getAir SmartFan Manual de usuario
SmartFan
Installation and operating instructions
v 1.2_08/2016 EN
getAir GmbH & Co. KG
Krefelder Straße 670 | D-41066 Mönchengladbach
T +49 2161 990 950 | F +49 2161 990 959 9
info@getair.eu | www.getair.eu
All rights reserved.
These instructions have been compiled with the greatest care. Nevertheless, the publisher will accept
no liability for any damage resulting from missing or incorrect details therein. We reserve the right to
make partial or entire changes to these instructions without prior announcement.
All information contained in these documents is the property of getAir GmbH & Co. KG. Any publishing
thereof, whether in part or in whole, requires the written consent of getAir GmbH & Co. KG. Copying
the instructions within the same company for the purpose of evaluating the product or for other
product-related uses is permitted and not subject to prior approval.
© 2016 getAir GmbH & Co. KG
2SmartFan EN
3
EN SmartFan
Table of content
1 General remarks..........................................................................................................................4
2 System overview.........................................................................................................................6
2.1 Functioning .......................................................................................................................... 6
3 Installation preparations............................................................................................................8
3.1 SmartFan components......................................................................................................8
3.2 TOUCH control unit components ....................................................................................9
3.3 LED control unit components...........................................................................................9
3.4 Dimensions ........................................................................................................................10
3.5 Required tools....................................................................................................................10
3.6 Positioning..........................................................................................................................11
4 Electrical installation ................................................................................................................12
4.1 Installation recommendations for the control unit.....................................................13
4.2 Connection and wiring .....................................................................................................14
4.3 Setting the DIP switch......................................................................................................15
5 Installation..................................................................................................................................16
5.1 Making the hole in the wall .............................................................................................16
5.1.1 Use of a prefabricated installation block..........................................................16
5.1.2 Core-drilling a hole through the wall..................................................................17
5.2 Inserting the mounting tube ...........................................................................................18
5.3 Cabling ................................................................................................................................19
5.4 Installing the outside cover.............................................................................................19
5.5 Installing the heat exchanger unit..................................................................................20
5.6 Installing the fan unit........................................................................................................20
5.7 Inserting the inside cover ................................................................................................21
6 Operating the system...............................................................................................................22
6.1 SmartFan............................................................................................................................22
6.1.1 Shutting the inside cover.....................................................................................22
6.1.2 Opening the inside cover .....................................................................................23
6.2 TOUCH control unit...........................................................................................................24
6.2.1 Control screens .....................................................................................................24
6.2.2 System set-up........................................................................................................25
6.2.3 Operating modes and functions.........................................................................26
6.2.4 Further functions...................................................................................................27
6.3 LED control unit.................................................................................................................28
6.3.1 Controls...................................................................................................................28
6.3.2 Operating modes...................................................................................................28
6.3.3 Further functions...................................................................................................29
7 Cleaning and maintenance .....................................................................................................30
7.1 Maintenance interval........................................................................................................30
7.2 Maintenance instructions................................................................................................31
7.2.1 Filter maintenance................................................................................................31
7.2.2 Fan unit maintenance...........................................................................................32
7.2.3 Heat exchanger maintenance ............................................................................33
8 Troubleshooting ........................................................................................................................34
9 Disposal ......................................................................................................................................36
10 Technical data ..........................................................................................................................37
11 Energyefciencylabelandproductinformationsheet..........................................................39
12 Warranty .....................................................................................................................................43
13 Attachment.................................................................................................................................45
Though its contents have been checked for consistency with the described hard- and soft-
ware, deviations cannot be ruled out, meaning that no guarantee of complete consistency
can be given.
This documentation is updated on a regular basis. Necessary corrections and useful ad-
denda will always be included in subsequent versions.
They are also available at www.getair.eu.
4SmartFan EN
1 General remarks
1.1 Usage
The SmartFan is intended for use in the controlled ventilation of rooms in houses, apart-
ments,hotels, ofceandpublicbuildings.Itcanbe installedeither innew buildingsorin
existing buildings undergoing refurbishment and/or modernisation. SmartFan usage is
authorised solely in accordance with the described use cases and only in association with
components recommended by getAir GmbH & Co. KG and listed in this document. Other
SmartFan usages are not permitted. The system is unsuitable for extracting smoke or drying
buildings, for rooms containing aggressive and/or caustic gases or extreme levels of dust.
To guarantee the fault-free and safe use of the system, it is vital to ensure appropriate trans-
port and storage, professional planning and installation, as well as proper operation and
maintenance.Modicationsandrecongurationsoftheunit/systemarenotpermitted.
Before starting installation, the project needs to have been planned properly, detailing the
number and positioning of the ventilation units and their associated controls, and the venti-
lation principle applied (cross-ventilation, single room ventilation, air extraction).
Duringplanning,installationandoperation,allrelevantrequirements,buildingandreprotec-
tion regulations and accident prevention regulations are to be complied with. In the planning
phase, details need to be checked with the respective chimney sweep or ventilation expert.
5
EN SmartFan
1.2 Safety information
Attention is to be paid to the safety information contained in these instructions for instal-
ling and operating the control unit. Before any work is carried out on the unit / system, the
instructions and safety information are to be read carefully in full. Non-compliance with
the safety information can lead to harm/damage to persons and/or equipment.
Assembly, electrical installation and system start-up should only be performed by skilled
persons.Thesearepeoplewithrelevantsafetytrainingandqualiedtoinstall,commission
and label equipment, systems and cabling in accordance with current safety standards.
The following list contains descriptions of the symbols and terms used in these instructions:
Hazard symbol
Caution This hazard symbol warns about
the danger of injury.
Electricity This hazard symbol warns about
the danger of electrocution.
Warning symbol Please note This warning symbol indicates
important information.
6SmartFan EN
2 System overview
The SmartFan consists of acoustically optimised designer covers for inside (1) and out-
side(2)allowinganoptimalairow,alterunit(3),afanunit(4),aheatexchangerunit
(5) and an mounting tube (6). The SmartFan is always installed in an outside wall. The
mounting tube into which the fan and heat exchanger units are inserted is sealed inside
thewall.Theinsideandoutsidecoverscanbe ttedwithouttools.Theyconstitutethe
nishingelementsofthesystemandensureoptimalairow,therebyguaranteeingmore
efcientventilation.
2.1 Functioning
Wherever possible, SmartFans should be operated in pairs, i.e. with one unit blowing in
fresh air and the other expelling spent air. The units change direction concurrently after
50 - 70 seconds (depending on the selected fan speed). This allows a room to be properly
aired,balancingairinowandoutowinaccordancewithDIN1946-6.Theintegratedheat
exchangerextractsandstoresheatfromtheoutowingair.Whenthedirectionchanges
andfreshairissuckedin,itiswarmedbyowingovertheheatexchanger.Indoingso,the
SmartFan achieves a heat recovery rate of 91%.
1
3
4
5
6
2
7
EN SmartFan
Example of optimal ventilation
TO ENSURE PROPER VENTILATION THROUGHOUT A BUILDING (I.E. NOT JUST IN
ONE ROOM) IT IS IMPORTANT TO FORESEE FURTHER SUITABLE VENTILATION
OPENINGS, FOR INSTANCE SPACE UNDER DOORS (CA. 15 - 20 MM) OR THE
USE OF VENTILATION GRILLES.
Example for wet rooms
GENERALLY SPEAKING, WET ROOMS REQUIRE (1) TWO UNITS TO BE INSTALLED,
AND (2) PRECAUTIONS TO BE TAKEN THAT WET ROOM AIR DOES NOT MIX WITH
THE AIR OF OTHER ROOMS. THIS SYSTEM IS NOT SUITABLE FOR WET ROOMS
WITH NO OUTSIDE WALL.
WC
BATHROOM
8SmartFan EN
3 Installation preparations
Before starting installation, please check that all components are present, as otherwise it
will not be possible to complete the installation.
3.1 SmartFan components
Article name Item Content Numbers
Full SmartFan set
1SmartFaninsidecover+dustlter 1
2 SmartFan outside cover 1
3 SmartFan fan unit 1
4 SmartFan heat exchanger unit 1
5 Mounting tube 500 mm 1
6 Plastering covers 2
7 SmartFan cap for the inside cover 1
Article name Item Content Numbers
SmartFan
building shell set
2 SmartFan outside cover 1
5 Mounting tube 500 mm 1
6 Plastering covers 2
Article name Item Content Numbers
SmartFan
nishing set
1SmartFaninsidecover+dustlter 1
3 SmartFan fan unit 1
4 SmartFan heat exchanger unit 1
7 SmartFan cap for the inside cover 1
7
1
3
2
9
EN SmartFan
3.2 TOUCH control unit components
Article name Item Content Numbers
TOUCH control unit
1 TOUCH control screen 1
2 Frame 1
3 Control base 1
3.3 LED control unit components
Article name Item Content Numbers
LED control unit
1 LED control panel 1
2 Frame 1
3 Control base 1
1
3
2
10 SmartFan EN
3.4 Dimensions
3.5 Required tools
The following equipment is needed to install the SmartFan:
•CoredrillwithaØ162mmbit
•Sabresawforsawingplastic
•Mountingadhesive/sealanttoxthemountingtubeinplace
•2.5mmslotscrewdriver
•Hammerandchiselforcableducts/slits
•Deeppattressboxforushmounting
(single or double, dependent on the choice of installation)
198
45
199
>360
500
160
3
500
162
240
220
Otros manuales para SmartFan
2
Tabla de contenidos
Otros manuales de Admirador de getAir
getAir
getAir easyFan Manual de usuario
getAir
getAir SmartFan X Manual de usuario
getAir
getAir SmartFan X9 Instrucciones de funcionamiento
getAir
getAir SmartFan Manual de usuario
getAir
getAir SmartFan XR Manual de usuario
getAir
getAir easy ALD Manual de usuario
getAir
getAir SmartFan XR Manual de usuario
getAir
getAir SmartFan Instrucciones de instalación
