Giada VM23 Manual de usuario

-1-

- 2 -
Statement
The copyright of this manual belongs to Shenzhen JEHE Technology Development Co., Ltd.
(Giada, JEHE’s global brand) and all rights are reserved. The company reserves the right to
change this manual at any time without notification. Specifications here are for reference only,
please take the real product as standard.
Without official authorization of Giada, other companies or individuals may not copy,
plagiarize, translate or disseminate this manual for commercial purpose.
The information provided in this manual is accurate and reliable. The company does not take
any legal responsibility for the consequences of infringement use of this manual.
Safety Notice
• Read the user manual carefully before setting up the Giada product.
• Disconnect the power cord before installing the internal components
• Most electronic components are sensitive to static electrical charge, please wear a
wrist-grounding strap when installing the internal components.
• Don’t disconnect the power cord when the system is running to avoid damage to the
sensitive components by instantaneous surge voltage.
Contact Information
Shenzhen JEHE Technology Development Co., Ltd.
Website: www.giadatech.com
Phone: +86-755-3330 0336
Email: support@giadatech.com
Address: 1~3/F, Block A, Tsinghua Information Harbor, North Section, Shenzhen Hi-tech
Park, Nanshan District, Shenzhen, China

Table of Contents
1. Product Introduction ........................................................................................ 5
2. Interface Description and Hardware Specifications ...................................... 5
2.1 Interface Description .................................................................................... 5
2.2 Hardware Specifications ............................................................................... 6
3. Accessories Installation Steps ........................................................................... 7
3.1 WIFI(M.2) Installation ................................................................................... 7
3.2 MSATA Installation ........................................................................................ 8
4. BIOS Setup ........................................................................................................ 9
4.1 Main(Standard CMOS) Setup ..................................................................... 12
4.2 Advanced (Advanced BIOS setup) ............................................................. 13
4.2.1 Trusted Computing ............................................................................. 13
4.2.2 ACPI Settings ..................................................................................... 14
4.2.3 Super IO Hardware Monitor .............................................................. 15
4.2.4 Wake Configuration ........................................................................... 16
4.2.5 CPU Configuration ............................................................................. 17
4.2.5.1 Socket 0 CPU Information ...................................................... 18
4.2.5.1 Socket 0 CPU Information ...................................................... 19
4.2.6 AMI Graphic Output Protocol Policy ................................................ 20
4.2.7 Network Stack Configuration ............................................................ 21
4.2.8 CSM Configuration ............................................................................ 23

4.2.9 NVME Configuration ............................................................................. 24
4.2.10 SDIO Configuration ............................................................................. 25
4.3 Chipset ............................................................................................................. 26
4.3.1 North Bridge ........................................................................................... 26
4.3.2 South Bridge ........................................................................................... 27
4.3.3 South Cluster Configuration .................................................................. 28
4.3.3.1 SATA Drivers Configuration ....................................................... 28
4.3.3.2 Miscellaneous Configuration ...................................................... 30
4.4 Security ..................................................................................................... 31
4.5 Boot Menu ................................................................................................ 32
4.6 Save & Exit ............................................................................................... 33
5. JAHC Introduction ......................................................................................... 34
5.1 How to set up Auto power on function ..................................................... 34
5.2 JAHC software .......................................................................................... 36
5.2.1 JAHC software functions ............................................................... 36
5.2.2 JAHC software installation guide .................................................. 36
5.2.3 Startup & shutdown time setup ...................................................... 40
5.3 Watchdog API and instruction ................................................................... 41

- 5 -
1. Product Introduction
Based on Intel®Apollo Lake, Giada VM23 adopts fanless design, onboard 2G or 4G
memory, onboard Emmc storage. With one DP and one HDMI display outputs, it
supports 4K resolution. The player is suitable to be applied in entry-level or middle
range digital signage applications.
2. Interface Description and Hardware Specifications
2.1 Interface Description
Front I/O Port
Rear I/O Port

- 6 -
2.2 Hardware Specifications
VM23
VM23-F1-N335031E5G-GIA
VM23-F2-N345032E5G-GIA
Processor
CPU
Intel®Celeron N3350/N3450
Frequency
1.10GHz (Up to 2.40GHz)/1.10GHz (Up to 2.20GHz)
BIOS
AMI Source Code
Chipset
SOC
Memory
Type
DDR3L-1866MHz
Socket
Onboard
Capacity
2GB/4GB
Graphics
GPU
Intel®HD Graphic engine
Graphic Engine
Direct X12.0, OpenGL4.3, OpenCL2.0
DP
1 x DP(Max.4096 x 2304@60Hz)
HDMI1.4
1 x HDMI(Max.3840 x 2160@30Hz)
Network
Controller
Realtek RTL8111H Gigabit Ethernet
Interface
1 x RJ45
I/O Interface
USB
2 x USB 3.0, 2 x USB 2.0
Serial Port
1 x RS232
Audio
1 x MIC_IN,1x Audio OUT
Mini PCIe
1 x Full-size Mini-PCIe for mSATA
M.2 (2230)
1 x M.2(2230)for WiFi/BT
Storage
mSATA
1 x Full-size mSATA
eMMC
Onboard 32GB eMMC
JAHC
JAHC
Watchdog / Auto power on/IR Remote Control / RTC/Wake On Lan
Operation
System
OS
Windows 10(64-bit) / Linux
Power
Power Type
DC-IN
Input Voltage
12V/2A
Mechanical
Construction
Metal
Mounting
Desk/VESA Mounting(JC530)
Dimension
(W x D x H)
116.6mm x 107.4mm x 30 mm
Color
Black
Environment
Operating
Temperature
0-40℃at 0.7m/s Air Flow
Relative Humidity
95%@40℃(non-condensing)
Certification
CE/FCC

- 7 -
3. Accessories Installation Steps
For safety reasons, please ensure that the power cord is disconnected before opening the case.
How to open the top cover and bottom cover
Unscrew the four screws and remove the bottom cover. (M.2 slot for WIFI and mini PCIE slot for
MSATA are on this side)
3.1 WIFI (M.2) Installation
1. Plug the WIFI module into the appropriate slot.
2. Secure the module to the carrier by tightening up the screw.
3. Connect the black cable to Main and grey cable to AUX. Install the antenna.

- 8 -
3.2 MSATA Installation
1. Plug the SSD (MSATA) module into the mini PCIE slot.
2. Secure the module to the carrier by tightening up the screw.

- 9 -
4. BIOS Setup
Notice:
The descriptions relating to BIOS setup in this Manual is for reference only since the BIOS version
of the product might be upgraded. Giada provides no guarantee that all the contents in this Manual
are consistent with the information you acquired.
BIOS is a basic I/O control program saved in the Flash Memory. Bridging the motherboard and the
operation system, BIOS is used for managing the setup of the related parameters between them.
When the computer is activated, the system is first controlled by the BIOS program. Firstly, a
self-detection called POST is performed to check all hard devices and confirm the parameters of the
synchronous hardware.
Once all detections are completed, BIOS will hand over the controlling to the operation system (OS).
As BIOS serves as the only channel that connects the hardware and software, whether your computer
can run stably and work in optimized state will hinge on how to properly set the parameters in BIOS.
Therefore, the correct setup of BIOS plays a key role in stably running the system and optimizing its
performance.
The CMOS Setup will save the set parameters in the built-in CMOS SRAM on the motherboard.
When the power is shut off, the lithium battery on the motherboard will provide continuously power
to CMOS SRAM.
The BIOS setup program will allow you to configure the following items:
1. HD drive and peripheral devices
2. Video display type and display items
3. Password protection
4. Power management characteristics
A. State of BIOS Setup
When the computer is started up, BIOS will run the self-detection (Post) program. This program includes
series of diagnosis fixed in BIOS. When this program is executed, the following information will appear if any
error is found:
Press [F1] to Run General help
Press [F2] to Load previous values and continue
To enter BIOS, you can press F2; to load the default values and enter the system, you can press DEL to enter
the BIOS interface if no error occurs. If the indicative information disappears before operating, you can shut
down the computer and turn it on again, or you can press the RESET key on the product case. To restart your
computer, you can also press < Ctrl > + < Alt > + < Delete > simultaneously.

- 10 -
B. Function Keys definitions
Hot Key
Description
↑
(Up key) Move to the previous item
↓
(Down key) Move to the next item
←
(Left key) Move to the left item
→
(Right key) Move to the right item
ESC
Exit the current interface
Page Up
Change the setup state, or add the values
Page Down
Change the setup state, or deduct the values
F1
Display the information of the current function Keys definitions.
F9
Load the optimized values
F10
Save the settings and exit the CMOS SETUP
C. Auxiliary information Main interface
When the system enters the main interface of Setup, the major selected contents will be displayed at
the lower part of the interface with the change of the setting options.
When you set the value for each column, you can view the preset value of the column and the values
that can be set if you press F2, for example, the BIOS default values or CMOS Setup values.
To exit the interface for auxiliary information, press [ESC].
1) Main menu
When the system enters the CMOS Setup menu, you can see the main menu on the upper part of the screen, as
shown in Figure1.
In this main menu, you can use the left and right direction keys to select the setup items.
Once the item is selected, the lower part of the computer screen will show the details of setting.
Tabla de contenidos
Otros manuales de Reproductor multimedia de Giada

Giada
Giada G1568 Manual de usuario

Giada
Giada AE613 Manual de usuario

Giada
Giada VM27 Manual de usuario

Giada
Giada DK310 Manual de usuario

Giada
Giada DF612 Manual de usuario

Giada
Giada DN73 Manual de usuario

Giada
Giada PC68 Manual de usuario

Giada
Giada DN76 Manual de usuario

Giada
Giada D613 Manual de usuario

Giada
Giada F108D Manual de usuario
























