Gigabyte MN525BI Manual de usuario

MN525RI

MN525MI

Intel®D525 Processor Motherboards

User's Manual

Rev. 1001

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specifications and features in this manual may be made by GIGABYTE

without prior notice. No part of this manual may be reproduced, copied, translated, transmitted,

or published in any form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of documentations:

For quick set-up of the product, read the Quick Installation Guide included with the product.

For detailed product information, carefully read the User's Manual.

For product-related information, check on our website at:

http://www.gigabyte.com

- 3 -

Table of Contents

MN525RI Motherboard Layout ........................................................................................4

Chapter 1 Hardware Installation .....................................................................................6

1-1 Installation Precautions.................................................................................... 6

1-2 ProductSpecications...................................................................................... 7

1-3 Installing the Memory....................................................................................... 9

1-3-1 DualChannelMemoryConguration .......................................................................9

1-3-2 Installing a Memory ...............................................................................................10

1-4 Back Panel Connectors.................................................................................. 11

1-5 Internal Connectors........................................................................................ 12

- 4 -

MN525RI Motherboard Layout

- 5 -

Item Code Description

1 ESATA1 eSATA port

2 BATTERY Battery socket

3 USB_LAN1 USB ports and LAN port

4 CLR_CMOS Clear CMOS jumper

5 USB_LAN2 USB ports and LAN port

6 VGA VGA port

7 ATX_12V 4 pin power connector

8 FAN1 CPU fan cable connector

9 FAN2 System fan cable connector

10 CPU_HS Processor

11 SODIMMA DDR3 SO-DIMM slot

12 SODIMMB DDR3 SO-DIMM slot

13 ATX 24 pin power connector

14 F_PANEL Front panel connector

15 SATAII1~5 SATA cable connectors

16 F_USB2 Front USB cable connector

17 F_USB1 Front USB cable connector

18 PCIE4X PCI-E x4 slot

19 80H LPC80 connector

20 COM Serial cable connector

- 6 - Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can

become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read

the user's manual and follow these procedures:

• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

• Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

• When connecting hardware components to the internal connectors on the motherboard,

make sure they are connected tightly and securely.

• When handling the motherboard, avoid touching any metal leads or connectors.

• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic com-

ponents such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keep your hands dry and rst touch a metal object to eliminate static electricity.

•

Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

• Before unplugging the power supply cable from the motherboard, make sure the power sup-

ply has been turned off.

• Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

• Before using the product, please verify that all cables and power connectors of your hard-

ware components are connected.

• To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

• Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

• Do not place the computer system on an uneven surface

• Do not place the computer system in a high-temperature environment.

• Turning on the computer power during the installation process can lead to damage to sys-

tem components as well as physical harm to the user.

• If you are uncertain about any installation steps or have a problem related to the use of the

product, please consult a certied computer technician.

Chapter 1 Hardware Installation

Hardware Installation - 7 -

1-2 ProductSpecications

CPU Supports single Intel® D525 processor

Supports 1.8GHz

Chipset Intel®ICH9R

Memory 2 x SO-DIMM slot support DDR3 800/1066/1333

Support up 8GB

LAN 1 x Intel®82574L supports 10/100/1000 Mbps

1 x Intel®82567LM supports 10/100/1000 Mbps

Expansion Slots 1 x PCI Express x4 slot

Onboard

Graphics

Build in Intel®Integrated GMA3150

Storage Interface 5 x SATA 3Gb/s connectors

USB Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected

to the internal USB headers)

Internal

Connectors

1 x 24 pin ATX power connector

1 x 4 pin ATX 12V power connector

5 x SATA 3Gb/s connectors

1 x CPU fan header

1 x system fan header

1 x serial cable connector

1 x front panel header

2 x USB 2.0 headers

Back Panel

Connectors

4 x USB 2.0 ports

2 x RJ-45 port

1 x VGA port

1 x eSATA port

I/O Controller iTE IT8721F chip

Hardware

Monitor

System voltage detection

CPU/System temperature detection

CPU/System fan speed control

* Whether the CPU/system fan speed control function is supported will depend on

the CPU/system cooler you install.

BIOS AMI BIOS

- 8 - Hardware Installation

Form Factor Mini ITX Form Factor; 6.75 inch x 6.75 inch

* GIGABYTE reserves the right to make any changes to the product specications and product-related information

without prior notice.

Hardware Installation - 9 -

1-3 Installing the Memory

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the

same capacity, brand, speed, and chips be used.

(

Go to GIGABYTE's website for the latest supported memory speeds and memory modules.

)

•Always turn off the computer and unplug the power cord from the power outlet before installing

the memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direc-

tion. If you are unable to insert the memory, switch the direction.

1-3-1 DualChannelMemoryConguration

This motherboard provides four DDR3 memory sockets and supports Dual Channel Technology. After the

memory is installed, the BIOS will automatically detect the specications and capacity of the memory. En-

abling Dual Channel memory mode will double the original memory bandwidth.

The four DDR3 memory sockets are divided into two channels and each channel has two memory sockets as

following:

Channel A: SODIMMA

Channel B: DIMM1B, DIMM2B

SODIMMA

SODIMMB

Hardware Installation - 10 -

1-3-2 Installing a Memory

Before installing a memory module, make sure to turn off the computer and unplug the power

cord from the power outlet to prevent damage to the memory module.

Be sure to install DDR3 DIMMs on this motherboard.

Installation Step:

Step 1. Align the memory with the DIMM module and insert the DIMM memory module into the DIM slot.

Please note that memory module has a foolproof insertion design. A memory module can be

installed In only one direction.

Step 2. Push down the memory and seat it rmly.

Step 3. Reverse the installation steps when you wish to remove the DIMM module.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de Gigabyte

Gigabyte

Gigabyte GA-H81TN Manual de usuario

Gigabyte

Gigabyte GA-8I865GME Manual de usuario

Gigabyte

Gigabyte GA-Z77X-UD3H Manual de usuario

Gigabyte

Gigabyte B360M HD3 Manual de usuario

Gigabyte

Gigabyte B650 AERO G Manual de usuario

Gigabyte

Gigabyte H370N WIFI Manual de usuario

Gigabyte

Gigabyte GA-Z270M-D3H Manual de usuario

Gigabyte

Gigabyte GA-P67A-UD4 Manual de usuario

Gigabyte

Gigabyte GA-H67A-UD3H-B3 Manual de usuario

Gigabyte

Gigabyte GA-945GM-DS2 Manual de usuario

Gigabyte

Gigabyte GA-946GM-DS2 Manual de usuario

Gigabyte

Gigabyte GA-P35T-DQ6 Manual de usuario

Gigabyte

Gigabyte GA-7N400S-L Manual de usuario

Gigabyte

Gigabyte GA-IMB410N Manual de usuario

Gigabyte

Gigabyte B365M H Manual de usuario

Gigabyte

Gigabyte GA-A55M-DS2 Manual de usuario

Gigabyte

Gigabyte GA-H77N-WIFI Manual de usuario

Gigabyte

Gigabyte GA-B75-D3V Manual de usuario

Gigabyte

Gigabyte GA-6CXC7 Manual de usuario

Gigabyte

Gigabyte GA-P43T-ES3G Manual de usuario

Gigabyte

Gigabyte B650M D2H Manual de usuario

Gigabyte

Gigabyte GA-8IG1000 Pro-G Manual de usuario

Gigabyte

Gigabyte GA-C1037UN-LA Manual de usuario

Gigabyte

Gigabyte GA-8I915P-D Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario