Gigabyte GA-C1037UN-L Manual de usuario

GA-C1037UN-L

User's Manual

Rev. 1001

12ME-C1037NL-1001R

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by

any means without GIGABYTE's prior written permission.

In order to assist in the use of this product, carefully read the User's Manual.

For product-related information, check on our website at: http://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0" means the

revision of the motherboard is 1.0. Check your motherboard revision before updating motherboard BIOS,

drivers, or when looking for technical information.

Example:

Motherboard

GA-C1037UN-L

Oct. 14, 2013

Motherboard

GA-C1037UN-L

Table of Contents

GA-C1037UN-L Motherboard Layout ..............................................................................4

GA-C1037UN-L Motherboard Block Diagram..................................................................5

Chapter 1 Hardware Installation .....................................................................................6

1-1 Installation Precautions.................................................................................... 6

1-2 ProductSpecications...................................................................................... 7

1-3 Installing the Memory....................................................................................... 9

1-4 Back Panel Connectors.................................................................................... 9

1-5 Internal Connectors........................................................................................ 11

Chapter 2 BIOS Setup ..................................................................................................17

2-1 Startup Screen ............................................................................................... 17

2-2 M.I.T. .............................................................................................................. 18

2-3 System Information ........................................................................................ 20

2-4 BIOS Features ............................................................................................... 21

2-5 Peripherals..................................................................................................... 24

2-6 Power Management....................................................................................... 26

2-7 Save & Exit..................................................................................................... 27

Chapter 3 Drivers Installation........................................................................................28

Regulatory Statements.............................................................................................. 29

Contact Us ................................................................................................................ 32

- 3 -

GA-C1037UN-L Motherboard Layout

Box Contents

5GA-C1037UN-L motherboard

5Motherboard driver disk 5Two SATA cables

5User's Manual 5I/O Shield

5One IDE cable

The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

- 4 -

KB_MS SYS_FAN

Intel®Celeron®1037U

AUDIO

DDR3_2

DDR3_1

BAT

ATX_12V

Intel®NM70

CODEC PCIe to PCI

Bridge

B_BIOS

M_BIOS

COM

iTE®

Super I/O

USB_LAN

GA-C1037UN-L

F_PANEL

F_USB1

F_USB2 SATA2 3 2

USB_HDMI

IDE

ATX

VGA

LPT

F_AUDIO

CLR_CMOS

SATA3

JMicron

JMB368

CPU_FAN

PCI

Realtek®

GbE LAN

SATA2 1

SPDIF_O

GA-C1037UN-L Motherboard Block Diagram

Fordetailedproductinformation/limitation(s),referto"1-2ProductSpecications."

Line-Out (Front Speaker Out)

MIC (Center/Subwoofer

Speaker Out)

Line-In (Rear Speaker Out)

PS/2 KB/Mouse

Intel®

Celeron®

1037U CPU

DMI

CPU CLK+/- (100 MHz)

Dual BIOS

DDR3 1600/1333 MHz

Dual Channel Memory

LPC Bus

LPT

Intel®NM70

8 USB 2.0/1.1

PCI Express Bus

PCIe CLK

(100 MHz)

COM

iTE®

Super

I/O

ATA-133/100/66/33

IDE Channel

JMicron JMB368

1 SATA 6Gb/s

LAN

RJ45

Realtek®

GbE LAN

D-Sub

HDMI

1 PCI

PCI CLK

(33 MHz)

PCIe to PCI

Bridge

3 SATA 3Gb/s

S/PDIF Out

CODEC

- 5 -

- 6 -

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before unplugging the power supply cable from the motherboard, make sure the power supply

has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Do not place the computer system on an uneven surface.

•Do not place the computer system in a high-temperature environment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

- 7 -

1-2 ProductSpecications

CPU Built in with an Intel®Dual-core Celeron®1037U processor (1.8 GHz)

* Do not disassemble the onboard CPU/chipset and the heatsinks/fan by yourself to

avoid damage to these components.

2 MB L3 cache

Chipset Intel®NM70 Chipset

Memory 2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory

* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than the size of

the physical memory installed.

Dual channel memory architecture

Support for DDR3 1600/1333 MHz memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated Graphics Processor:

- 1 x D-Sub port

- 1 x HDMI port, supporting a maximum resolution of 1920x1200

* Support for HDMI 1.4 version.

- Maximum shared memory of 1 GB

Audio Realtek®ALC887 codec

HighDenitionAudio

2/4/5.1/7.1-channel

 * Tocongure7.1-channelaudio,youhavetouseanHDfrontpanelaudiomodule

and enable the multi-channel audio feature through the audio driver.

LAN Realtek®GbE LAN chip (10/100/1000 Mbit)

Expansion Slots 1 x PCI slot

Storage Interface Chipset:

- 1 x SATA 6Gb/s connector (SATA3 0)

- 3 x SATA 3Gb/s connectors (SATA2 1~3)

JMicron JMB368 chip:

- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices

USB Chipset:

- 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through

the internal USB headers)

Internal

Connectors

1 x 24-pin ATX main power connector

1 x 4-pin ATX 12V power connector

1 x IDE connector

1 x SATA 6Gb/s connector

3 x SATA 3Gb/s connectors

1 x CPU fan header

1 x system fan header

1 x front panel header

1 x front panel audio header

1 x S/PDIF Out header

- 8 -

Internal

Connectors

2 x USB 2.0/1.1 headers

1 x Clear CMOS jumper

1 x chassis intrusion header

Back Panel

Connectors

1 x PS/2 keyboard port

1 x PS/2 mouse port

1 x D-Sub port

1 x parallel port

1 x serial port

1 x HDMI port

4 x USB 2.0/1.1 ports

1 x RJ-45 port

3 x audio jacks (Line In, Line Out, Mic In)

I/O Controller iTE®I/O Controller Chip

Hardware

Monitor

System voltage detection

CPU/System temperature detection

CPU/System fan speed detection

System fan speed control

* Whether the fan speed control function is supported will depend on the cooler you

install.

BIOS 2x32Mbitash

Use of licensed AMI EFI BIOS

Support for DualBIOS™

PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a

Unique Features Support for @BIOS

Support for Q-Flash

Support for Xpress Install

Support for EasyTune

* Available functions in EasyTune may differ by motherboard model.

Support for Smart Recovery 2

Support for Auto Green

Support for ON/OFF Charge

Bundled

Software

Norton®Internet Security (OEM version)

Intel®Smart Connect Technology

Operating

System Support for Windows 8.1/8/7/XP

Form Factor Mini-ITX Form Factor; 17.0cm x 17.0cm

* GIGABYTEreservestherighttomakeanychangestotheproductspecicationsandproduct-relatedinformationwithout

prior notice.

* Please visit the Support & Downloads\Utility page on GIGABYTE's website to check the supported operating system(s)

for the software listed in the "Unique Features" and "Bundled Software" columns.

- 9 -

1-3 Installing the Memory

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the same

capacity, brand, speed, and chips be used.

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

1-4 Back Panel Connectors

PS/2 Keyboard/Mouse Port

Use the upper port (green) to connect a PS/2 mouse and the lower port (purple) to connect a PS/2 keyboard.

Parallel Port

Use the parallel port to connect devices such as a printer, scanner and etc. The parallel port is also called

a printer port.

Serial Port

Use the serial port to connect devices such as a mouse, modem or other peripherals.

D-Sub Port

The D-Sub port supports a 15-pin D-Sub connector. Connect a monitor that supports D-Sub connection

to this port.

USB 2.0/1.1 Port

TheUSBportsupportsthe USB 2.0/1.1specication.UsethisportforUSB devices suchasaUSB

keyboard/mouse,USBprinter,USBashdriveandetc.

HDMI Port

The HDMI port is HDCP compliant and supports Dolby True HD and DTS HD

Master Audio formats. It also supports up to 192KHz/24bit 8-channel LPCM

audio output. You can use this port to connect your HDMI-supported monitor.

The maximum supported resolution is 1920x1200, but the actual resolutions supported are dependent

on the monitor being used.

After installing the HDMI device, make sure to set the default sound playback device to HDMI.

(The item name may differ from operating system.)

DualDisplayCongurationsfortheOnboardGraphics:

Dual-displaycongurationsaresupportedinoperatingsystemenvironmentonly,butnotduringtheBIOS

Setup or POST process.

- 10 -

Tocongure7.1-channelaudio,youhavetouseanHDfrontpanelaudiomoduleandenablethe

multi-channel audio feature through the audio driver.

Line In Jack (Blue)

The line out jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

LineOutJack(Green)

The line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be used to

connectfrontspeakersina4/5.1/7.1-channelaudioconguration.

Mic In Jack (Pink)

The default Mic in jack. Microphones must be connected to this jack.

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

•Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour

device and then remove it from the motherboard.

•When removing the cable, pull it straight out from the connector. Do not rock it side to side to

prevent an electrical short inside the cable connector.

Activity LED

Connection/

Speed LED

LAN Port

Connection/Speed LED:

State Description

Orange 1 Gbps data rate

Green 100 Mbps data rate

Off 10 Mbps data rate

Activity LED:

State Description

Blinking Data transmission or receiving is occurring

Off No data transmission or receiving is occurring

Tabla de contenidos

Otros manuales de Placa madre de Gigabyte

Gigabyte

Gigabyte TRX50 AERO D Manual de usuario

Gigabyte

Gigabyte B360M HD3 Manual de usuario

Gigabyte

Gigabyte GA-7VM400M-P Manual de usuario

Gigabyte

Gigabyte GA-X99-UD3 Manual de usuario

Gigabyte

Gigabyte X570 AORUS MASTER Manual de usuario

Gigabyte

Gigabyte GA-E350N-USB3 Manual de usuario

Gigabyte

Gigabyte 6EM Manual de usuario

Gigabyte

Gigabyte GA-890XA-UD3 Manual de usuario

Gigabyte

Gigabyte GA-7DXC Manual de usuario

Gigabyte

Gigabyte GA-Z77-D3H Manual de usuario

Gigabyte

Gigabyte R281-3C0 Manual de usuario

Gigabyte

Gigabyte GA-F2A85X-UP4 Manual de usuario

Gigabyte

Gigabyte GA-F2A55M-HD2 Manual de usuario

Gigabyte

Gigabyte B365M DS3H WIFI Manual de usuario

Gigabyte

Gigabyte 6OXM7E Series Manual de usuario

Gigabyte

Gigabyte R152-Z31 Manual de usuario

Gigabyte

Gigabyte GA-IMB410M Manual de usuario

Gigabyte

Gigabyte GA-8N-SLI Royal Manual de usuario

Gigabyte

Gigabyte GA-8I865PEM-775 Manual de usuario

Gigabyte

Gigabyte 5AX Manual de usuario

Gigabyte

Gigabyte GA-8GEMT4 Series Manual de usuario

Gigabyte

Gigabyte GA-8S650GXM Series Manual de usuario

Gigabyte

Gigabyte 8S648FXP-RZ Manual de usuario

Gigabyte

Gigabyte B550M GAMING Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario