Gigabyte GA-IMB1900N Manual de usuario

To reduce the impacts on global warming, the packaging materials of this product

are recyclable and reusable. GIGABYTE works with you to protect the environment.

For more product details, please visit GIGABYTE's website.

GA-IMB1900N

User's Manual

Rev. 1001

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by

any means without GIGABYTE's prior written permission.

In order to assist in the use of this product, carefully read the User's Manual.

For product-related information, check on our website at: https://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0" means

the revision of the motherboard is 1.0. Check your motherboard revision before updating motherboard

BIOS, drivers, or when looking for technical information.

Example:

Motherboard

GA-IMB1900N

Nov. 08, 2019

Motherboard

GA-IMB1900N

- 3 -

Table of Contents

GA-IMB1900N Motherboard Layout................................................................................4

Chapter 1 Hardware Installation .....................................................................................5

1-1 Installation Precautions.................................................................................... 5

1-2 ProductSpecications...................................................................................... 6

1-3 Installing the Memory....................................................................................... 9

1-4 Installing an Expansion Card ........................................................................... 9

1-5 Back Panel Connectors.................................................................................. 10

1-6 Internal Connectors........................................................................................ 12

Chapter 2 BIOS Setup ..................................................................................................22

2-1 Startup Screen ............................................................................................... 22

2-2 Main ............................................................................................................... 23

2-3 Advanced ....................................................................................................... 24

2-4 Chipset........................................................................................................... 29

2-5 Security .......................................................................................................... 31

2-6 Boot................................................................................................................ 32

2-7 Save & Exit..................................................................................................... 34

Chapter 3 Appendix ......................................................................................................35

Drivers Installation..................................................................................................... 35

Regulatory Statements.............................................................................................. 36

Contact Us ................................................................................................................ 38

SATA2

1 0

- 4 -

GA-IMB1900N Motherboard Layout

* The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

Box Contents

5GA-IMB1900N motherboard

5Motherboard driver disc 5Two SATA cables

5User's Manual 5Two COM port cables

5I/O Shield 5One LPT port cable

KB_MS

CPU_FAN

COMC . COMD . COME . COMF

COMA_PW

CLR_CMOS COMF_PW

COMD_PW

COME_PW

COMC_PW

COMB_PW

GPIO_SET

GPIO_PWRSEL

LPT_SEL

LPT_GPIO SYS_FAN

ATX

GA-IMB1900N

F_AUDIO

AUDIO

SODIMM_2

SODIMM_1

BAT

ATX_12V

Intel®J1900

SoC

USB30_LAN1

USB30_LAN2

CODEC

VGA_CONN

M_BIOS

HDMI COMB

COMAVGA

PCIEX1

MINI_PCIE SPKR

iTE®

Super I/O

USB 2.0 Hub

F_PANEL

LVDS MON_SW

LCD_VCC

FPD

Intel®

GbE LAN

Intel®

GbE LAN

BUZZER

M2_WIFI

30M2A

F_USB1

F_USB2

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before connecting or unplugging the power supply cable from the motherboard, make sure

the power supply has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Do not place the computer system on an uneven surface.

•Do not place the computer system in a high-temperature or wet environment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

•If you use an adapter, extension power cable, or power strip, ensure to consult with its installation

and/or grounding instructions.

- 5 -

1-2 ProductSpecications

CPU Built in with an Intel®Celeron®Quad-Core J1900 SoC (2.42 GHz)

* Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage

to these components.

2 MB L2 Cache

Memory 2 x 1.35V DDR3L DIMM sockets supporting up to 8 GB of system memory

* If only one DDR3L memory module is to be installed, be sure to install it in the

SODIMM_1 socket.

Dual channel memory architecture

Support for DDR3L 1333 MHz memory modules

Support for non-ECC memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated in the SoC:

- 1 x D-Sub port, supporting a maximum resolution of 2560x1600@60 Hz

- 1 x HDMI port, supporting a maximum resolution of 1920x1200@60 Hz

Support for up to 2 displays at the same time

Audio Realtek®ALC887 codec

HighDenitionAudio

2/4/5.1/7.1-channel

* Tocongure7.1-channelaudio,youhavetouseanHDfrontpanelaudiomoduleand

enable the multi-channel audio feature through the audio driver.

LAN 2 x Intel®GbE LAN chips (10/100/1000 Mbit)

Expansion Slots 1 x PCI Express x1 slot

1 x full size Mini PCIe connector (MINI_PCIE)

* The MINI_PCIE connector can also be used as an MSATA connector.

(The PCI Express x1 slot and Mini PCIe connector conform to PCI Express 2.0

standard.)

1 x M.2 Socket 1 connector for the PCIe wireless communication module

(M2_WIFI)

Storage Interface Integrated in the SoC:

- 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe

x2 SSD support) (M2A)

- 2 x SATA 3Gb/s connectors

* Refer to "1-6 Internal Connectors," for the installation notices for the M.2 and SATA

connectors.

USB Integrated in the SoC:

- 4 x USB 3.0 ports on the back panel

SoC + USB 2.0 Hub:

- 4 x USB 2.0/1.1 ports available through the internal USB headers

- 6 -

Internal

Connectors

1 x 24-pin ATX main power connector

1 x 4-pin ATX 12V power connector

1 x CPU fan header

1 x system fan header

2 x SATA 3Gb/s connectors

1 x M.2 Socket 3 connector

1 x Mini PCIe connector

1 x front panel header

1 x front panel audio header

1 x battery power cable connector

2 x USB 2.0/1.1 headers

4 x serial port headers

6 x serial port power select jumpers

1 x D-Sub header

1 x LPT/GPIO header (LPT_GPIO)

1xGPIOstatuscongurationjumper(GPIO_SET)

1 x GPIO power selection jumper (GPIO_PWRSEL)

1xLPTcongurationjumper(LPT_SEL)

1 x LVDS header

1 x LVDS drive voltage jumper (LCD_VCC)

1xatpaneldisplayheader(FPD)

1xatpaneldisplayswitchheader(MON_SW)

1 x speaker header (SPKR)

1 x chassis intrusion header

1 x Clear CMOS jumper

Back Panel

Connectors

1 x PS/2 mouse port

1 x PS/2 keyboard port

2 x serial ports

1 x D-Sub port

1 x HDMI port

4 x USB 3.0 ports

2 x RJ-45 ports

2 x audio jacks

I/O Controller iTE®I/O Controller Chip

Hardware

Monitor

System voltage detection

Temperature detection

Fan speed detection

Fan speed control

* Whether the fan speed control function is supported will depend on the cooler you

install.

- 7 -

BIOS 1x64Mbitash

Use of licensed AMI UEFI BIOS

PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features Support for Xpress Install

Bundled

Software Norton®Internet Security (OEM version)

Operating

System

Support for Windows 10 64-bit

Support for Windows 7 32-bit/64-bit

* To install the LAN driver on Windows 7 32-bit, go to the Network\Intel folder in the

driver disc and execute the Autorun.exe program.

Form Factor Mini-ITX Form Factor; 17.0cm x 17.0cm

* GIGABYTEreservestherighttomakeanychangestotheproductspecicationsandproduct-relatedinformationwithout

prior notice.

Please visit GIGABYTE's website

for support lists of CPU, memory

modules, SSDs, and M.2 devices.

Please visit the Support\Utility List

page on GIGABYTE's website to

download the latest version of apps.

- 8 -

1-3 Installing the Memory

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the same

capacity, brand, speed, and chips be used.

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

•AccordingtoCPUspecications,ifonlyonememorymoduleistobeinstalled,besuretoinstall

it in the SODIMM_1 slot.

DualChannelMemoryConguration

This motherboard provides two memory sockets and supports Dual Channel Technology. After the memory

isinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.EnablingDual

Channel memory mode will double the original memory bandwidth.

The two memory sockets are divided into two channels and each channel has one memory socket as following:

Channel A: SODIMM_1

Channel B: SODIMM_2

Due to SoC limitations, read the following guidelines before installing the memory in Dual Channel mode.

1. Dual Channel mode cannot be enabled if only one memory module is installed.

2. When enabling Dual Channel mode with two memory modules, it is recommended that memory of

the same capacity, brand, speed, and chips be used.

Please visit GIGABYTE's website for details on hardware installation.

Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage to these

components.

1-4 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

•Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

•Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

- 9 -

1-5 Back Panel Connectors

PS/2 Keyboard Port and PS/2 Mouse Port

Use the upper port (green) to connect a PS/2 mouse and the lower port (purple) to connect a PS/2 keyboard.

Serial Port

Use the serial port to connect devices such as a mouse, modem or other peripherals.

D-Sub Port

The D-Sub port supports a 15-pin D-Sub connector and supports a maximum resolution of 2560x1600@60 Hz

(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports

D-Sub connection to this port.

HDMI Port

The HDMI port is HDCP compliant and supports Dolby TrueHD and DTS HD

Master Audio formats. It also supports up to 192KHz/24bit 8-channel LPCM audio

output. You can use this port to connect your HDMI-supported monitor. The maximum supported resolution

is 1920x1200@60 Hz, but the actual resolutions supported are dependent on the monitor being used.

After installing the HDMI device, make sure to set the default sound playback device to HDMI.

(The item name may differ depending on your operating system.)

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

•Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefrom

your device and then remove it from the motherboard.

•When removing the cable, pull it straight out from the connector. Do not rock it side to side to

prevent an electrical short inside the cable connector.

USB 3.0 Port

TheUSBportsupportstheUSB3.0/2.0specication.UsethisportforUSBdevices.

Activity LED

Connection/

Speed LED

LAN Port

Activity LED:

Connection/Speed LED:

State Description

Orange 1 Gbps data rate

Green 100 Mbps data rate

Off 10 Mbps data rate

State Description

Blinking Data transmission or receiving is occurring

On No data transmission or receiving is occurring

- 10 -

Tabla de contenidos

Otros manuales de Placa madre de Gigabyte

Gigabyte

Gigabyte GA-EX58-EXTREME Manual de usuario

Gigabyte

Gigabyte MW83-RP0 Manual de usuario

Gigabyte

Gigabyte GA-MA770-DS3 Manual de usuario

Gigabyte

Gigabyte GA-G41M-ES2L Manual de usuario

Gigabyte

Gigabyte H310 D3 2.0 Manual de usuario

Gigabyte

Gigabyte GA-6VA+ Manual de usuario

Gigabyte

Gigabyte H610M GAMING WIFI DDR4 Manual de usuario

Gigabyte

Gigabyte GA-H110N Manual de usuario

Gigabyte

Gigabyte GA-MA78GM-S2HP Manual de usuario

Gigabyte

Gigabyte 6BXS Manual de usuario

Gigabyte

Gigabyte GA-Z68XP-D3 Manual de usuario

Gigabyte

Gigabyte GA-X99-Gaming 5P Manual de usuario

Gigabyte

Gigabyte 6GXU Manual de usuario

Gigabyte

Gigabyte GA-8I915P-D Manual de usuario

Gigabyte

Gigabyte GA-7VCSV Manual de usuario

Gigabyte

Gigabyte GA-H170M-D3H-GSM Manual de usuario

Gigabyte

Gigabyte GA-965P-DS3P Manual de usuario

Gigabyte

Gigabyte B460 HD3 Manual de usuario

Gigabyte

Gigabyte H410M HD3P Manual de usuario

Gigabyte

Gigabyte R152-Z31 Manual de usuario

Gigabyte

Gigabyte GA-X99-UD3P Manual de usuario

Gigabyte

Gigabyte X299X AORUS XTREME WF Manual de usuario

Gigabyte

Gigabyte GA-MA770-DS3 Manual de usuario

Gigabyte

Gigabyte Z390 AORUS XTREME Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario