Genesis 11c EFORCE 2.0 Manual de usuario
VERSION 10-30-2023
SLi TOOL USER MANUAL
RM-013 REV. 2 Rel. Date 10-11-2023
Created by: Cory Johns, April Sova
Approved by Scott Cornell
THIS MANUAL COVERS
11C, 11CRIT, 14C, 15C, 17C, 19C, SC198, SC198NXT GEN, SC240, SC240NXT GEN,
SC385, F7, S44, S49, S54, 21-36 RAM, 22-54 RAM
2780 CULVER AVE. | KETTERING, OHIO 45249 | TEL: 1.937.293.6240 | WWW.GENESISRESCUE.COM
2 WWW.GENESISRESCUE.COM
1. General
1.1 Information on the Operating Instructions 5
1.2 Explanation of Symbols 6
1.3 Limitation of Liablity 7
1.4 Copyright 7
1.5 Warranty Provisions 8
1.6 Customer Service 8
2. Safety 9
2.1 Intended Use 9
2.2 Operator Responsibility 11
2.3 Operating Personnel 12
2.4 Personal Protective Equipment 13
2.5 Particular Hazards 14
2.6 Conduct in Dangerous Situations and Accidents 16
2.7 Signage 17
3. Technical Specications 18
3.1 Combi Tools 18
3.2 Cutters 19
3.3 Spreaders 20
3.4 Rescue Rams 21
3.5 Operating Conditions 21
3.6 Type Plate 21
4. Structure and Function 22
4.1 Overview of SLi Equipment 22
4.2 Cutter 23
4.3 Spreaders 24
4.4 Rescue Rams 25
CONTENTS
"uncontrolled if printed"
3 WWW.GENESISRESCUE.COM
4.5 Hydraulic Supply 26
4.6 Electrical Supply, Using a Combi Tool as an Example 27
4.7 Underwater Use 28
4.7 Communication Module and Radio Connection 29
4.8 Operating SLi Equipment 32
4.9 Device Registration for SLi Rescue Tools 32
4.10 Accessories 33
4.11 Replacing Blade Inserts (NXT GEN) 34
4.12 Replacing the Spreader Tips 35
5. Applications 36
5.1 Safety Instructions 36
5.2 Cutting (Cutters, Combi Tools) 36
5.3 Pushing (Rescue Rams) 37
5.4 Spreading (Spreaders, Combi Tools) 37
5.5 Pulling (Spreaders, Combi Tools, Rescue Rams) 38
5.6 Squeezing (Spreaders, Combi Tools) 39
5.7 Lifting (Spreaders, Combi Tools, Rescue Rams) 39
5.8 Peeling (Spreaders, Combi Tools, Rescue Rams) 39
6. Battery and Charger 40
6.1 Charger Technical Data 40
6.2 Special Safety Instructions 40
6.3 Intended Use 42
6.4 Mains Connection 42
6.5 Li-ion Battery 42
6.6 Charging Process 43
6.7 Maintenance 43
TABLE OF CONTENTS (CONT.)
"uncontrolled if printed"
4 WWW.GENESISRESCUE.COM
7. Transport, Packaging and Storage 44
7.1 Safety Instructions 44
7.2 Transport Inspection 44
7.3 Symbols on the Packaging 45
7.4 Dispoal of Packaging 45
7.5 Storage 45
8. Installation and Commissioning 46
8.1 Safety Instructions 46
8.2 Checks 46
8.3 Shut-down (End of Work) 47
8.4 Advantages of Device Registration 48
9. Maintenance 49
9.1 Safety Instructions 49
9.2 Upkeep and Maintenance 49
9.3 Maintenance After Operation in Humidity 50
9.4 Maintenance After Underwater Use 50
9.5 Maintenance Schedule 50
10. Malfunctions & Faults 51
11. Decommissioning/Recycling 53
TABLE OF CONTENTS (CONT.)
"uncontrolled if printed"
5 WWW.GENESISRESCUE.COM
1. General
1.1 Information on the Operating Instructions
These operating instructions provide information on using SLi equipment. To assure safety
at the workplace, always observe all safety and handling instructions contained in this
document.
When using the equipment at the operation site, please follow the local Health & Safety
guidelines and applicable risk assessments.
Before starting any work you must read these operating instructions thoroughly! They are a
component of the product and must be stored in a known location that is accessible to
personnel at all times.
This document contains information about the operation of your tool, regardless of which
type of tool it is. For this reason, you will also nd explanations that do not relate directly to
your tool.
All information, technical specications, graphics and illustrations contained in these
Operating Instructions are based on the most up-to-date data available at the time these
instructions were created.
In addition to thoroughly reading the operating instructions, we also recommend that you
undergo training and instruction in handling (possible uses, operational tactics, etc.)
the rescue equipment from one of our qualied trainers.
i
NOTE!
The current version of the operating
instructions can be found on our website
https://www.genesisrescue.com/
or by scanning the QR code.
"uncontrolled if printed"
6 WWW.GENESISRESCUE.COM
GENERAL
1.2 Explanation of Symbols
Warnings
In these operating instructions, warnings are identied by symbols.
The individual warnings are introduced by signal words expressing the degree
of danger.
These warnings must be followed to prevent accidents, injury and property damage.
DANGER!
...points out an immediately dangerous situation which can cause
death or severe injury if it is not avoided.
ATTENTION!
...points out a potentially dangerous situation which can cause
property damage if it is not avoided.
CAUTION!
...points out a potentially dangerous situation which can cause
minor or slight injury if it is not avoided.
WARNING!
...points out a potentially dangerous situation which can cause
death or severe injury if it is not avoided.
"uncontrolled if printed"
7 WWW.GENESISRESCUE.COM
Tips and Recommendations
iNOTE!
...emphasises useful tips and information for efcient, trouble-free
operation.
1.3 Limitation of Liability
All information and instructions in these operating instructions were compiled under
consideration of the applicable standards and regulations, the current state of technology
and our long-standing knowledge and experience.
The manufacturer assumes no liability for damages due to:
For special designs or due to technical changes, the actual scope of supply may differ from
the explanations and representations described.
1.4 Copyright
All texts, illustrations, drawings and images in these operating instructions may be used
freely without prior authorization.
• Non-observance of the operating instructions
• Improper use
• Assigning untrained personnel
• Unauthorized modications
• Technical changes
• Use of impermissible replacement parts
• Use of non-original accessories
"uncontrolled if printed"
8 WWW.GENESISRESCUE.COM
GENERAL
NOTE!
Additional information, images and diagrams are available on our
website: www.genesisrescue.com
i
NOTE!
When contacting Customer Service, please provide the
identication, type and year of the manufacture of the
equipment. This information can be found on the type
plate. For further assistance, please locate your dealer
through the QR Code:
i
1.5 Warranty Provisions
The warranty provisions are included with the sales documentation as a separate document.
1.6 Customer Service
Our Customer Service would be happy to provide you with technical information.
Phone: 937.293.6240
Fax: 937.293.7049
For all other harware components, please contact your respective dealer
using our Dealer Locator through the QR Code below.
"uncontrolled if printed"
9 WWW.GENESISRESCUE.COM
2. Safety
This section of the operating instructions presents a comprehensive overview of all
important safety aspects for optimal protection of the operating personnel as well as safe,
trouble-free operation.
Non-observance of the handling and safety instructions presented in these Operating
Instructions can result in serious dangers.
2.1 Intended Use
The hydraulic battery tools are designed and tested exclusively for the intended
applications described here. All other activities are fundamentally prohibited.
All battery tools are designed as one-person tool and are therefore to be operated by only
one person.
Cutters (SC198, SC198NXT GEN, SC240, SC240NXT GEN, SC385, F7)
Spreaders (S44, S49, S54)
• The battery-powered cutting tools are used exclusively for cutting doors, roof
beams, pillars, door sills, the ring and the spokes of the steering wheel.
• If possible, for cutting solid material, always use the rear part of the cutter blades
as it is equipped with special edges for cutting round material.
• In industrial application, the equipment can also be used to cut pipes, structural
steels, proles, sheets and cables.
• The battery-powered spreading tools can be used for opening doors, lifting
vehicles or other moveable loads, pushing away and moving vehicle parts and
loads, and squeezing pipes and tie bars.
• If possible, always use the tips of the spreader for squeezing.
• The spreader tips can also be used as a peeling tool.
• The chain set is solely to be used for pulling.
"uncontrolled if printed"
10 WWW.GENESISRESCUE.COM
SAFETY
Combi Tools (11C/11CRIT, 14C, 15C, 17C, 19C)
Rescue Rams (21-36, 22-54)
Accessories - Chain Sets
• The battery-powered combi tools may be used for the specied purposes
of both the cutters and the spreaders. The spreader tips can also be used
as a peeling tool.
• The tools are used to lift and push up steering columns, vehicle roofs and
other vehicle parts.
• In addition, under certain conditions and while exercising particular care,
rescue rams can be used for support, lifting and stiffening.
• Spreaders and combi tools may only be used with the appropriate chain
set and pulling device. Pulling chains are exclusively for pulling away
obstacles and loads and for enlarging openings to free trapped persons.
NOTE!
All SLi equipment (cutters, spreaders, combi tools and rescue rams)
are intended for use in the professional or industrial sector and not for
private use!
i
WARNING!
Danger caused by improper use!
Any use other than intended use and/or other type of use of the tool can
cause dangerous situations!
Therefore, it is absolutely necessary to:
• Only use the tool for the intended uses described above.
• Observe all other information regarding proper use of the
tools in Chapter 5 (Possible Uses).
"uncontrolled if printed"
Otros manuales para 11c EFORCE 2.0
1
Este manual sirve para los siguientes modelos
16
Tabla de contenidos
Otros manuales de Herramientas de Genesis
