Genius TRAVELER 915BT LASER - Manual de usuario
ENGLISH
1
Hardware Installation
1. Install two AAA batteries in the mouse.
Pairing Process in Vista and Windows XP SP2
1. Open the Windows control panel, then
select “Bluetooth devices”.
2. Click
“Add…..”
3. Select “My device is setup
and ready to be found”, then
click “Next”.
ENGLISH
2
4. Press and hold the “CONNECT”
button under the mouse.
5. In “Peripherals
(Keyboards, mice,
joysticks)”, select Genius
Bluetooth Mouse and
click “Next”.
6. Select “Don’t use a
passkey” and click
“Next”.
ENGLISH
3
7. Windows will start to connect
the Genius Bluetooth Mouse
automatically. Press the finish
button after the connection
process is completed.
Once the connection between the
Genius Bluetooth Mouse and your
computer is established, the
connection will be kept permanently.
That means the connection will
re-establish automatically each time
you run Windows.
Pairing Process in Mac OS X 10.2.6 or later
1. Press and hold the “CONNECT” button
under the mouse.
ENGLISH
4
2. Click the Bluetooth icon
on the task bar and select
“Setup Bluetooth device”.
3. Click “Continue” when the “Bluetooth Setup Assistant” appears.
ENGLISH
5
4. Choose “Mouse”
and press
“Continue” to the
next step.
5. When Bluetooth
finds the “Genius
Bluetooth Mouse”,
please press
“Continue” to the
next step.
6. Click “Continue”
when the “Passkey
exchange with your
mouse” appears.
ENGLISH
6
7. The connection is now successful and you can use your Genius
Bluetooth Mouse.
Now you can use the Genius Bluetooth Mouse wirelessly with a
Bluetooth enabled Apple computer. Afterwards, the connection of the
Genius Bluetooth mouse will re-establish automatically each time
Mac OS X runs.
Software Installation (for 4D scrolling only)
1. Make sure the mouse is connected to the computer.
2. Put the CD driver into the CD drive.
3. Follow the instructions on the screen to finish the software
installation.
Adjust dpi resolution
Press left and right button together for
three seconds, the resolution will switch
from 1600 to 800 dpi. Press both buttons
again for three seconds and it will revert
to 1600 dpi. The LED flash is shorter for
800 dpi.
ENGLISH
7
Note:
1. Class 1 Laser Product. Passed eye-safety regulation
(IEC 60825-1)
2. Class 2 Laser Product. The last pointer is dangerous to eyes!
Do not stare into the beam, and be sure to avoid any child
using the pointer.
Factory Setting
Use “Switch Button” to switch from “Mouse mode” and “Presenter
mode” for different functions. LED flash will show you which mode
is now. When LED in “BLUE” is in Mouse mode and LED in “RED”
is in Presenter mode.
In Mouse mode:
1. Left Button: Provides traditional mouse functions like click,
double click and drag.
2. Right Button: Provides traditional mouse click functions.
3. Magic-Roller: Press the “Magic-Roller” to surf the Internet and
Windows documents.
ENGLISH
8
Horizontal Scroll: Press the roller to the left and the cursor
scrolls to the left; press the roller to the right and the cursor
scrolls to the right.
4. Switch Button: To switch from Mode-1(Mouse) or
Mode-2(Presenter) function.
5. LED indicator: If your battery power is low, the LED will
brighten. When LED in “BLUE” is in Mouse mode.
In Presenter Mode:
1. Left Button: Next page when you are in PowerPoint.
2. Right Button: previous page when you are in PowerPoint.
3. Magic-Roller: Press the “Magic-Roller” to use laser point.
Horizontal Scroll: Press the roller to the right is F5 (like keyboard
function) for play PowerPoint in your presentation. Press the
roller to the left is ESC.
4. Switch Button: To switch from Mode-1(Mouse) or
Mode-2(Presenter) function.
5. LED indicator: If your battery power is low, the LED will
brighten. When LED in “Red” is in Presenter mode.
ENGLISH
9
Button Function:
Button Mouse mode Presenter mode
1 Left Button Next page
2 Right Button Previous page
Magic-Roller Laser On/Off
Scroll right: F5
3 Horizontal Scroll Scroll left: ESC
4 Mode switch Mode switch
5 LED indicator in blue LED indicator in red
This device complies with Part 15 of the FCC rules, operation is
subject to the following two conditions.
（1）This device may not cause harmful interference and,
（2）This device must accept any interference received,
including interference that may cause undesired operation .
NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH
MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT
Otros manuales para TRAVELER 915BT LASER -
1
Tabla de contenidos
Otros manuales de Ratón de Genius
Genius
Genius Ergo 8200S Manual de usuario
Genius
Genius NX-7010 Manual de usuario
Genius
Genius NAVIGATOR 900 PRO Manual de usuario
Genius
Genius GX Gaming Series Manual de usuario
Genius
Genius WebScroll+NB Eye Manual de usuario
Genius
Genius TRAVELER 515 LASER Manual de usuario
Genius
Genius ERGO 525 Manual de usuario
Genius
Genius NETSCROLL 220 LASER Manual de usuario
Genius
Genius NETSCROLL 310 Manual de usuario
Genius
Genius Bluetooth Traveler Manual de usuario
Genius
Genius NAVIGATOR 365 LASER Manual de usuario
Genius
Genius GX Gaming Series Manual de usuario
Genius
Genius NS-6005 Manual de usuario
Genius
Genius ERGO 720 LASER Manual de usuario
Genius
Genius TRAVELER 1000 Manual de usuario
Genius
Genius NX-7015 Manual de usuario
Genius
Genius TRAVELER 330 Manual de usuario
Genius
Genius ERGO 720 Manual de usuario
Genius
Genius GM-130024/T Manual
Genius
Genius NAVIGATOR 805 Manual de usuario
