Gigabyte GA-PICO3350 Manual de usuario

GA-PICO3350

User's Manual

Rev. 1001

To reduce the impacts on global warming, the packaging materials of this product

are recyclable and reusable. GIGABYTE works with you to protect the environment.

For more product details, please visit GIGABYTE's website.

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or

by any means without GIGABYTE's prior written permission.

In order to assist in the use of this product, carefully read the User's Manual.

For product-related information, check on our website at: https://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0" means

the revision of the motherboard is 1.0. Check your motherboard revision before updating motherboard

BIOS, drivers, or when looking for technical information.

Example:

Sept. 6, 2019

Motherboard

GA-PICO3350

Sept. 6, 2019

Motherboard

GA-PICO3350

- 3 -

Table of Contents

GA-PICO3350 Motherboard Layout ................................................................................4

Chapter 1 Hardware Installation .....................................................................................5

1-1 Installation Precautions.................................................................................... 5

1-2 ProductSpecications...................................................................................... 6

1-3 Installing the Memory....................................................................................... 8

1-4 Installing an Expansion Card ........................................................................... 8

1-5 Back Panel Connectors.................................................................................... 8

1-6 Internal Connectors.......................................................................................... 9

Chapter 2 BIOS Setup ..................................................................................................19

2-1 Startup Screen ............................................................................................... 19

2-2 Main ............................................................................................................... 20

2-3 Advanced ....................................................................................................... 21

2-4 Security .......................................................................................................... 25

2-5 Boot................................................................................................................ 27

2-6 Save & Exit..................................................................................................... 29

Chapter 3 Appendix ......................................................................................................30

Drivers Installation..................................................................................................... 30

Regulatory Statements.............................................................................................. 31

Contact Us ................................................................................................................ 33

- 4 -

GA-PICO3350 Motherboard Layout

* The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

Box Contents

5GA-PICO3350 motherboard 5Two SATA cables

5Motherboard driver disc 5One SATA power cable

5User's Manual 5One USB cable

5One COMA/B port cable 5One heatsink

5One Audio cable

(Note) This chip/connector is on the back of the motherboard.

SATA3_0

FPD

AUDIO

CODEC (Note)

iTE®

Super I/O

DCIN_PWR

R_USB30

SODIMM_1 (Note)

Intel®Apollo Lake

SoC N3350 (Note)

LAN

HDMI

HS_1A

GPIO

SATA_PWR

GA-PICO3350

LVDS

BAT

M_BIOS

TPM IC

MSATA_MPCIE

F_USB

M2_WIFI

F_PANEL COMAB

SMBUS

COM_PW

LCDVCC_MON

Realtek®

GbE LAN

- 5 -

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before connecting or unplugging the power supply cable from the motherboard, make sure

the power supply has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Do not place the computer system on an uneven surface.

•Do not place the computer system in a high-temperature or wet environment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

•If you use an adapter, extension power cable, or power strip, ensure to consult with its installation

and/or grounding instructions.

- 6 -

1-2 ProductSpecications

CPU Built in with an Intel®Dual-Core Celeron®N3350 SoC (2.4 GHz)

* Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage

to these components.

2 MB Cache

Memory 1 x DDR3L SO-DIMM socket supporting up to 8 GB of system memory

Support for DDR3L 1866/1600/1333 MHz memory module

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated in the SoC:

- 1 x HDMI port, supporting a maximum resolution of 3840x2160@30 Hz

Maximum shared memory of 512 MB

Audio Realtek®ALC887codec

High Denition Audio

2-channel

LAN Realtek®GbE LAN chip (10/100/1000 Mbit)

Expansion Slots 1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI)

1 x full size Mini PCIe slot (MSATA_MPCIE)

* The MSATA_MPCIE slot can also be used as an MSATA connector.

Storage Interface Integrated in the SoC:

- 1 x SATA 6Gb/s connectors

- 1 x MSATA connector (MSATA_MPCIE)

USB Integrated in the SoC:

- 2 x USB 3.0/2.0 ports on the back panel

- 2 x USB 2.0/1.1 ports available through the internal USB headers

Internal

Connectors

1 x SATA 6Gb/s connector

1 x SATA power connector

1 x front panel header

1xatpaneldisplayheader

1 x front panel audio header

1 x USB 2.0/1.1 header

1 x serial port header

1 x serial port power select jumper (COM_PW)

1 x LCDVCC/MON header (LCDVCC_MON)

1 x LVDS header

1 x GPIO header

1 x SMBUS

1 x Battery Cable header

Back Panel

Connectors

1 x DC In power jack

1 x HDMI port

2 x USB 3.0/2.0 ports

1 x RJ-45 port

- 7 -

I/O Controller iTE®I/O Controller Chip

Hardware

Monitor

Voltage detection

Temperature detection

BIOS 1x128Mbitash

Use of licensed AMI UEFI BIOS

PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features Support for Xpress Install

Support for @BIOS

Support for APP Center

* Available applications in APP Center may vary by motherboard model. Supported

functionsofeachapplicationmayalsovarydependingonmotherboardspecications

Bundled

Software Norton®Internet Security (OEM version)

Operating

System Support for Windows 10 64-bit

Form Factor Pico-ITX Form Factor; 10.0cm x 7.2cm

*GIGABYTEreservestherighttomakeanychangestotheproductspecicationsandproduct-relatedinformationwithout

prior notice.

Please visit GIGABYTE's website

for support lists of CPU, memory

modules, and SSDs.

Please visit the Support\Utility List

page on GIGABYTE's website to

download the latest version of apps.

1-3 Installing the Memory

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory.

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

1-4 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

•Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

•Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

- 8 -

1-5 Back Panel Connectors

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

After installing the HDMI device, make sure to set the default sound playback device to HDMI. (The

item name may differ depending on your operating system.)

USB 3.0/2.0 Port

The USB 3.0 port supports the USB 3.0specicationandiscompatibletotheUSB2.0/1.1specication.

Use this port for USB devices.

HDMI Port

The HDMI port is HDCP compliant and supports Dolby TrueHD and DTS HD

Master Audio formats. It also supports up to 192KHz/24bit 8-channel LPCM

audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported

resolution is 3840x2160@30 Hz, but the actual resolutions supported are dependent on the monitor being

used.

Activity LED

Connection/Speed LED Activity LED:Connection/Speed LED:

State Description

Orange 1 Gbps data rate

Green 100 Mbps data rate

Off 10 Mbps data rate

State Description

Blinking Data transmission or receiving is occurring

Off

No data transmission or receiving is occurring

•Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour

device and then remove it from the motherboard.

•When removing the cable, pull it straight out from the connector. Do not rock it side to side to

prevent an electrical short inside the cable connector.

DC In Power Jack

Connect the DC power to this port. This port supports 12V power.

- 9 -

Read the following guidelines before connecting external devices:

•First make sure your devices are compliant with the connectors you wish to connect.

•Before installing the devices, be sure to turn off the devices and your computer. Unplug the power

cord from the power outlet to prevent damage to the devices.

•After installing the device and before turning on the computer, make sure the device cable has

been securely attached to the connector on the motherboard.

1-6 Internal Connectors

1) SATA3 0

2) SATA_PWR

3) BAT

4) F_PANEL

5) F_USB

6) AUDIO

7) LCDVCC_MON

8) FPD

9) GPIO

10) COMAB

11) COM_PW

12) SMBUS

13) LVDS

13 8

- 10 -

Pin No. Denition

1 GND

2 TXP

3 TXN

4 GND

5 RXN

6 RXP

7 GND

1) SATA3 0 (SATA 6Gb/s Connector)

The SATA connector conforms to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s

standard. Each SATA connector supports a single SATA device.

DEBUG

PORT

G.QBOFM

1 7

2) SATA_PWR (SATA Power Connector)

The connector provides power to installed SATA device.

Pin No. Denition

1 GND

2 VCC

3 +12V

4 GND

3) BAT (Battery/Battery Cable Header)

Thebatteryprovidespowertokeepthevalues(suchasBIOScongurations,date,andtimeinformation)

in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a

low level, or the CMOS values may not be accurate or may be lost.

1(+) 2(-)

Pin No. Denition

1(+) RTC Power

2 (-) GND

F_USB30 F_U

B_ 

F_  F_ 



_

B

BS_

B

SB_

B

_S



S_

_

B

_U

_

B





 

S  

 

123

 

123

 

123

 

123

BSS

S

_S 

SSU

 

1 2 3  

 S3 BSSS



U

 __ 3

F_USB3F

S  _

SF





B_

F

_0

S

S

_0F

_F

_

_

__B





U

S  _S

_ SF_

B 

USB0_B

B_ F_USB3

 F_USB303



_



_3U

S_

SS_F 

You may clear the CMOS values by removing the battery cable:

1. Turn off your computer and unplug the power cord.

2. Unplug the battery cable from the battery cable header and wait for one minute.

3. Plug in the battery cable.

4. Plug in the power cord and restart your computer.

•Always turn off your computer and unplug the power cord before replacing the battery.

•Replace the battery with an equivalent one. Danger of explosion if the battery is replaced with

an incorrect model.

•Contact the place of purchase or local dealer if you are not able to replace the battery by yourself

or uncertain about the battery model.

•When installing the battery, note the orientation of the positive side (+) and the negative side (-)

of the battery (the positive side should face up).

•Used batteries must be handled in accordance with local environmental regulations.

F_USB30 F_U

B_ 

F_  F_ 



_

B

BS_

B

SB_

B

_S



S_

_

B

_U

_

B





 

S  

 

123

 

123

 

123

 

123

BSS

S

_S 

SSU

 

1 2 3  

 S3 BSSS



U

 __ 3

F_USB3F

S  _

SF





B_

F

_0

S

S

_0F

_F

_

_

__B





U

S  _S

_ SF_

B 

USB0_B

B_ F_USB3

 F_USB303



_



_3U

S_

SS_F 

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de Gigabyte

Gigabyte

Gigabyte B550M H Manual de usuario

Gigabyte

Gigabyte GA-X99-SOC Force Manual de usuario

Gigabyte

Gigabyte GA-MA78GM-S2H Manual de usuario

Gigabyte

Gigabyte GA-H110M-Wind Manual de usuario

Gigabyte

Gigabyte GA-8EGXRP Series Manual de usuario

Gigabyte

Gigabyte GA-EP45T-EXTREME Manual de usuario

Gigabyte

Gigabyte B760M D2H Manual de usuario

Gigabyte

Gigabyte GA-H170N-WIFI Manual de usuario

Gigabyte

Gigabyte GA-8ST667 Manual de usuario

Gigabyte

Gigabyte GA-73UM-S2H Manual de usuario

Gigabyte

Gigabyte GA-N3050N-D3H Manual de usuario

Gigabyte

Gigabyte H610M GAMING WIFI DDR4 Manual de usuario

Gigabyte

Gigabyte GA-P85-D3T Manual de usuario

Gigabyte

Gigabyte H310M S2 2.0 Manual de usuario

Gigabyte

Gigabyte B450M DS3H Manual de usuario

Gigabyte

Gigabyte 6BXM Manual de usuario

Gigabyte

Gigabyte 6GXU Manual de usuario

Gigabyte

Gigabyte GA-8I945PMF Manual de usuario

Gigabyte

Gigabyte GA-8IG1000MF Series Manual de usuario

Gigabyte

Gigabyte GA-7PCSLD Manual de usuario

Gigabyte

Gigabyte Z790 UD AX Manual de usuario

Gigabyte

Gigabyte GA-H55M-S2V Manual de usuario

Gigabyte

Gigabyte GA-Z170X-Gaming 5 Manual de usuario

Gigabyte

Gigabyte GA-8IEXRR Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario