Gigabyte GA-IMBLAP3455 Manual de usuario

GA-IMBLAP3455

User's Manual

Rev. 1001

To reduce the impacts on global warming, the packaging materials of this product

are recyclable and reusable. GIGABYTE works with you to protect the environment.

For more product details, please visit GIGABYTE's website.

- 2 -

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without

prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in any form

or by any means without GIGABYTE's prior written permission.

In order to assist in the use of this product, carefully read the User's Manual.

For product-related information, check on our website at: https://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0"

means the revision of the motherboard is 1.0. Check your motherboard revision before updating

motherboard BIOS, drivers, or when looking for technical information.

Example:

- 3 -

Table of Contents

GA-IMBLAP3455 Motherboard Layout............................................................................4

Chapter 1 Hardware Installation .....................................................................................5

1-1 Installation Precautions.................................................................................... 5

1-2 Product Specications...................................................................................... 6

1-3 Installing the Memory....................................................................................... 8

1-4 Installing an Expansion Card ........................................................................... 8

1-5 Back Panel Connectors.................................................................................... 8

1-6 Internal Connectors........................................................................................ 10

Chapter 2 BIOS Setup ..................................................................................................22

2-1 Startup Screen ............................................................................................... 22

2-2 Main ............................................................................................................... 23

2-3 Advanced ....................................................................................................... 24

2-4 Security .......................................................................................................... 28

2-5 Boot................................................................................................................ 30

2-6 Save & Exit..................................................................................................... 32

Chapter 3 Appendix ......................................................................................................33

Drivers Installation..................................................................................................... 33

Regulatory Notices.................................................................................................... 34

Contact Us ................................................................................................................ 35

- 4 -

GA-IMBLAP3455 Motherboard Layout

* The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

(Note) This chip is on the back of the motherboard.

GA-IMBLAP3455

DC_PWR

ATX_12V LVDS

SATA_PWR

M_BIOS

SYS_FAN

PCIEX1

FPD_PWR

FPD

CLR_CMOS

DMIC_CON

F_AUDIO

BAT_CON F_PANEL

BL_SW

LCD_VCC

COMB

MON_SW

RUSB30_2

RUSB30_1

Intel®Apollo Lake SoC J3455E

SPEAKER

LPT_GPIO

COMD COMF

FUSB20_1

BAT

MIC_IN

COMA COMC

MINI_PCIE

SATA3

M.2

LINE_OUT CODEC

SPKR

iTE®

Super I/O (Note)

HDMI

LAN1

LAN2

Realtek®GbE LAN

SODIMM_2

SODIMM_1

COME

Realtek®GbE LAN

VGA

VGA_CONN

60 CPU_FAN

SMBUS

FUSB20_2

I2C

COMA_PW COMB_PW COMC_PW COMD_PW COME_PW

COMF_PW GPIO_SET BIOS_SET GPIO_PWRSEL LPT_SEL

B_BIOS (Note)

Box Contents

5GA-IMBLAP3455 motherboard

5Motherboard driver disc 5One SATA power cable

5User's Manual 5One COM port cable

5Two SATA cables 5One LPT port cable

5Two I/O Shields (high/low)

- 5 -

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keep your hands dry and rst touch a metal object to eliminate static electricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before connecting or unplugging the power supply cable from the motherboard, make sure

the power supply has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Do not place the computer system on an uneven surface.

•Do not place the computer system in a high-temperature or wet environment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product, please consult a certied computer technician.

•If you use an adapter, extension power cable, or power strip, ensure to consult with its installation

and/or grounding instructions.

- 6 -

1-2 ProductSpecications

CPU Built in with an Intel®Quad-Core Celeron®J3455E SoC (2.3 GHz)

* Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage

to these components.

2 MB Cache

Memory 2 x DDR3L SO-DIMM sockets supporting up to 16 GB of system memory

Dual channel memory architecture

Support for DDR3L 1866/1600 MHz memory module

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated in the SoC:

- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz

- 1 x HDMI port, supporting a maximum resolution of 3840x2160@30 Hz

Maximum shared memory of 512 MB

Audio Realtek®ALC887codec

High Denition Audio

2/4/5-channel

LAN 2 x Realtek®GbE LAN chips (1000/100 Mbit)

Expansion Slots 1 x PCI Express x1 slot

1 x Mini PCIe slot (MINI_PCIE)

(The PCIe Express x1 and Mini PCIe slots conform to PCI Express 2.0 standard.)

Storage Interface Integrated in the SoC:

- 2 x SATA 6Gb/s connectors

- 1 x M.2 connector (Socket 3, M key, type 2242/2260 SATA and PCIe x1 SSD

support)

* Refer to "1-6 Internal Connectors," for the installation notices for the M.2 and SATA

connectors.

USB Integrated in the SoC:

- 4 x USB 3.1 Gen 1 ports on the back panel

- 4 x USB 2.0/1.1 ports available through the internal USB headers

Internal

Connectors

1 x 4-pin ATX 12V power connector

1 x CPU fan header

1 x system fan header

2 x SATA 6Gb/s connectors

1 x M.2 Socket 3 connector

1 x SATA power connector

1 x front panel header

1 x front panel audio header

1 x battery cable header

2 x USB 2.0/1.1 headers

6 x serial port headers

6 x serial port power select jumpers

1 x D-Sub header

1 x LVDS header

1 x LVDS drive voltage jumper (LCD_VCC)

1 x at panel display header (FPD)

1 x at panel display power select jumper (FPD_PWR)

1 x at panel display switch header (MON_SW)

1 x backlight switch header (BL_SW)

- 7 -

Internal

Connectors

1 x digital microphone header (DMIC_CON)

1 x speaker header (SPKR)

1 x buzzer header (SPEAKER)

1 x chassis intrusion jumper

1 x LPT/GPIO header (LPT_GPIO)

1 x LPT conguration jumper (LPT_SEL)

1 x GPIO power selection jumper (GPIO_PWRSEL)

1 x GPIO status conguration jumper (GPIO_SET)

1 x BIOS Select jumper (BIOS_SET)

1 x Clear CMOS jumper

1 x I2C

1 x SMBUS

Back Panel

Connectors

1 x DC-In power connector

1 x HDMI port

1 x D-Sub port

4 x USB 3.1 Gen 1 ports

2 x RJ-45 ports

2 x audio jacks (Line In, Mic In)

I/O Controller iTE®I/O Controller Chip

Hardware

Monitor

Voltage detection

Temperature detection

Fan speed detection

BIOS 2 x 64 Mbit ash

Use of licensed AMI UEFI BIOS

PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features Support for Xpress Install

Support for @BIOS

Support for APP Center

* Available applications in APP Center may vary by motherboard model. Supported

functions of each application may also vary depending on motherboard specications

Bundled

Software Norton®Internet Security (OEM version)

Operating

System Support for Windows 10 64-bit

Form Factor Thin Mini-ITX Form Factor; 17.0cm x 17.0cm

* GIGABYTE reserves the right to make any changes to the product specications and product-related information without

prior notice.

Please visit GIGABYTE's website

for support lists of memory modules,

SSDs, and M.2 devices..

Please visit the Support\Utility List

page on GIGABYTE's website to

download the latest version of apps.

- 8 -

1-3 Installing the Memory

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the same

capacity, brand, speed, and chips be used.

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

1-4 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

•Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

•Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

1-5 Back Panel Connectors

DualChannelMemoryConguration

This motherboard provides two memory sockets and supports Dual Channel Technology. After the memory

is installed, the BIOS will automatically detect the specications and capacity of the memory. Enabling Dual

Channel memory mode will double the original memory bandwidth.

The two memory sockets are divided into two channels and each channel has one memory socket as following:

Channel A: SODIMM_1

Channel B: SODIMM_2

Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.

1. Dual Channel mode cannot be enabled if only one memory module is installed.

2. When enabling Dual Channel mode with two or four memory modules, it is recommended that memory

of the same capacity, brand, speed, and chips be used.

DC In Power Connector

Connect the DC power to this port. This port supports 12V/19V/24V power adapter of up to 150w. Note:

The DC power jack cannot be used with the 4-pin ATX 12V power connector simultaneously as a source

of power input.

USB 3.1 Gen 1 Port

The USB 3.1 Gen 1 port supports the USB 3.1 Gen 1 specication and is compatible to the USB 2.0

specication. Use this port for USB devices.

D-Sub Port

The D-Sub port supports a 15-pin D-Sub connector and supports a maximum resolution of 1920x1200@60 Hz

(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports D-Sub

connection to this port.

- 9 -

Line Out

The line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be used to

connect front speakers in a 4/5.1-channel audio conguration.

Mic In

The Mic in jack.

•When removing the cable connected to a back panel connector, rst remove the cable from

your device and then remove it from the motherboard.

•When removing the cable, pull it straight out from the connector. Do not rock it side to side to

prevent an electrical short inside the cable connector.

Please visit GIGABYTE's website for more software information.

Activity LEDConnection/

Speed LED

LAN Port Connection/Speed LED:

State Description

Orange 1 Gbps data rate

Green 100 Mbps data rate

Off 10 Mbps data rate

Activity LED:

State Description

Blinking Data transmission or receiving is occurring

Off No data transmission or receiving is occurring

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

HDMI Port

The HDMI port is HDCP compliant and supports Dolby TrueHD and DTS HD

Master Audio formats. It also supports up to 192KHz/24bit 7.1-channel LPCM

audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported

resolution is 3840x2160@30 Hz, but the actual resolutions supported are dependent on the monitor being

used.

After installing the HDMI device, make sure to set the default sound playback device to HDMI. (The

item name may differ depending on your operating system.)

Dual-DisplayCongurationsfortheOnboardGraphics:

Dual-display congurations are supported after you install motherboard drivers in OS.

- 10 -

Read the following guidelines before connecting external devices:

•First make sure your devices are compliant with the connectors you wish to connect.

•Before installing the devices, be sure to turn off the devices and your computer. Unplug the power

cord from the power outlet to prevent damage to the devices.

•After installing the device and before turning on the computer, make sure the device cable has

been securely attached to the connector on the motherboard.

1-6 Internal Connectors

1) ATX_12V

2) CPU_FAN

3) SYS_FAN

4) SATA3_0/1

5) SATA_PWR

6) BAT

7) BAT_CON

8) F_PANEL

9) VGA_CONN

10) LPT_GPIO

11) LPT_SEL

12) GPIO_PWRSEL

13) GPIO_SET

14) LVDS

15) BL_SW

16) LCD_VCC

17) MON_SW

18) FPD

19) FPD_PWR

20) DMIC_CON

21) F_AUDIO

22) SPKR

23) SPEAKER

24) FUSB20_1/FUSB20_2

25) COMA/COMB/COME/COMF

26) COMC/COMD

27) COMA/B/C/D/E/F_PW

28) CI

29) CLR_CMOS

30) SMBUS

31) I2C

32) M.2

33) BIOS_SET

25 26 25

27 33 12

145

1731

Tabla de contenidos

Otros manuales de Placa madre de Gigabyte

Gigabyte

Gigabyte 6VXDC7 Manual de usuario

Gigabyte

Gigabyte Z370M AORUS Gaming Manual de usuario

Gigabyte

Gigabyte H610M S2 DDR4 Manual de usuario

Gigabyte

Gigabyte GA-H67M-D2-B3 Manual de usuario

Gigabyte

Gigabyte Z590I VISION D Manual de usuario

Gigabyte

Gigabyte Network Device GA-7N400 Manual de usuario

Gigabyte

Gigabyte B560 HD3 Manual de usuario

Gigabyte

Gigabyte GA-A75M-DS2 Manual de usuario

Gigabyte

Gigabyte GA-M68MT-S2P Manual de usuario

Gigabyte

Gigabyte R112-X30 Manual de usuario

Gigabyte

Gigabyte GA-PH67A-UD3 Manual de usuario

Gigabyte

Gigabyte GA-8I865GM-775 Manual de usuario

Gigabyte

Gigabyte GA-MA69G-S3H Manual de usuario

Gigabyte

Gigabyte GA-Z87M-D3H Manual de usuario

Gigabyte

Gigabyte GA-8I915G-MFD Manual de usuario

Gigabyte

Gigabyte B560 DS3H AC Manual de usuario

Gigabyte

Gigabyte GA-8I865GME-775-RH Manual de usuario

Gigabyte

Gigabyte B760M D2HX SI DDR4 Manual de usuario

Gigabyte

Gigabyte GA-8N-SLI Pro Manual de usuario

Gigabyte

Gigabyte MX33-BS0 Manual de usuario

Gigabyte

Gigabyte GA-B250M-Gaming 3 Manual de usuario

Gigabyte

Gigabyte GA-Z97X-Gaming 3 Manual de usuario

Gigabyte

Gigabyte GA-M56S-S3 Manual de usuario

Gigabyte

Gigabyte GA-H67A-D3H-B3 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario