Genelec AIW26 Manual de usuario

Genelec’s new AIW26 Active In-wall

speaker system consists of a bass reﬂex

type two-way speaker and a matched

remote amplifier module RAM1. It has

been designed to the same rigorous stan-

dards as Genelec’s high-performance HT

series active Home Theater loudspeakers.

No other in-wall loudspeaker can match

the low distortion, incredible neutrality

and high sound pressure capability of

Genelec AIW26. The AIW26 can be used

in the most demanding applications, like

the main L-C-R array of a Home Theater

system, critical Stereo listening or rear/

side channels of a large, state-of-the-art

Home Theater.

The AIW26 speaker has a 7” bass driver

loaded with a 8 liter bass reﬂex cabinet

and a 3/4” treble driver with a proprietary

Directivity Control WaveguideTM (DCWTM)

giving a precise and uncolored acoustic

response. The RAM1 remote amplifier

module includes active crossover circuitry

and 120 and 120 W power ampliﬁers for

the bass and treble driver respectively.

RCA and balanced XLR line level input

connectors and adjustable input sensitiv-

ity ensure convenient connection to all

types of decoders. Connectors for remote

power/standby mode switching are also

provided. The active crossover unit allows

accurate Bass Tilt, Bass Roll-Off and

Treble Tilt adjustments for ﬁne-tuning the

sound balance to suit various acoustical

conditions and listener tastes.

The solid, carefully dimensioned bass

reﬂex cabinet gives far better control of

bass reproduction than typical in-wall

speakers. The speaker ﬁts into a standard

2 x 4” wall structure and can easily be

retroﬁtted to existing construction. The

visible parts of the speaker (grill insert

and grill frame) can be painted to match

the wall colour.

The RAM1 amplifier module can be

rack mounted with its dedicated RM1

Rack Mount Kit (optional) or placed on a

shelf or into a cabinet. The wiring between

the ampliﬁer module and speaker can be

made of standard 14 or 12 gauge 4-con-

ductor wire. Expensive proprietary cables

are not needed. Each speaker/ampliﬁer

combination has been carefully tested

and matched together before delivery for

maximum accuracy.

Visit Genelec’s Home Theater website

www.genelec-ht.com for more information

of Genelec’s Home Theater speaker line.

Genelec AIW26

Active In-Wall Speaker System

Data Sheet

AIW26

System

Free ﬁeld frequency response of system: 45 Hz...21kHz (±2,5 dB)

Maximum short time sine wave acoustic

output at 1 m on axis in half space,

averaged from 100 Hz to 3 kHz: >110 dB SPL

Maximum peak acoustic output for a pair

with music material: >120 dB SPL

Drivers

Bass: 182 mm (7”)

Treble: 19 mm (3/4”) metal dome

Harmonic distortion at 90 dB SPL < 3% (50...200 Hz)

@ 1 m on axis: < 0,5% (>200 Hz)

Weight including grill assembly: 10,7 kg (23,6 lbs)

Required cut-out dimensions

Height: 545 mm (211/2”)*

Width: 334 mm (131/8”)

Depth: 88 mm (31/2”)**

*Note: The mounting brackets of the AIW26 need a

clearance inside the wall of at least 125 millimeters (5”)

above the top edge of the cut-out and 65 mm (29/16”)

Bass ampliﬁer output power: Short term 120 W

Treble ampliﬁer output power: Short term 120 W

Input impedance: 10 kOhm

Crossover frequency: 3.5 kHz

Treble tilt control in 2 dB steps

from +2 to -4 dB & MUTE: @15 kHz

Bass roll-off control in 2 dB steps

from 0 to -6 dB: @50 Hz

Bass tilt control in 2 dB steps

from 0 to -6 dB & MUTE: @100 Hz

Mains voltage: 100/200V or 115/230V

Power consumption

(Standby / Idle / Full output): 5/10/200 W

Maximum ambient temperature 35°C (95°F)

Weight: 4,6 kg (10,1 lbs)

Dimensions

Height: 130 mm (51/8”)

Width: 145 mm (53/4”)

Depth: 309 mm (123/16”)

Figure 1. AIW26 front view Figure 2. AIW26 side view

Figure 4. AIW26 top view

374 (14 3/4")

598

(23 1/2")

15 (5/8")

Figure 3. AIW26 grill frame side and front views

Figure 5. RAM1 side view Figure 6. RAM1 top view

AIW26 LOUDSPEAKER UNIT

AIW26 Data Sheet

Genelec Document BBA0005001c. Copyright Genelec Oy 11.2006. All data subject to change without prior notice

RAM1 AMPLIFIER UNIT

International enquiries:

Genelec, Olvitie 5

FIN-74100, Iisalmi, Finland

Phone +358 17 83881

Fax +358 17 812 267

Email [email protected]

In the U.S. please contact:

Genelec, Inc., 7 Tech Circle

Natick, MA 01760

Phone +1 508 652 0900

Fax +1 508 652 0909

Email [email protected]

www.genelec.com

In China please contact:

Beijing Genelec Audio Co. Ltd.

Jianwai SOHO, Tower 12, Room 2306

39 East 3rd Ring Road

Chaoyang District

Beijing 100022, China

Phone +86 0 5869 7915, Fax +86 10 5869 7914

Otros manuales de Sistema de altavoces de Genelec

Manuales populares de Sistema de altavoces de otras marcas

JVC

JVC CA-MXK5R Manual de usuario

LG NB4532B Manual de usuario

JVC

JVC CA-FSH100 Manual de usuario

5Core

5Core Pro Series Manual de usuario

EAW

EAW MQV1394e Manual de usuario

Lynx

Lynx GXR-LA10A Manual de usuario

iLive

iLive ITB066B Manual de usuario

RDX

RDX QuickStation 4 Manual de usuario

Electro-Voice

Electro-Voice S-122 Manual de usuario

Sven

Sven SPS-619 GOLD Manual de usuario

Pioneer

Pioneer CS-7070 Manual de usuario

EAW

EAW UB82e Manual de usuario

Sondpex

Sondpex Active Speaker System and Digital Music... Manual de usuario

JVC

JVC NX-PN7 Manual de usuario

Marshall Amplification

Marshall Amplification AR-DM61-BT Manual de usuario

Yamaha

Yamaha NX-A01 - Speaker Sys Manual de usuario

SE Audiotechnik

SE Audiotechnik I-LINE Manual de usuario

Gemini

Gemini WRX-843 Series Manual de usuario