Gigabyte GV-N62256DP2-RH Manual de usuario
GV-N62256DP2-RH
GeForce™6200 Graphics Accelerator
User's Manual
Rev. 101
12MD-N622P2R-101R
* The WEEE marking on the product indicates this product must not be disposed of with user's other household waste
and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!!
* The WEEE marking applies only in European Union's member states.
Copyright
© 2007 GIGABYTE TECHNOLOGY CO., LTD
Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in any from
without the expressed, written permission of GBT.
Trademarks
Third-party brands and names are the property of their respective owners.
Notice
Please do not remove any labels on VGA card, this may void the warranty of this VGA card
Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.
The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a
commitment to update the information contained herein.
Macrovision corporation product notice:
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited.
GV-N62256DP2-RH Graphics Accelerator - 2 -
English
Table of Contents
1. Introduction ......................................................................................... 3
1.1. Features ..................................................................................................... 3
1.2. Minimum System Requirement ..................................................................... 3
2. Hardware Installation ........................................................................... 4
2.1. Board Layout .............................................................................................. 4
2.2. Hardware Installation ................................................................................... 6
3. Software Installation ............................................................................ 8
3.1. Windows®XP Driver and Utilities Installation ................................................. 8
3.1.1. Operating System Requirement ................................................................................... 8
3.1.2. DirectX Installation .......................................................................................................... 9
3.1.3. Driver Installation ........................................................................................................... 11
3.1.4. Utilities on Driver CD ................................................................................................... 13
3.1.5. Taskbar Icon ................................................................................................................. 15
3.1.6. Display Properties pages ............................................................................................ 18
3.1.7. nView Properties pages .............................................................................................. 23
3.2. Windows®2000 Driver Installation ............................................................. 28
4. Troubleshooting Tips ........................................................................ 29
5. Appendix .......................................................................................... 30
5.1. How to Reflash the BIOS ........................................................................... 30
5.1.1. Reflash BIOS in MS-DOS mode ................................................................................. 30
5.1.2. Reflash BIOS in Windows mode ................................................................................ 30
5.2. Resolutions and Color Depth Table (In Windows®XP) ............................... 31
Introduction- 3 -
English
1. Introduction
1.1. Features
•Powered by NVIDIA®GeForce™6200 Graphics Processing Unit (GPU)
•Supports AGP 8X
•Integrated with 256 MB DDR2 memory
•Supports DirectX 9.0c
•Support AV / S-Video output
•Supports TV-Out and D-Sub (by adapter) connectors
•Supports DVI-I connector
1.2. Minimum System Requirement
•IBM®or 100% PC compatible with Pentium®III 650MHz or AMD Athlon 650MHz
class processor or higher
•One available AGP3.0 compliant slot or better
•Operating Systems Windows®2000 / Windows®XP
•64 MB system memory
•50 MB of available disk space for full installation
•CD-ROM or DVD-ROM drive
GV-N62256DP2-RH Graphics Accelerator - 4 -
English
2. Hardware Installation
2.1. Board Layout
TV-Out
DVI-I Connector
VGA Output
Analog LCD Monitor Analog CRT Monitor
Or
TV-Out
DVI-I Connector
Digital LCD Monitor
DVI Output
S-Video Output
AV Output
NTSC / PAL TV Projector
OR
NTSC / PAL TV Projector
OR
DVI-I to D-Sub
Connector
Hardware Installation- 5 -
English
Expansion cards contain very delicate Integrated Circuit (IC) chips. To
protect them against damage from static electricity, you should follow some
precautions whenever you work on your computer.
1. Turn off your computer and unplug power supply.
2. Use a grounded wrist strap before handling computer components. If you do not have
one, touch both of your hands to a safely grounded object or to a metal object, such as
the power supply case.
3. Place components on a grounded antistatic pad or on the bag that came with the
components whenever the components are separated from the system.
The card contains sensitive electric components, which can be easily damaged by static
electricity, so the card should be left in its original packing until it is installed.
Unpacking and installation should be done on a grounded anti-static mat. The operator
should be wearing an anti-static wristband, grounded at the same point as the anti-static
mat.
Inspect the card carton for obvious damage. Shipping and handling may cause damage
to your card. Be sure there are no shipping and handling damages on the card before
proceeding.
DO NOT APPLY POWER TO YOUR SYSTEM IF IT HAS BEEN DAMAGED ON
THE CARD.
In order to ensure your graphics card working correctly, please use official
Gigabyte BIOS only. Use none official Gigabyte BIOS might cause problem
on the graphics card.
GV-N62256DP2-RH Graphics Accelerator - 6 -
English
2.2. Hardware Installation
Installing Your Graphics Card.
Now that you have prepared your computer, you are ready to install your graphics accelerator
card.
To remove the existing graphics card:
1. Power off the computer and monitor, then
disconnect the display cable from the back
of your computer.
2. Remove the computer cover. If necessary,
consult your computer's manual for help in
removing the cover.
3. Remove any existing graphics card from
your computer.
Or, if your computer has any on-board
graphics capability, you may need to disable
it on the motherboard. For more information,
see your computer documentation.
Hardware Installation- 7 -
English
You are now ready to proceed with the installation of the graphics card driver. For detailed
instructions, select your operating system from the list below.
To install your new graphics card:
1. Locate the AGP slot. If necessary, remove
the metal cover from this slot; then align your
graphics card with theAGP slot, and press it
in firmly until the card is fully seated.
2. Replace the screw to fasten the card in place,
and replace the computer cover.
To TV or VCR
To Flat Panel Display
3. Plug the display cable into your graphics
card; then turn on the computer and monitor.
To connect a flat panel directly to your graphics
card, use the DVI-I connector. To connect a
VGA monitor to the DVI-I connector, plug
the DVI-I to D-sub adapter into the DVI-I
connector, then plug the monitor cable into
the adapter. Connect a flat panel
Connect a VGA monitor via DVI-I to D-sub adapter
GV-N62256DP2-RH Graphics Accelerator - 8 -
English
3. Software Installation
In this manual, we assume that your CD-ROM Drive letter to be Drive D:
The installation of Windows®2000 / Windows®XP drivers is very simple. When you insert the
driver CD into your CD-ROM drive, you can see the AUTORUN window (if it does not show
up, run "D:\setup.exe"). Then you can follow the guides to setup your graphics card driver.
(Please follow the subsection 3.1.3 "Driver installation" to install the driver for your graphics
accelerator.)
3.1. Windows®XP Driver and Utilities Installation
3.1.1. Operating System Requirement
•When loading the graphics card drivers for the system, please make sure your system
has installed DirectX 9 or later version.
•If you install the graphics card drivers for the motherboard, which consist of SIS or VIA
chipsets, please install the appropriate driver program for that motherboard. Or please
contact your motherboard nearest dealer for motherboard driver.
Software Installation- 9 -
English
Step 2. Choose I accept the agreement and
Click "Next" button.
Step 3. Click "Next" button.
3.1.2. DirectX installation
Install Microsoft DirectX to enable 3D hardware acceleration support for Windows®2000 or
Windows®XP to achieve better 3D performance.
0Note: For software MPEG support in Windows®2000 or Windows®XP, you must install
DirectX first. Users who run Windows XP with Service Pack 2 or above do not need to
install DirectX separately.
Step 1. When autorun window show up, click
the Install DirectX 9 item.
GV-N62256DP2-RH Graphics Accelerator - 10 -
English
Step 4. Click "Finish" to restart computer.
Then the DirectX 9 installation is completed.
Installing the components.
Tabla de contenidos
Otros manuales de Tarjeta de video de Gigabyte
Gigabyte
Gigabyte GV-N520D3-1GI Manual de usuario
Gigabyte
Gigabyte GV-N57128DP Manual de usuario
Gigabyte
Gigabyte GV-NX78T256V-B Manual de usuario
Gigabyte
Gigabyte GV-N550D5-1GI Manual de usuario
Gigabyte
Gigabyte GV-AV32DG Manual de usuario
Gigabyte
Gigabyte GV-R80X256V Manual de usuario
Gigabyte
Gigabyte GV-N450OC-1GI Manual de usuario
Gigabyte
Gigabyte GV-N590D5-3GD-B Manual de usuario
Gigabyte
Gigabyte GV-R80T256V Manual de usuario
Gigabyte
Gigabyte GV-R685D5-1GD Manual de usuario
Gigabyte
Gigabyte GV-NX66128D Manual de usuario
Gigabyte
Gigabyte GV-RX30HM256DP-RH Manual de usuario
Gigabyte
Gigabyte GV-AR64S-H Manual de usuario
Gigabyte
Gigabyte GeForce GTX 1050 Ti D5 Manual de usuario
Gigabyte
Gigabyte GV-N55128DP Manual de usuario
Gigabyte
Gigabyte GV-R577UD-1GD Manual de usuario
Gigabyte
Gigabyte GV-NX88T512H-B Manual de usuario
Gigabyte
Gigabyte GV-NX66L128DP Manual de usuario
Gigabyte
Gigabyte GV-NX96T1GHP Manual de usuario
Gigabyte
Gigabyte GV-RX19T512VB-RH Manual de usuario
Manuales populares de Tarjeta de video de otras marcas
Gainward
Gainward GeForce GTX 690 4GB Manual de usuario
ATI Technologies
ATI Technologies RADEON 137-40225-20 Manual de usuario
MSI
MSI N220GT series Manual de usuario
ATI Technologies
ATI Technologies RADEON 7000 MAC EDITION Manual de usuario
SIIG
SIIG aurora Manual de usuario
ClearSpeed
ClearSpeed ClearSpeed Advance e720 Manual de usuario
