Gigabyte W773-W80 Manual de usuario

W773-W80

Intel® Xeon® W W7 GPU Workstation

User Manual

Rev. 1.0

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without

prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of documentation:

 User Manual: detailed information & steps about the installation, conguration and use of this

product (e.g. motherboard, server barebones), covering hardware and BIOS.



User Guide: detailed information about the installation & use of an add-on hardware or

software component (e.g. BMC rmware, rail-kit) compatible with this product.

Quick Installation Guide: a short guide with visual diagrams that you can reference easily for

installation purposes of this product (e.g. motherboard, server barebones).

Please see the support section of the online product page to check the current availability of these

documents.

For More Information

For related product specications, the latest rmware and software, and other information please visit our website at

http://www.gigabyte.com

For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our reseller

portal: http://reseller.b2b.gigabyte.com

For further technical assistance, please contact your GIGABYTE representative or visit

https://esupport.gigabyte.com/ to create a new support ticket

For any general sales or marketing enquiries, you may also message GIGABYTE server directly by email:

server[email protected]

Conventions

The following conventions are used in this user's guide:

NOTE!

Gives bits and pieces of additional

information related to the current topic.

CAUTION!

Gives precautionary measures to

avoid possible hardware or software problems.

WARNING!

Alerts you to any damage that might

result from doing or not doing specic actions.

Warnings and Cautions

Before installing, be sure that you understand the following warnings and cautions.

WARNING!

To reduce the risk of electric shock or damage to the equipment:

• Do not disable the power cord grounding plug. The grounding plug is an important safety

feature.

• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all

times.

• Unplug all the power cords from the power supplies to disconnect power to the equipment.

• Shock Hazard! Disconnect all power supply cords before servicing.

• Do not route the power cord where it can be walked on or pinched by items placed against it.

Pay particular attention to the plug, electrical outlet, and the point where the cord extends from

the server.

WARNING!

To reduce the risk of personal injury from hot surfaces, allow the drives

and the internal system components to cool before touching them.

CAUTION!

• Do not operate the system for long periods with the access panel open or removed. Operat-

ing the system in this manner results in improper airow and improper cooling that can lead to

thermal damage.

• Danger of explosion if battery is incorrectly replaced.

• Replace only with the same or equivalent type recommended by the manufacturer.

• Dispose of used batteries according to the manufacturer’s instructions.

Electrostatic Discharge (ESD)

CAUTION!

ESD CAN DAMAGE DRIVES, BOARDS, AND OTHER PARTS. WE RECOMMEND THAT YOU

PERFORM ALL PROCEDURES AT AN ESD WORKSTATION. IF ONE IS NOT AVAILABLE,

PROVIDE SOME ESD PROTECTION BY WEARING AN ANTI-STATIC WRIST STRAP AT-

TACHED TO CHASSIS GROUND -- ANY UNPAINTED METAL SURFACE -- ON YOUR SERVER

WHEN HANDLING PARTS.

Always handle boards carefully. They can be extremely sensitive to ESD. Hold boards only by

their edges without any component and pin touching. After removing a board from its protective

wrapper or from the system, place the board component side up on a grounded, static free sur-

face. Use a conductive foam pad if available but not the board wrapper. Do not slide board over

any surface.

System power on/o󰀨: To remove power from system, you must remove the system from

rack. Make sure the system is removed from the rack before opening the chassis, adding, or

removing any non hot-plug components.

Hazardous conditions, devices and cables: Hazardous electrical conditions may be

present on power, telephone, and communication cables. Turn off the system and discon-nect

the cables attached to the system before servicing it. Otherwise, personal injury or equipment

damage can result.

Electrostatic discharge (ESD) and ESD protection: ESD can damage drives,

boards, and other parts. We recommend that you perform all procedures in this chapter only at

an ESD workstation. If one is not available, provide some ESD protection by wearing an antistatic

wrist strap attached to chassis ground (any unpainted metal surface on the server) when handling

parts.

ESD and handling boards: Always handle boards carefully. They can be extremely

sensi-tive to electrostatic discharge (ESD). Hold boards only by their edges. After removing a

board from its protective wrapper or from the system, place the board component side up on a

grounded, static free surface. Use a conductive foam pad if available but not the board wrapper.

Do not slide board over any surface.

Installing or removing jumpers: A jumper is a small plastic encased conductor that slips

over two jumper pins. Some jumpers have a small tab on top that can be gripped with n-gertips

or with a pair of ne needle nosed pliers. If the jumpers do not have such a tab, take care when

using needle nosed pliers to remove or install a jumper; grip the narrow sides of the jumper with

the pliers, never the wide sides. Gripping the wide sides can dam-age the contacts inside the

jumper, causing intermittent problems with the function con-trolled by that jumper. Take care to

grip with, but not squeeze, the pliers or other tool used to remove a jumper, or the pins on the

board may bend or break.

CAUTION!

Risk of explosion if battery is replaced incorrectly or with an incorrect type. Replace the battery

only with the same or equivalent type recommended by the manufacturer. Dispose of used bat-

teries according to the manufacturer’s instructions.

Regulatory Notices

WEEE Symbol Statement

The symbol shown below is on the product or on its packaging, which indicates that this

product must be disposed of with other waste. Instead, the device should be taken to the

waste collection centers for activation of the treatment, collection, recycling and disposal

procedure. The separate collection and recycling of your waste equipment at the time of

disposal will help to conserve natural resources and ensure that it is recycled in a manner

that protects human health and the environment.

For more information about where you can drop off your waste equipment for recycling,

please contact your local government ofce, your household waste disposal service or where you purchased

the product for details of environmentally safe recycling.

●When your electrical or electronic equipment is no longer useful to you, "take it back" to your local or

regional waste collection administration for recycling.

Restriction of Hazardous Substances (RoHS) Directive Statement

GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6,

PBDE and PBB). The parts and components have been carefully selected to meet RoHS requirement. More-

over, we at GIGABYTE are continuing our efforts to develop products that do not use internationally banned

toxic chemicals.

California Proposition 65 Warning

WARNING!

This product can expose you to chemicals including Lead, which is known to the State

of California to cause cancer, and Bisphenol A (BPA), which is known to the State of

California to cause birth defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov.

Battery WARNING!

This product can expose you to chemicals including Lead, which is known to the State

of California to cause cancer, and Bisphenol A (BPA), which is known to the State of

California to cause birth defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov.

ႝᏔೕϷ٬Ҕྕࡋ;!ୖԵаΠ኱Ң

Rang)ҬࢬᒡΕ*

Operang Temperature

Non-operang temperature

Operang humidity

Non-operang humidity

10°C to 35°C

100-240V~, 12-6A, 50-60Hz

-40°C to 60°C

8%-80% (non-condensing)

20%-95% (non-condensing)

伺服器相關警告與注意事項

警告

為了避免電擊危險或損壞設備請注意:

• 不要切斷電源線的接地端子，接地端子是一個很重要的安全防護。

• 將電源線接到有接地功能的插座，此插座需位於使用者容易使用的範圍。

• 電源線的配線要避免被踩到，被絆到或被過度彎折，重壓。

警告

• 本設備關機後內部仍存在電源，須拔掉電源線才能完全切掉設備內部的電源。

• 更換零件前請確定電源已經完全切斷。

• 電源線,電話線，網路線可能帶電，維修前除了移除電源線外也請移除所有連接線，避

免電擊傷害或是設備損壞。

• 維修非支援熱插拔的零件時須將伺服器從機櫃取下才能維修。

警告

• 避免人員燙傷，觸摸磁碟機或是內部零件前請確保該零件已經冷卻。

警告

• 伺服器中有高速風扇，維修時請遠離風扇避免受傷。

警告

• 本設備不能用在有兒童出現的區域。

警告

• 如果更換錯誤電池會產生爆炸，請以相同或同型號電池更換使用。

• 廢電池請回收。

᝾֋Ǻӵ݀׳ඤᒱᇤႝԣ཮ౢғᛈࣆ!!ፎа࣬ӕ܈ӕࠠႝԣ׳ඤ٬Ҕ

注意

• 伺服器開機時不要長時間移除蓋子，長時間移除蓋子會造成散熱功能失效造成損壞。

注意

• 靜電會損害電子產品，建議您在符合靜電防護的工作環境操作伺服器，如果無法確定

環境的靜電防護。請穿上靜電手環並且將手環接到有接地的金屬表面如機櫃或機殼。

• 拿取電路板時僅觸碰板子的邊緣，不要觸碰連接器。板子從防靜電包裝取出後只能放

置在無靜電的桌面，零件面朝上。如果可以, 請使用防靜電泡棉. 避免使用靜電袋. 避免

電路板與任何表面摩擦產生靜電。

- 11 -

Table of Contents

Chapter 1 Hardware Installation ...................................................................................13

1-1 Installation Precautions.................................................................................. 13

1-2 Product Specications.................................................................................... 14

1-3 System Block Diagram................................................................................... 17

Chapter 2 System Appearance.....................................................................................18

2-1 Front View...................................................................................................... 18

2-2 Rear View....................................................................................................... 19

2-3 Rear Panel System LAN LEDs ...................................................................... 20

Chapter 3 System Hardware Installation ......................................................................21

3-1 Removing and Installing the Chassis Cover .................................................. 22

3-2 Installing the CPU .......................................................................................... 23

3-3 Installing the Memory..................................................................................... 24

3-3-1 Four Channel Memory Conguration .....................................................................24

3-3-2 Installing the Memory ............................................................................................25

3-4 Installing the PCI Expansion Card ................................................................. 26

3-5 Installing the Hard Disk Drive......................................................................... 27

3-6 Installing and Removing the M.2 SSD Module............................................... 28

3-7 Installing and Removing the M.2 WiFi Module............................................... 28

3-8 Peripheral Devices Connection...................................................................... 29

Chapter 4 Motherboard Components ...........................................................................30

4-1 Motherboard Components ............................................................................. 30

4-2 Jumper Setting .............................................................................................. 32

Chapter 5 BIOS Setup ..................................................................................................33

5-1 The Main Menu .............................................................................................. 35

5-2 Advanced Menu ............................................................................................. 38

5-2-1 Trusted Computing .................................................................................................39

5-2-2 Serial Port Console Redirection .............................................................................41

5-2-3 SIO Conguration...................................................................................................44

5-2-4 PCI Subsystem Settings.........................................................................................45

5-2-5 USB Conguration..................................................................................................47

5-2-6 Network Stack Conguration ..................................................................................48

5-2-7 Post Report Conguration ......................................................................................49

5-2-8 NVMe Conguration ...............................................................................................50

5-2-9 Chipset Conguration .............................................................................................51

5-2-10 Tls Auth Conguration ............................................................................................52

Tabla de contenidos

Otros manuales de Placa madre de Gigabyte

Gigabyte

Gigabyte GA-Z77N-WIFI Manual de usuario

Gigabyte

Gigabyte GA-Z170X-Gaming 3 Manual de usuario

Gigabyte

Gigabyte B760M AORUS ELITE AX Manual de usuario

Gigabyte

Gigabyte Z690I AORUS ULTRA Manual de usuario

Gigabyte

Gigabyte GA-G41MT-ES2L Manual de usuario

Gigabyte

Gigabyte GA-7N400S-L Manual de usuario

Gigabyte

Gigabyte GA-7VKML Manual de usuario

Gigabyte

Gigabyte GA-H57M-USB3 Manual de usuario

Gigabyte

Gigabyte GA-7TCSV4 Manual de usuario

Gigabyte

Gigabyte H410M HD3P Manual de usuario

Gigabyte

Gigabyte GA-A320M-DS2 Manual de usuario

Gigabyte

Gigabyte GA-SBC7100 Manual de usuario

Gigabyte

Gigabyte MSH87DI-SI Manual de usuario

Gigabyte

Gigabyte GS-R22PFL Manual de usuario

Gigabyte

Gigabyte 8I845GE-RZ Manual de usuario

Gigabyte

Gigabyte GA-J3355N-D2P Manual de usuario

Gigabyte

Gigabyte GA-990FX-Gaming Manual de usuario

Gigabyte

Gigabyte GA-6WFZ7 Manual de usuario

Gigabyte

Gigabyte GA-7PCSL Manual de usuario

Gigabyte

Gigabyte GA-8IE2004 Manual de usuario

Gigabyte

Gigabyte 6BXS Manual de usuario

Gigabyte

Gigabyte GA-8IPE1000 Series Manual de usuario

Gigabyte

Gigabyte 6BX Manual de usuario

Gigabyte

Gigabyte H610M H DDR4 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario