Gefen VGA-2-DVISN Manual de usuario
VGA to DVI
Scaler New
USER MANUAL
www.gefen.com
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday PST
Write To:
Gefen Inc.
c/o Customer Service
20600 Nordhoff Street
Chatsworth, CA 91311
www.gefen.com
Notice
Gefen Inc. reserves the right to make changes in the hardware, packaging and any
accompanying documentation without prior written notice.
VGA to DVI Scaler is a trademark of Gefen Inc.
© 2007 Gefen Inc., All Rights Reserved
ASKING FOR ASSISTANCE
TABLE OF CONTENTS
Introduction
Features
Panel Descriptions
Connecting and Operating the VGA to DVI Scaler
Menu Functions
Troubleshooting
Specifications
Warranty
1
2
3
4
5
6
7
8
Congratulations on your purchase of the Gefen VGA to DVI Scaler New Version. Your
complete satisfaction is very important to us. Gefen’s line of KVM (Keyboard Video &
Mouse), DVI, ADC, USB, switches, extenders, converters and hubs is designed to make
computer use more comfortable, more productive and less expensive.
KVM switches allow access to multiple computers from a single keyboard, while the
extenders give the user control over a computer up to 330 feet away from the work
area.
The line offers solutions for noise, space and security concerns, data center control,
information distribution, conference room presentation, and school and corporate
training environments.
Our Commitment
Gefen will always offer the finest quality product at the best possible price. Included in
that price is a lifetime of free support from a team of outstanding engineers.
Introduction
The VGA to DVI Scaler connects traditional analog video graphic cards (VGA) to DVI
compliant digital monitors. The VGAto DVI Scaler, enables users to connect laptops or
legacy PC computers equipped with HD-15 video connections, to the new DVI (digital
visual interface) video display format. The VGAto DVI Scaler will also work with
component video sources such as DVD players and set-top boxes.
INTRODUCTION
1
FEATURES
Features
• The input is analog PC or HDTV signal in the format of either RGBHV, YPbPr or
YCbCr
• The output is digital+analog PC or HDTV signal in the format of digital RGBHV bit
stream plus analog RGBHV, known as DVI-I (Integrated digital and analog)
• The input resolution is automatically detected while the output resolution and refresh
rate can be selected through OSD menu and front panel push buttons
• 48MB frame memory for frame rate conversion
• Output picture adjustment on brightness, contrast, color, RGB level and H-V position
• DVI output enables an all digital rendering of video without the losses associated with
an analog interface and is an ideal for use with digital display such as LCD, Plasma
and DLP projectors.
• High performance Scaler that converts and scales analog RGB inputs to DVI-I
(digital or analog) outputs
• Output resolution can be easily selected using the OSD (On Screen Display)
• Supports input/output computer resolutions up to 1920x1200 at 60Hz
• Supports HDTV resolution up to 1080p as input and output
• Supports DDWG standard for DVI compliant monitors
Includes:
(1) VGA to DVI Scaler Box
(1) 5V Power Supply
(1) 6 ft VGA cable (M-F)
(1) User’s Manual
2
PANEL DESCRIPTIONS
3
CONNECTING AND OPERATING THE VGA TO DVI SCALER
How to Connect the VGA to DVI Scaler
1- Connect your analog video card to the HD-15 female connector at the input side of
the VGA to DVI Scaler Plus. (Note: The Menu button of the VGA to DVI Scaler will not
work without a source plugged in)
2- Connect the DVI (m-m) cable between the DVI connector on the digital display and
the DVI output of the VGA to DVI Scaler.
3- Connect the power supply.
*Note: The default resolution is set to NATIVE mode.
Operating the VGA to DVI Scaler
Button Function
MENU Shows and Hides the On Screen Menu /
Menu and Item Selection
+Moves menu cursor DOWN the menu /
Increases adjustment values
-Moves menu cursor UP the menu /
Decreases adjustment values
Hold MENU and unplug and replug the
power source. After you have done that,
you can release the MENU
Resets scaler back to NATIVE resolution
of the display
Auto Adjust
Press the -button
Tunes picture to displays optimum
settings
4
Output resolutions that are supported:
VGA 480I 576I WXGA
SGA 480P 576P WSXGA
XGA 720P/60 720P/50 WVXGA
SXGA 1080I/60 1080I/50 NATIVE
UXGA 1080P/60 1080P/50
MENU FUNCTIONS
5
PC MENU
Contrast:
Adjusts the picture contrast
Brightness:
Adjusts the picture brightness
H POS:
Adjusts the picture's Horizontal
Position
V POS:
Adjusts the picture's Vertical
Position
Clock:
Clock adjustment for focus
Phase:
Phase adjustment for focus
Scale:
Aspect ratio control
OSD (On Screen Display) Adjust menu
H POS:
Adjusts the Horizontal Position of
the On Screen Display
V POS:
Adjusts the Vertical Position of the
On Screen Display
Timeout:
Controls the time the OSD stays
on the display
Background:
Controls transparency of OSD
COLOR MENU
Red:
Adjusts the picture's red color
saturation
Green:
Adjusts the picture's green color
saturation
Blue:
Adjusts the picture's blue color
saturation
Reset:
Resets all values to default values
SYSTEM INFORMATION SCREEN
Source:
Displays what source is connected
Input:
Displays the current Input
resolution
Output:
Displays the current Output
resolution
Version:
Displays the current Firmware
version
9
RMT-SR-IR INSTALLATION
1. Remove battery cover from the back of the RMT-SR-IR remote.
2. Verify that dip switches 1 & 2 are in the down (OFF) position.
3. Insert the battery, hold the battery so that you can see the positive side facing up.
The side that is not marked must be facing down.
4. Test the RMT-SR-IR remote by pressing ONLY one button at a time. The indicator
light on the remote will flash once each time you press a button. WARNING: Do not
press multiple buttons simultaneously and do NOT press buttons rapidly. These
actions will cause the remote to reset and steps 1-4 will have to be repeated.
Note* The RMT-SR-IR ships with two batteries. One battery is required for operation,
the second battery is complimentary.
Note* The remote comes optional and is not included with this package. You can
purchase the remote at an additional expense.
(Optional)
TROUBLESHOOTING
6
No Picture appears on bootup:
If no picture appears on bootup, first reset the VGA to DVI Scaler to the native mode of
the display it is connected to.
Monitors without an internal scaler (Any Apple Display as well as the Dell 30"
monitor) require the VGA to DVI Scaler to output the monitor's exact native resolution
to display a picture. To set the Scaler to the correct resolution, do the following:
1. Reset the scaler to the native resolution of the display by first holding
down the MENU button.
2. While holding the MENU button down remove the power supply from the
scaler.
Note: The MENU button does not work without a source plugged in.
3. Wait 3 seconds and re-plug the power supply to the unit.
4. After you have inserted the power supply, let go of the MENU button.
5. Wait 3 seconds and the scaler will then reset to the displays native
resolution.
6. If you need to start over for any reason, unplug and replug the power on
the VGA to DVI Scaler and then repeat steps 1-5.
How to use the Auto-Adjust:
If for any reason you need to Auto-Adjust the display, you can do so by pressing the
- button once. Give the scaler 3 seconds to Auto-Adjust itself.
1. While the unit is powered on, press the -button with both source and
display connected and powered on as well.
2. Wait three seconds for the unit to adjust itself to the displays optimum
settings.
3. After you have pressed the - button.a small dialog box will appear to
show that you are auto-adjusting the picture. It will disappear when the
scaler is done.
Tabla de contenidos
Otros manuales de Convertidor de medios de Gefen
Gefen
Gefen HDSDI to HDMI Scaler Manual de usuario
Gefen
Gefen VGA-2-ADC Manual de usuario
Gefen
Gefen EXT-DVI-2-HDSDISP Manual de usuario
Gefen
Gefen EXT-UHD600-18 Manual de usuario
Gefen
Gefen EXT-HDMI-2-COMPSVIDSN Manual de usuario
Gefen
Gefen GTB-UHD600-18S-RT Manual de usuario
Gefen
Gefen GTB-HD-1080PSGTB-HD-1080PS-BLK Manual de usuario
Gefen
Gefen HDSDI-2-DVISP Manual de usuario
Gefen
Gefen HDSDI-2-DVI Manual de usuario
Gefen
Gefen HDSDI-2-DVISSL Manual de usuario
Gefen
Gefen HDSDI-2-HDMIS Manual de usuario
Gefen
Gefen GTV-COMPSVID-2-HDMIS Manual de usuario
Gefen
Gefen DVI to RGBS with Scaler EXT-DVI-2-RGBSS Manual de usuario
Gefen
Gefen VGA-2-DVISP Manual de usuario
Gefen
Gefen EXT-DVI-2-VGAN Manual de usuario
Gefen
Gefen GTV-192KUSB-2-ADAUD Manual de usuario
Gefen
Gefen EXT-DVI-2-MDP Manual de usuario
Gefen
Gefen Home Theater Scaler PLUS Manual de usuario
Gefen
Gefen EXT-HDMATE-S Manual de usuario
Gefen
Gefen GTV-HDMI-2-HDMIAUD Manual de usuario
