Gigabyte GA-970A-DS3 Manual de usuario

GA-970A-DS3

User's Manual

Rev. 1001

12ME-970ADS3-1001R

Motherboard

GA-970A-DS3

Jan. 20, 2012

Motherboard

GA-970A-DS3

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without prior

notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in

any form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of documentations:

For quick set-up of the product, read the Quick Installation Guide included with the product.

For detailed product information, carefully read the User's Manual.

For product-related information, check on our website at:

http://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0"

means the revision of the motherboard is 1.0. Check your motherboard revision before updating

motherboard BIOS, drivers, or when looking for technical information.

Example:

- 4 -

Table of Contents

GA-970A-DS3 Motherboard Layout ................................................................................5

GA-970A-DS3 Motherboard Block Diagram....................................................................6

Chapter 1 Hardware Installation .....................................................................................7

1-1 Installation Precautions.................................................................................... 7

1-2 Product Specications...................................................................................... 8

1-3 Installing the CPU .......................................................................................... 10

1-4 Installing the Memory..................................................................................... 11

1-5 Installing an Expansion Card ......................................................................... 11

1-6 Back Panel Connectors.................................................................................. 12

1-7 Internal Connectors........................................................................................ 13

Chapter 2 BIOS Setup ..................................................................................................20

2-1 Startup Screen ............................................................................................... 20

2-2 The Main Menu .............................................................................................. 21

2-3 MB Intelligent Tweaker(M.I.T.)........................................................................ 22

2-4 Standard CMOS Features.............................................................................. 27

2-5 Advanced BIOS Features .............................................................................. 28

2-6 Integrated Peripherals.................................................................................... 30

2-7 Power Management Setup............................................................................. 32

2-8 PC Health Status............................................................................................ 34

2-9 Load Fail-Safe Defaults.................................................................................. 35

2-10 Load Optimized Defaults................................................................................ 35

2-11 Set Supervisor/User Password ...................................................................... 36

2-12 Save & Exit Setup .......................................................................................... 36

2-13 Exit Without Saving........................................................................................ 37

Chapter 3 Drivers Installation........................................................................................37

Chapter 4 Appendix ......................................................................................................38

4-1 Conguring SATA Hard Drive(s)..................................................................... 38

4-2 Regulatory Statements................................................................................... 40

- 5 -

GA-970A-DS3 Motherboard Layout

KB_MS CPU_FAN

Socket AM3+

ATX

GA-970A-DS3

F_AUDIO

AUDIO

PCIEX4

DDR3_4

DDR3_3

DDR3_2

DDR3_1

BAT

F_PANELF_USB2

F_USB3

SYS_FAN2

SPDIF_O

ATX_12V

AMD 970

AMD SB950

SATA3

0 2 4

1 3 5

PCI1

PCI2

R_USB2

R_USB1

R_USB30

CODEC

PWR_FAN

SYS_FAN1

PCIEX1_2

PCIEX1_1 (Note)

USB_LAN

PCIEX16

PCIEX1_3

F_USB1

M_BIOS

B_BIOS

CLR_CMOS

Realtek

GbE LAN

Etron

EJ168

iTE

IT8728

(Note) Due to a hardware limitation, the PCIEX1_1 slot can only accommodate a shorter PCI Express x1

expansion card. For a longer expansion card, use other expansion slots.

* The box contents above are for reference only and the actual items shall depend on the product package you obtain.

Box Contents

GA-970A-DS3 motherboard5

Motherboard driver disk5Two SATA cables5

User's Manual5I/O Shield5

- 6 -

GA-970A-DS3 Motherboard Block Diagram

AMD 970

CPU CLK+/- (200 MHz)

Dual Channel Memory

PCI Bus

AM3+/AM3 CPU

2 PCI

PCI CLK

(33 MHz)

DDR3 2000 (O.C.)/1866/1600/

1333/1066 MHz

iTE

IT8728

LPC

Bus

PS/2 KB/Mouse

Dual BIOS

12 USB 2.0/1.1

6 SATA 6Gb/s

AMD SB950

PCI Express Bus

PCIe CLK

(100 MHz)

PCIe CLK

(100 MHz)

1 PCI Express x16

x16

x1 x1 x1

3 PCI Express x1

1 PCI Express x4

LAN

RJ45

Realtek

GbE LAN PCIe CLK

(100 MHz)

2 USB 3.0/2.0

Etron

EJ168

Hyper Transport Bus

PCI Express Bus

Line Out (Front Speaker Out)

MIC (Center/Subwoofer Speaker Out)

Line In (Rear Speaker Out)

S/PDIF Out

CODEC

- 7 -

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's

manual and follow these procedures:

Prior to installation, make sure the chassis is suitable for the motherboard.•

Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or warranty•

sticker provided by your dealer. These stickers are required for warranty validation.

Always remove the AC power by unplugging the power cord from the power outlet before•

installing or removing the motherboard or other hardware components.

When connecting hardware components to the internal connectors on the motherboard, make•

sure they are connected tightly and securely.

When handling the motherboard, avoid touching any metal leads or connectors.•

It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic•

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keep your hands dry and rst touch a metal object to eliminate static electricity.

Prior to installing the motherboard, please have it on top of an antistatic pad or within an•

electrostatic shielding container.

Before unplugging the power supply cable from the motherboard, make sure the power supply•

has been turned off.

Before turning on the power, make sure the power supply voltage has been set according to•

the local voltage standard.

Before using the product, please verify that all cables and power connectors of your hardware•

components are connected.

To prevent damage to the motherboard, do not allow screws to come in contact with the•

motherboard circuit or its components.

Make sure there are no leftover screws or metal components placed on the motherboard or•

within the computer casing.

Do not place the computer system on an uneven surface.•

Do not place the computer system in a high-temperature environment.•

Turning on the computer power during the installation process can lead to damage to system•

components as well as physical harm to the user.

If you are uncertain about any installation steps or have a problem related to the use of the•

product, please consult a certied computer technician.

Chapter 1 Hardware Installation

- 8 -

1-2 Product Specications

CPU AM3+ Socket:

- AMD AM3+ FX processors

- AMD AM3 Phenom™II processor/ AMD Athlon™II processor

(Go to GIGABYTE's website for the latest CPU support list.)

Hyper Transport

Bus 4800 MT/s

Chipset North Bridge: AMD 970

South Bridge: AMD SB950

Memory 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory

* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than 4 GB.

Dual channel memory architecture

Support for DDR3 2000(O.C.)/1866/1600/1333/1066 MHz memory modules

* To support a DDR3 1866 MHz (and above) memory, you must install an AM3+ CPU

rst.

(Go to GIGABYTE's website for the latest supported memory speeds and

memory modules.)

Audio Realtek HD audio codec

High Denition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN Realtek GbE LAN chip (10/100/1000 Mbit)

Expansion Slots 1 x PCI Express x16 slot, running at x16 (PCIEX16)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

1 x PCI Express x16 slot, running at x4 (PCIEX4)

3 x PCI Express x1 slots

(All PCI Express slots conform to the PCI Express 2.0 standard.)

2 x PCI slots

Storage Interface South Bridge:

- 6 x SATA 6Gb/s connectors supporting up to 6 SATA 6Gb/s devices

- Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD

USB South Bridge:

- Up to 12 USB 2.0/1.1 ports (6 ports on the back panel, 6 ports available

through the internal USB headers)

Etron EJ168 chip:

- Up to 2 USB 3.0/2.0 ports on the back panel

Internal

Connectors

1 x 24-pin ATX main power connector

1 x 4-pin ATX 12V power connector

6 x SATA 6Gb/s connectors

1 x CPU fan header

2 x system fan headers

1 x power fan header

1 x front panel header

- 9 -

Internal

Connectors

1 x front panel audio header

1 x S/PDIF Out header

3 x USB 2.0/1.1 headers

1 x Clear CMOS jumper

Back Panel

Connectors

1 x PS/2 keyboard/mouse port

6 x USB 2.0/1.1 ports

2 x USB 3.0/2.0 ports

1 x RJ-45 port

3 x audio jacks (Line In/Line Out/Microphone)

I/O Controller iTE IT8728 chip

Hardware

Monitor

System voltage detection

CPU/System temperature detection

CPU/System/Power fan speed detection

CPU overheating warning

CPU/System/Power fan fail warning

CPU/System fan speed control

* Whether the CPU/system fan speed control function is supported will depend on

the CPU/system cooler you install.

BIOS 2 x 32 Mbit ash

Use of licensed AWARD BIOS

Support for DualBIOS™

PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b

Unique Features Support for @BIOS

Support for Q-Flash

Support for Download Center

Support for Xpress Install

Support for Xpress Recovery2

Support for EasyTune

* Available functions in EasyTune may differ by motherboard model.

Support for Turbo XHD

Support for Smart Recovery

Support for Auto Green

Support for ON/OFF Charge

Support for 3TB+ Unlock

Support for Q-Share

Bundled

Software Norton Internet Security (OEM version)

Operating

System Support for Microsoft®Windows 7/Vista/XP

Form Factor ATX Form Factor; 30.5cm x 22.5cm

* GIGABYTE reserves the right to make any changes to the product specications and product-related information

without prior notice.

- 10 -

1-3 Installing the CPU

Installing the CPU

A. Locate the pin one (denoted by a small triangle) of the CPU socket and the CPU.

Read the following guidelines before you begin to install the CPU:

Make sure that the motherboard supports the CPU.•

(Go to GIGABYTE's website for the latest CPU support list.)

Always turn off the computer and unplug the power cord from the power outlet before installing the•

CPU to prevent hardware damage.

Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly.•

Apply an even and thin layer of thermal grease on the surface of the CPU.•

Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage•

of the CPU may occur.

Set the CPU host frequency in accordance with the CPU specications. It is not recommended •

that the system bus frequency be set beyond hardware specications since it does not meet the

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications, please do so according to your hardware specications including the CPU, graphics

card, memory, hard drive, etc.

AM3+/AM3 CPU

A Small Triangle Marking

Denotes CPU Pin One

AM3+ Socket

A Small Triangle Mark

Denotes Pin One of

the Socket

Tabla de contenidos

Otros manuales de Placa madre de Gigabyte

Gigabyte

Gigabyte MZ31-AR0 Manual de usuario

Gigabyte

Gigabyte GA-8IDXR-A Manual de usuario

Gigabyte

Gigabyte GA-870A-UD3 Manual de usuario

Gigabyte

Gigabyte R280-F2O Manual de usuario

Gigabyte

Gigabyte GA-G31M-ES2L Manual de usuario

Gigabyte

Gigabyte GA-E2100N Manual de usuario

Gigabyte

Gigabyte H610M H DDR4 Manual de usuario

Gigabyte

Gigabyte GA-IMB4005TN-M Manual de usuario

Gigabyte

Gigabyte GA-970A-D3P Manual de usuario

Gigabyte

Gigabyte GA-H110M-H Manual de usuario

Gigabyte

Gigabyte GA-7PESVL Manual de usuario

Gigabyte

Gigabyte GA-7N400E Manual de usuario

Gigabyte

Gigabyte A320M HD3 Manual de usuario

Gigabyte

Gigabyte GA-586T2 Manual de usuario

Gigabyte

Gigabyte GA-X150-PLUS WS Manual de usuario

Gigabyte

Gigabyte GA-H61M-S2PV Manual de usuario

Gigabyte

Gigabyte GA-X58A-UD9 Manual de usuario

Gigabyte

Gigabyte B560M DS3H V3 Manual de usuario

Gigabyte

Gigabyte GA-8I845GVM775 Manual de usuario

Gigabyte

Gigabyte GA-7VM400M Manual de usuario

Gigabyte

Gigabyte Network Device GA-7N400 Manual de usuario

Gigabyte

Gigabyte GA-8I945GMMFY-RH Manual de usuario

Gigabyte

Gigabyte GA-945GME-DS2 Manual de usuario

Gigabyte

Gigabyte B560M AORUS PRO AX Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario