Genius TRAVELER 600 Manual de usuario
i
Table of Contents
Chapter 1 Introducing the Remote 600 1
Remote 600 Features............................................ 2
Unpacking the Remote 600................................. 2
About the Remote 600 ......................................... 3
Chapter 2 Quick start 4
Installing batteries.................................................. 4
About the controls ................................................ 6
Touch screen precautions ........................... 6
Selecting devices and pages ..................... 7
Loading preset codes using auto search.. 8
Chapter 3 Setting up the Remote 600 10
Entering setup ...................................................... 10
Changing the LCD layout.................................. 11
Using preset codes.............................................. 12
Manually setting preset codes.................. 13
Checking the code number ..................... 14
Learning codes.................................................... 15
Deleting codes .................................................... 17
Deleting codes one button at a time...... 18
Deleting codes one device at a time ..... 18
ii
Creating Macros ................................................. 19
Resetting factory defaults.................................. 21
Chapter 4 Using the Remote 600 22
Button protection ................................................ 22
Record button protection.................................. 23
Punch thru ............................................................ 23
Auto power-off .................................................... 25
Wake up sensor ................................................... 25
Backlight ............................................................... 25
Appendix 26
Specifications....................................................... 26
Troubleshooting ................................................... 27
ENGLISH
1
Chapter 1 Introducing the Remote 600
Congratulations on purchasing the Remote 600
Touch Screen Remote Control. The Remote 600 is
a digital universal remote control that is easy to
use and enables you to control all your
electronic devices equipped with an infrared (IR)
remote.
The Remote 600 has a user-friendly touch screen
panel. You can control up to six devices,
including VCRs, DVDs, TVs, and satellite receivers.
You can quickly configure the Remote 600 for
each device in your household or office, using
the innovative “learning eye” feature. The
advanced macro function enables you to
initiate a chain of up to 60 commands with the
touch of a single key.
Easy to use, the Remote 600 provides you with a
complete central control solution.
NOTE: This manual helps you learn how to use the
advanced features of the Remote 600. It does
not explain how to use the functions for your
devices. Please refer to your device’s user
manual for information related to your device.
ENGLISH
2
Remote 600 Features
• Macro sequence function—each macro
can store 60 commands
• Controls up to six devices, including DVDs,
TVs, Satellite Receivers, VCRs and other
infrared remote control devices
• IR code learning from existing remote
controls for quick configuration
• Preset manufacturer’s codes for many
models
• Up to 44 user-programmable keys for each
device
• Automatic Power Saving mode turns off the
remote after 90 seconds of inactivity
Unpacking the Remote 600
Check the package to make sure the following
items are included.
• Remote 600
• User Manual
• Multi-language e-manual on CD
• Pre-programmed Code List
• AAA batteries x 4
If any of these items are missing or damaged, contact
your dealer immediately. Do not throw the packaging
in case you need to ship your Remote 600.
ENGLISH
About the Remote 600
3
IR transmitte
r
LED indicato
r
Backlight switch
PC link
Power switch
Return
Channel +/-
Device buttons
Learning eye
Programmable
number buttons
Page indicato
r
Device indicato
r
Low battery indicato
r
LCD touch screen
Setup button
Volume +/-
3
ENGLISH
4
Chapter 2 Quick start
This chapter provides you with the information to
quickly start using the Remote 600.
Installing batteries
The Remote 600 requires four AAA alkaline
batteries (not included). You must insert the
batteries before you can operate the Remote
600.
1. Turn the remote
over, gently press
the cover in and
open in the
direction of the two
arrows by your thumbs, according to the
illustration.
2. Insert the batteries,
observing correct
polarity.
3. Insert the tabs into
place and push the
cover closed.
ENGLISH
Battery Indicator
A battery icon is displayed in the upper left-hand
corner above the Mute button.
When the batteries are almost discharged, the
battery low icon appears.
Battery Tips and Precautions
• Pay attention to the batteries when the
battery half full icon appears and replace
batteries if needed.
• The Remote 600 does not lose programmed
data when batteries are replaced.
• Always use fresh batteries. Alkaline batteries
are recommended. Do not mix different
types of batteries.
• Do not expose the batteries to excessive
heat or naked flame.
• Keep batteries out of the reach of children.
• Weak batteries reduce the effective
distance of the unit.
• Remove the batteries if the Remote 600 will
not be used for a long period.
• To reduce danger of leakage, remove
batteries that are more than two years old.
5
ENGLISH
6
About the controls
The number of soft buttons on the touch screen
changes according to the selected device. The
touch screen soft buttons allow you to operate
the Remote 600 and your external devices. Use
these keys to program codes from your existing
remotes, control your devices, and set up
macros. You will hear a beep when you press a
button. The Remote 600 turns itself off after 90
seconds of inactivity
Touch screen precautions
• Tap the LCD touch screen gently. Do not
use excessive force.
• Do not use pens or sharp objects to tap the
screen, as you might damage the surface.
• Keep the Remote 600 dry. Wipe off any
spills immediately. Never immerse it in liquid.
• Do not expose the Remote 600 to extreme
temperatures. Keep it away from heat
sources.
• Avoid dropping the Remote 600.
• Do not drop anything on the touch screen.
• Clean the LCD touch screen with a soft,
damp cloth. Do not use abrasives or
cleaning solutions.
ENGLISH
Selecting devices and pages
You can program the hard buttons as well as
two pages of soft buttons (on the touch screen)
for up to six devices. To change between
devices, press the appropriate device button. To
switch between pages, press the device button
again. The current page is indicated by or
in the top right corner of the touch screen.
7
ENGLISH
Loading preset codes using auto search
You can quickly start using your Remote 600 by
using the auto search to load preset codes.
1. Switch on the device for which you want to
set up the Remote 600.
2. Select the appropriate device on the Remote
600 using the device buttons. See Selecting
devices and pages on page 7.
3. Press and hold for two seconds to enter
setup on the touch screen.
4. Press .
5. Point the IR transmitter of the
Remote 600 at the device
then press .
6. The Remote 600 will try to turn off the device
by transmitting different preset IR codes.
When the device switches off, immediately
press any hard button or touch the screen.
7. Ensure that you have the correct code by
pressing Volume +/-, Channel +/- or to test.
If the code is not correct, press " " or " "
and test the code again.
8. Press the button to save and exit.
8
Otros manuales para TRAVELER 600
1
Tabla de contenidos
Otros manuales de Mando a distancia de Genius
Genius
Genius AMIGO Series Manual de usuario
Genius
Genius ECHO TX4 Manual de usuario
Genius
Genius REMOTE 815 Manual de usuario
Genius
Genius AMIGOLD TX4 868 Manual de usuario
Genius
Genius Kilo TX2 Manual de usuario
Genius
Genius Amigo Manual de usuario
Genius
Genius KILO TX2 Manual de usuario
Genius
Genius ECHO TX4 RC Manual de usuario
Genius
Genius 07R - 10 Manual de usuario
Genius
Genius coralis CRH-01-T-00 Manual de usuario
