Gestetner CS210 Manual de usuario

123

Adjustment and Color

Memory

Adjustment and Color

Memory

124

Color Balance—Adjusting and Storing the Color Balance

This function allows you to control the overall color tone of copies by adjusting the Yellow, Magenta, Cyan and

Black color balance. Nine levels of tone are available.

Reference

For copy sample, ☛see page 19.

Note

❐The color balance will return to the default when:

•The machine is automatically reset.

•The Clear Modes key is pressed.

•The operation switch is turned off.

•The main power switch is turned off.

❐You can store and adjustments you make in memory and recall them later.

❐You can sample color balance. ☛See page 126.

Color Balance Adjustment

1Press the Adjustment/Memory key.

2Make sure that the [Color Balance] key is se-

lected.

3Adjust the color balance, then press the [OK]

key.

125

Adjustment and Color

Memory

Color Balance Program—Storing and Recalling the Color Balance

You can store the color balance setting in memory and recall it when you want to use it.

Note

❐You can store up to three color balance.

Storing the adjusted color balance

1Change the color balance (☛see page 124),

but don’t press the [OK] key.

2Press the [Color Balance Program] key.

3Press the [Program] key.

4Select a number for this setting.

Recalling the color balance

1Press the Adjustment/Memory key.

2Make sure that the [Color Balance] key is se-

lected.

Color Balance—Adjusting and Storing the Color Balance

126

3Press the [Color Balance Program] key.

4Make sure that the [Recall] key is selected.

5Select the setting you want to recall.

Note

❐Only color balance programs with mcontain a color

balance.

Color Balance Sample—Sampling the Color Balance

Adjusting the color balance by trial and error could require many copies. The color balance sampling function

allows you to produce nine samples on two copies. The first sample of each sheet uses the current color

balance (standard). Each sample after that changes one toner color by a fixed number of steps.

Note

❐The sample will be copied on two A4p, 81/2" ×11"p sheets or two A3l, 11" ×17"lsheets.

❐Selecting Color Balance Sample does not reset the adjustments, allowing you to make many samples while

progressively changing the balance. The sample might yield a color balance outside the copier’s range which will be

reproduced on the sample but not on the copy.

For example, if yellow is already adjusted to +3 and you select Sample ±4, the yellow samples will be copied at yellow

+7 and –1, but the adjustment for the final copy cannot be set to +7.

❐The sampled area is as shown in the illustration.

❐If your machine is Edit type, you can select the sampled area. ☛See page 128.

Color Balance—Adjusting and Storing the Color Balance

1: Sampled area

127

Adjustment and Color

Memory

Color Balance—Adjusting and Storing the Color Balance

1Press the Adjustment/Memory key.

2Make sure the [Color Balance] key is selected.

3Press the [Color Balance Sample] key.

4Select the range of densities (standard is the

current setting).

5Set your original on the exposure glass.

6Press the [Print Start] key.

Note

❐The sample is copied.

7Select the color balance that you want to set,

then press the [OK] key.

128

Color Balance—Adjusting and Storing the Color Balance

Selecting the sampled area (Only for Edit type)

Note

❐The sampled area is as shown below.

a: 58mm, 2.3"

b: 180mm, 7.1"

❐Orientation of the original and scanned image are related as shown:

1Press the Adjustment/Memory key.

GCAREA5E

Exposure Glass Display

Sampled area

Selected position

129

Adjustment and Color

Memory

Color Balance—Adjusting and Storing the Color Balance

2Make sure the [Color Balance] key is selected.

3Press the [Color Balance Sample] key.

4Select the range of densities (standard is the

current setting).

5Set your original on the exposure glass.

6Press the [Sample Area Selection] key.

7Press the [Scan Start] key.

Note

❐The image of the original is displayed.

8Point at the center of the area with the editor

pen, then press the [OK] key.

Note

❐For details about this display, ☛see page 142.

130

9Press the [Print Start] key.

Note

❐The sample is copied.

0Select the color balance that you want to set,

then press the [OK] key.

Color Balance—Adjusting and Storing the Color Balance

131

Adjustment and Color

Memory

Color Adjustment

This function lets you alter up to three single colors by mixing them with adjacent colors in the color circle. For

example, yellow can be shifted towards red to make orange, or towards green to make a yellow green. Note

that only areas of the image containing this color will be modified.

Reference

For copy samples, ☛see page 20.

Note

❐This function requires Full Color mode or Auto Color Select mode.

❐The single color adjustment will return to the default when:

•The machine is automatically reset.

•The Clear Modes key is pressed.

•The operation switch is turned off.

•The main power switch is turned off.

1Press the Adjustment/Memory key.

2Press the [Color Adjustment] key.

3Select the color key that you want to adjust from

the color circle.

4Adjust the color with the keys.

Note

❐For example, if you wish to make yellow appear more

red, press the []key.

❐If you wish to make yellow appear more green, press

the [ ] key.

5Press the [OK] key.

132

Image Adjustment

You can change the following default settings for image adjustment:

Soft/Sharp

Contrast

Background Density

Pastel

U.C.R. Adjustment

A.C.S. (Auto Color

Selection) Sensitivity

Text/Photo Sensitivity

You can adjust the edges of the image to make the image sharper or softer.

Reference

❐For copy samples, ☛see page 20.

Note

❐Default: level 4

You can adjust the contrast between light parts and dark parts of the image.

Reference

❐For copy samples, ☛see page 20.

Note

❐Default: level 5

You can adjust the background density control.

Reference

❐For copy samples, ☛see page 20.

Note

❐Default: level 5

❐If copying a newspaper or an original with a dark background, adjust the background

density to a lighter setting.

❐If part of the original is marked with a highlighting pen, adjust the background density

to a darker setting. However, because the color of a highlighting pen is difficult to

duplicate, it might be copied in different colors or some colors might not be copied.

You can make copies in pastel tones.

Reference

❐For copy samples, ☛see page 20.

Note

❐Default: level 9 which yields a normal color copy

You can adjust the black toner density to make the black parts clearer in Full Color mode.

Note

❐Default: level 5

❐Adjust this setting to a darker setting when you want to copy letter parts clearly in

black.

❐Adjust this setting to a lighter setting when the original image is dark.

You can adjust the sensitivity when detecting whether the original has color areas in

Auto Color Select mode. When set to “B&W” values, the machine will be more likely to

detect originals as black originals. “Full Color” values will cause the machine to be more

likely to detect originals as color originals.

Note

❐Default: level 3

You can adjust the sensitivity when detecting letter and photo parts of an original in Text/

Photo mode. If letter parts photo parts of an original are not differentiated correctly, adjust

this setting.

Note

❐Default: level 5

Otros manuales para CS210

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Copiador de Gestetner

Gestetner

Gestetner DSm755 Manual de servicio

Gestetner

Gestetner DSm725e Manual de usuario

Gestetner

Gestetner AO70 Manual de usuario

Gestetner

Gestetner DSc224 Manual de servicio

Gestetner

Gestetner 460 Manual de usuario

Gestetner

Gestetner 5502 Instrucciones de uso

Gestetner

Gestetner 3220 Manual de usuario

Gestetner

Gestetner 3532 Manual de usuario

Gestetner

Gestetner 2212 Manual de usuario

Gestetner

Gestetner 1045 Manual de usuario

Gestetner

Gestetner 9980 Instrucciones de instalación y mantenimiento

Gestetner

Gestetner CS555 Manual de usuario

Gestetner

Gestetner 9870 Instrucciones de funcionamiento

Gestetner

Gestetner 5390 Manual de usuario

Gestetner

Gestetner 3240 Manual de usuario

Gestetner

Gestetner 6002 Instrucciones de uso

Gestetner

Gestetner 3220 Manual de servicio

Gestetner

Gestetner DSc545 Manual de servicio

Gestetner

Gestetner DSm725e Instrucciones de instalación y mantenimiento

Gestetner

Gestetner DSm616 Instrucciones de instalación y mantenimiento

Gestetner

Gestetner F550 Manual

Gestetner

Gestetner F104 Manual de servicio

Gestetner

Gestetner DSm635sp Instrucciones de instalación y mantenimiento

Gestetner

Gestetner 2135DP Instrucciones de uso

Manuales populares de Copiador de otras marcas

Canon

Canon iR1210 Manual de referencia

Ricoh

Ricoh FW740 Manual de usuario

Minolta

Minolta CF910 Manual de usuario

Ricoh

Ricoh B003 Manual de usuario

Xerox

Xerox EC70 Manual de usuario

Oce

Oce 9800 Manual de usuario

Olivetti

Olivetti d-Copia 1800 Manual de usuario

Minolta

Minolta Di181 Manual de usuario

Canon

Canon iR5000i Manual de usuario

Telecrane

Telecrane F25 Manual de usuario

Xerox

Xerox WorkCentre Pro 40 Manual de usuario

Canon

Canon NP6317 Cómo utilizar

Sharp

Sharp AR-5015 N Manual de usuario

Ricoh

Ricoh Di-C1 Manual de usuario

Mita

Mita MIP-2400 Manual

Sharp

Sharp AL-2061 Manual de usuario

Muratec

Muratec MFX-C2280 Manual de usuario

Ricoh

Ricoh FT5034C Manual de usuario