Giant Turbo-Laser 22700 Series Guía de configuración
Series
22700
Turbo Nozzle
Operating Conditions
U.S. Metric
Max. Pressure:.........................3000 PSI....... 200 bar
Maximum Temperature: ..........195 °F ............ 100 °C
Weight: .....................................1.4 lbs.............. 635 g
Inlet:........................................................... 1/4" BSPP
Spray Angle: .........................................................25°
Parts List
Item Part# Description Quantity
1 06342 Discharge Casing 1
12 06341 Rubber Cap 1
Note: Item numbers 2-10 are sold in kits
WARNING
HIGH PRESSURE
DO NOT POINT
AT INDIVIDUAL
MAY CAUSE
SERIOUS INJURY!
Model # Nozzle Size Repair Kit*
22700-20 #2.0 09470-20
22700-25 #2.5 09470-25
22700-30 #3.0 09470-30
22700-35 #3.5 09470-35
22700-40 #4.0 09470-40
22700-45 #4.5 09470-45
22700-50 #5.0 09470-50
22700-55 #5.5 09470-55
22700-60 #6.0 09470-60
*Kit includes items 2-11
MAINTENANCE NOTICE:
If turbo will not spin, take unit apart and clean the nozzle.
If turbo still will not spin, have an authorized distributor repair nozzle.
Turbo Laser Repair Instructions
1) Remove the rubber cap (12) from the discharge casing (1).
2) Using a 27mm boxed end wrench unscrew drive plug (11) from discharge casing
(1).
3) Using a wooden dowel press out (2-9) from the top side of discharge casing (1).
4) Replaceitems2-10withpartsfromkit.Makesureitem8rstintothetabofitem2.
5) Replace rubber cap (12). Tighten drive plug (11) into discharge casing (1). Softly
shake assembly to ensure the parts freely move (see diagram below).
Turbo Laser Operating Instructions
Warning: Never put your hand in the rotating water blast. Always wear eye
protection. Never aim the blast at people or animals. Never aim the blast at live
electical appliances.
WARNING: This product might contain a chemical known to the State of California to
cause cancer, and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
Giant Industries, Inc.
900 N. Westwood Ave.
Toledo, Ohio 43607
PHONE: 419-531-4600
FAX: 419-531-6836
www.giantpumps.com
© Copyright 2021 Giant Industries, Inc.
01/21 22700.INDD
Correct Rotor Position Incorrect Rotor Position
Este manual sirve para los siguientes modelos
1
Otros manuales de Herramientas de Giant
