES Coats Rim Clamp X-Model Series Manual de usuario

Draper

Draper 78612 Manual de usuario

Aston Global

Aston Global ATC-5800 Guía

HENNESSY INDUSTRIES

HENNESSY INDUSTRIES Coats CHD-4730-4730W Manual

Butler

Butler NAV11N Manual de usuario

Ranger

Ranger R76LT Manual de usuario