Gerber EDGE FX Manual de usuario

Edge FX Lubrication

What: Lubrication of the cassette carriage, cassette pins, Z-axis lead screw, etc.

Why: Chattering noise that occurs when the cassette carriage moves down and up.

This can also lead to color to color registration problems.

What you will need:

•2.5mm Allen Wrench

•3mm Long Allen Wrench (Ball end is best)

•Synthetic Grease

•3 in 1 Oil

•Cleaning Swabs (Fingers will do, but I don’t recommend it.)

How: Throughout this procedure, you will be raising and lowering the cassette

carriage. To do so, follow these simple instructions. (This takes you into menus and

functions that can adversely affect print quality. Do not press any buttons that are

not specifically mentioned in these instructions.)

•Make sure the Edge is Offline

•Press F2 + F4 at the same time to enter the Manufacturing Menu

•Press Next 3 times to get to Manufacturing Menu 4

•Press F1 (Z-Axis)

•Press the < (left slew button) to lower the cassette carriage and > (right slew

button) to raise it.

•When you are finished, press F3 to cancel out of the Manufacturing Menu.

Now, on to the good stuff –

1. Remove the foil caddy

2. Raise the cover

3. Using the instructions above, lower and raise the cassette carriage a few times

to identify the points that rub or slide against. You will probably notice more

“chatter” when the carriage is moving back up. Leave the carriage in the up

position.

4. Remove the covers:

a. Using the 3mm Allen Wrench, remove

the three screws holding in the black

cover around the caddy slot. (Note

that the longer one goes in the

bottom when you put it back

together.)

b. Using the 2.5mm Allen Wrench,

remove the two round head screws

from the back, top cover.

TechSupportHotline: 888-336-8323

c. Open the lid and using the 3mm long handled Allen Wrench, remove the

screws indicated in the pictures below. The right side will be the

hardest one to reach – this is where the long handle and ball end really

come in handy – especially when you go to put the cover back on.

5. With the covers off and the lid down,

look down at the top and you’ll see the

Z-axis lead screw and lead screw nut.

As you press the slew keys you’ll see

the lead screw turn which raises and

lowers the printhead and carriage

assembly. Make sure that you do not

run the printhead down into the platen

– damage to the printhead can occur.

Using a cleaning swab, apply a small amount of synthetic grease along the

exposed length of the lead screw, then using the slew keys, run the lead screw

back and forth a few times to spread the grease.

6. Now lift up the lid and apply synthetic grease (sparingly) to the friction points

on the carriage

assembly.

7. With the cassette carriage in the down

position, the foil pins are exposed. Put one

drop of 3 in 1 oil on each pin.

8. Run the carriage up and down at least 10

times (with the cover open) to distribute the

grease and oil.

9. Replace the covers and you’re back in

business.

Please call if you have any questions.

TechSupportHotline: 888-336-8323

Otros manuales para EDGE FX

Tabla de contenidos

Otros manuales de Impresora de Gerber

Gerber

Gerber ODYSSEY XP Manual de usuario

Gerber

Gerber Signmaker IVB Manual de usuario

Gerber

Gerber GS750 Plus Manual de usuario

Gerber

Gerber SOLARA UV2 Manual de usuario

Gerber

Gerber InkJet Printer Manual de usuario

Gerber

Gerber Edge Manual de usuario

Gerber

Gerber EDGE FX Manual de usuario

Gerber

Gerber P2C 600 Manual de usuario

Gerber

Gerber enVision Manual de usuario

Gerber

Gerber P2C 1600 Manual de usuario

Gerber

Gerber Edge Manual de usuario

Gerber

Gerber HS15 Plus Manual de usuario

Gerber

Gerber HS750 Plus Manual de usuario

Gerber

Gerber Solara ion Manual de usuario

Gerber

Gerber P2C 1200 Manual de usuario

Gerber

Gerber EmbossTrack series Manual de usuario

Gerber

Gerber MAXX 2 Manual de usuario

Gerber

Gerber EDGE 2 Manual de usuario

Gerber

Gerber Jetster Manual de usuario

Gerber

Gerber Sabre Manual de usuario

Gerber

Gerber P2C 1200 Manual de usuario

Gerber

Gerber EDGE FX Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario