General Sensing Systems 2ABFESPRM20 Manual de usuario
Gimbal
DISCLAIMER AND WARNING
Thank you for purchasing our Gimbal. Before you start PLEASE read
this manual and become familiar with Gimbals’ components and
operating modes to ensure proper operation. The information contains
herein affects your safety and your legal rights and responsibility.
Failure to read and follow the instructions and warnings may result in
serious injury to you or damage to your device or property.
By using this product, you hereby signify that you have read this
document carefully and that you understand and agree to abide by the
terms and conditions herein. You agree that you are solely responsible
for you conduct while using this product and for any consequences
thereof. You agree to use this product only for purposes that are proper
and in accordance with all terms, precautions, practices, policies and
guidelines our company has made and may make available.
Our company accepts no liability for damage, injury or any legal
responsibility incurred directly or indirectly from the use of this product.
The user shall observe safe and lawful practices including, but not
limited go those set forth herein.
GLOSSARY
The following terms are used throughout the product literature to
indicate various levels of potential harm when operating this product.
Warning: Procedures, which if not properly followed, may incur
property damage, grave accident, or serious injury.
CAUTION: Procedures, which if not properly followed, may incur
property damage and serious injury.
NOTICE: Procedures, which if not properly followed, may incur property
damage or minor injury.
DISCLAIMER AND WARNING
WARNING
Read the ENTIRE User guide to become familiar with the features of our
Gimbal before operating. Failure to operate the product correctly can
result in damage to the product or personal property, and cause serious
injury. This is a sophisticated product. It must be operated with caution
and common sense and requires some basic mechanical ability. In-
correct Use of product in a safe and responsible manner could result in
injury or damage to the product or other property. This product is not
intended for use by children without direct adult supervision. DO NOT
use with incompatible components or in any way otherwise as
mentioned or instructed in the product documents provided by our
company. This Safety Guidelines herein contain instructions for safety,
operation and maintenance. It is essential to read and follow all of the
instructions and warnings in the user manual, prior to assembly, setup
or use, in order to operate the product correctly and avoid damage or
serious injury.
SAFETY OPERATION GUIDELINE
The Gimbal should be used in temperatures from 0℃to 40℃.
Use of the battery in environments above 40℃can lead to a fire or
explosion. Use of battery below 0℃can lead to serious damage.
IMPORTANT BATTERY SAFETY INFORMATION
•DO NOT use any third-party or unknown accessories or batteries.
•DO NOT disassemble the battery.
•DO NOT short-circuit the battery. Short circuiting may occur when the battery
touches other metal objects.
•DO NOT charge the battery in direct sunlight.
•Always charge the battery in a designated space, away from people and animals.
•DO NOT leave a battery on prolonged charge when not in use.
•If the battery has a high surface temperature, leave it to cool before you try to re-
charge it.
•DO NOT charge the battery if the ambient temperature is below 10°C or above
45°C.
•Always use the supplied charger and observe manufacturer charging
requirements.
•Battery performance is best when within normal room temperature (5°C-20°C).
•Batteries need to be charged before use.
STORAGE
1. DO NOT leave the Stabilizer Gimbal hicle on hot days.
2. Store Gimbal in dry environment, and never store the Gimbal in any
environment with temperature of over 60℃.
3. Do not leave the Gimbal unused for too long after it has been completely
discharged to prevent over-discharge of battery which may result in battery damage
and permanent damage.
SAFETY OPERATION GUIDELINE
■CAUTION:
1. The Gimbal a high -precision control device, damaged may be
caused to gimbal if it is dropped or subject to external force, and this
many result in malfunction.
2. Make sure the rotation of Gimbal axes is not blocked by external
force when the gimbal is power on.
3. 3. The Gimbal is not waterproof or water-resistant. Prevent
contacts of any kind of liquid or clear with.
Prevent contacts of any kind of liquid or clear with.
It is recommended to use dry cloth for cleaning.
4. Protect the Gimbal from dust and sand during use.
■NOTICE
1. Hold the Gimbal’s Handle still in when it is powering up to ensure it
starts up successfully.
2. Make sure the batteries are fully charged before each time of use.
3. Discharge the battery to 40%~65% if it will NOT be used for over 10
days. This can greatly extend the battery life."
4. Charge and Discharge the battery completely once every 3 months to
keep it active.
Get to know the Gimbal
The gimbal is a high-precision control device. Connect to APP, it has
more face tracking, time-lapse function, etc. which can offer you
professional grade video.
1. Smartphone Clamp- hold smartphone steady.
2. Pan Motor- it allow you gimbal to rotate 330 degrees horizontally
3. Battery Level Indicator- The button shows how much power is left.
0-33% “L” light on
34-66% “L” and “M” lights on
67%-100% “L” “M” “H” lights on
4. Joystick- Control movement UP/DOWN (tilt motor) and LEFT/RIGHT
5. Bluetooth Light- Blue Light is connected, Flashing is trying to
connected.
6. Operation Mode indicator Light-Display current operation mode of
the Gimbal
6.1 Light- Gimbal in Pan & Tilt Follow Mode
6.2 Light- Gimbal in Pan Follow Mode
6.3 Light- Gimbal in Lock Mode
7. Power ON/OFF and Press 2 times to bring the Mobile phone to bring
the Mobile phone to its original position
Power ON/OFF- press and holder the button (8) for 3-4 seconds until
the three light (6.1 )(6.2)(6.3) flashes blue, than turn on (Default Mode:
Pan & Tile Mode)
Mode Button- in single press to switch mode from three operation
modes
8. Zoom Control- It enables your lens of camera from wide angle to a
closer shot of your subject
9. Holder Adjustment- Hold smartphone steady
10. Roll Motor- Allows the gimbal to rotate 180 degrees vertically.
11 Balance Screw- Help balance the weight of smartphone on gimbal.
12. Adjustable Arm- Pull out or push the arm back the adjustable arm
until the smartphone balance itself
13. Tilt Motor- It allow your phone to rotate 325 degree horizontally.
14. USB Power Out- Charges the smartphone directly from the gimbal
15. Micro USB Port- Allows the gimbal to recharge its battery by
connecting the Micro-USB to any standard USB outlet or phone charger
16. Shutter Button: Press once to take a picture,
17. 1/4 Thread Screw- Allow the gimbal to mounted on the device
through the /4 thread screw.
USB CONNECTION
IN-USE CHARGING
Connect the Micro USB Port on
the side of gimbal's handle to a
power source SUCH AS a power
pack (not include) to extend run-
times.
MOBILE CHARGING
The USB port at the bottom of the
gimbal handle can be used for
charging of your Smartphone
while use.
■An L-shape charging connector
is required when the Smartphone
is mounted horizontally on the
mobile clamp.
MOUNTING SMARTPHONE
Place Smartphone to mounting clip as show.
Slide the Smartphone to right until it
touches Tilt Motor.
ADJUST BALANCE
If the Smartphone does not stay leveled when mounted, please do as
following:
Step 1: Loosen the Roll balance Knob.
Tabla de contenidos
