Geemarc Dallas 30 Manual de usuario

DALLAS 30

MULTIFUNCTION TELEPHONE

CONTENTS 1

INTRODUCTION 3

Unpacking the Telephone 4

DESCRIPTION 5

General Description 5

LCD Display Description 7

INSTALLATION 8

Setting Up 8

Wall Mounting 9

SETTINGS 10

Language Setting 10

Local Area Code Setting 11

PBX Dial Prefix Setting 12

Time Setting 13

Time Break Recall Setting 14

Screen Contrast Setting 15

Tone/Pulse Setting 16

Ringer Volume Setting 16

USING THE TELEPHONE 17

Making a Call 17

Receiving a Call 18

Last Number Redial 18

Recalling Recent Numbers 19

Music On Hold 19

Message Waiting Function 20

Call Timer 20

Battery Low 20

Send Level Volume Adjustment 20

Receive Level Volume Adjustment 20

CALLER DISPLAY 21

Call Counter 22

View Caller Display List 23

Dial a Number from the Caller Display List 23

Delete an Entry from the Caller Display List 24

Delete all Entries from the Caller Display List 24

PHONEBOOK 25

Create a Phonebook Entry 25

Copy an Entry from the Caller Display List to Phonebook 27

Copy an Entry from the Recent Numbers Dialled to Phonebook 27

View Phonebook Entries 28

Dialling using a Phonebook Entry 28

Modify a Phonebook Entry 29

Delete a Phonebook Entry 29

MEMORY 30

Storing a Number in One-Touch Memory 30

View One-Touch Memory Entries 30

Dialling a Number in One-Touch Memory 31

Editing a Number in One-Touch Memory 31

TROUBLESHOOTING 32

SAFETY INFORMATION 33

GUARANTEE 34

RECYCLING DIRECTIVES 36

CONTENTS

Congratulations on purchasing your Geemarc Dallas 30 telephone. This is

a multifunction telephone which offers features such as hands free use,

phonebook and caller display*. It also has the added benefits of send and

receive amplification and a hearing aid compatible receiver.

Its is important that you read the instructions below in order to use your

Geemarc telephone to its full potential. Keep this user guide in a safe

place for future reference.

This guide explains how to use the following telephone:

Dallas 30

*To use the caller display facility, you must subscribe to your network provider’s caller display

service.

Unpacking the Telephone

When unpacking the telephone, you should find the following in the box:

1 Dallas30 unit

1 Dallas 30 handset with curly cord

1Telephone line cord

1 User Guide

For product support and help visit our website at www.geemarc.com

Telephone 01707 384438

Or fax 01707 372529

INTRODUCTION

General Description

DESCRIPTION

LCD Display Description

Standby Display

This LCD display shows the total number of calls and the number of new

calls ready to be reviewed. In this example you have a total of 4 calls

which includes two new calls. The date and time are also displayed.

Caller Display Record *

This LCD display shows the information received and stored when you

receive an incoming call.

Setting Up

Connect the handset. The connector at the end of the curly cord plugs

into the socket on the left hand side of the Dallas 30 unit.

Open the battery compartment. Insert 3 good quality alkaline batteries

(AAA size, 1.5V type, not supplied) into the battery compartment located

on the base of the telephone. Replace the battery cover. If the batteries

are running low, the battery icon will be displayed on the LCD display.

Always ensure that the DALLAS 30 is not connected to the telephone line

and the AC Mains Adaptor (if in use) when installing or changing batteries.

Note : Do not use rechargeable batteries. Do not put batteries into the

household rubbish, pay attention to battery regulations regarding battery

disposal.

Connect the line cord to the socket located at rear of telephone then

connect the plug into the wall socket *.

There is an optionally available Geemarc AC adaptor. This can be used to

prolong the life of the batteries (or replace the need to use any batteries).

This adaptor must have a 9V DC output with a positive polarity centre pin.

Connect the power supply to the socket located at rear of the telephone

then plug into a 13amp wall socket. Please choose a socket near your

telephone socket to enable you to unplug the mains power quickly in case

of a problem.

(*) Classified “hazardous voltage” according to EN60950 standard

(**) Classified TNV-3 according to EN60950 standard.

INSTALLATION

Note:

Battery or mains power are required to power the Phonebook

and Caller Display functions of the telephone. Without battery or mains

power, the telephone can still be used to answer calls or to manually

dial out calls but all stored numbers will be lost.

Caller’s Number and Name

12:00 AM

1/01

-002- -004-

NEW TOTAL

NEW

11:23 AM

7/03

Call 03

01517222277

ROBERT JONES

Time and Date of the Call

New Call

Record Number

DESCRIPTION

Wall Mounting

Make 2 holes in the wall, 83mm apart (use the wall mount template), insert

the wall plugs and the wall mounting screws. The screws should protrude

from the wall by 6-7 mm. Place the phone onto the screw-heads and slide

down to secure.

Handset clip

To ensure that the handset stays firmly in position when the telephone is

wall mounted, turn the handset clip clockwise through 180o.

If you do not wall mount the Dallas 30, it is recommended that the

telephone is placed on a tablecloth or similar as rubber feet can mark

some surfaces.

When using Setting functions, a pause of 5 seconds or more between

pressing buttons results in the telephone returning to standby and any

changes to settings will not be saved.

Language Setting

You can choose between 11 different languages including English and

French.

Press OK for 3 seconds

The telephone enters the Settings mode

‘OPTIONS MENU’

Use or to select ‘SET LANGUAGE’

Press OK to enter the language menu. The current language used

will be displayed on the LCD display

Use or to select language

Press OK to confirm

Wait 5 seconds and the telephone will return to standby

SETTINGS

INSTALLATION

Wall Mounting

Template 83mm

Local Area Code Code Setting

In order for Callback to function correctly, the local area code should be

set.

Press OK for 3 seconds

The telephone enters the Settings mode

‘OPTIONS MENU’

Use or to select ‘LOCAL AREA CODE’.

Press OK to enter the local area code menu. Five blank spaces or

the current local area code setting will be displayed. The first

space/digit will flash.

Use orto select the correct digit. Press OK to move from one

space to another

Press OK to confirm

Wait 5 seconds and the telephone will return to standby

Note: To leave area code blank/unchanged, simply press OK 5 times or

wait 5 seconds and the telephone will return to standby

PBX Dial Prefix Setting

This setting is not required if you are not using the Dallas 30 with a PBX.

Some telephone systems require an access code before dialling the

telephone number e.g. 9. The telephone can be set to automatically insert

a one digit access code and a preset pause when you use a telephone

number from the Caller Display list or memory.

Press OK for 3 seconds

The telephone enters the Settings mode

‘OPTIONS MENU’

Use or to select ‘PBX DIAL PREFIX’.

Press OK to enter the PBX dial prefix menu. Three blank spaces or

the current prefix will be displayed. The first space/digit will flash.

Use or to select the correct digit. Press OK to move from

one space to another

Press OK to confirm

Wait 5 seconds and the telephone will return to standby

Note: If the PBX requires a few seconds pause before getting the dial

tone, use or to select a pause (shown as ‘P’) followed by OK.

A 3 second pause will be inserted after the prefix has been dialled. If the

PBX requires an even longer pause, then you may insert one more pause

in the third space by repeating the procedure above.

Note: To leave prefix blank/unchanged, simply press OK 3 times or wait

5 seconds and the telephone will return to standby

SETTINGS

Time Setting

If you subscribe to a Caller Display service, the date and time will be set

whenever you receive a call. However, if you do not subscribe to this

service, you will need to set the date and time manually.

Press OK for 3 seconds

The telephone enters the Settings mode

‘OPTIONS MENU’

Use or to select ‘SET TIME/DATE’

Press OK

The HOUR digit will flash. Use or to select the correct hour

Press OK to confirm

The MINUTE digits will flash. Use or to select the correct

minute

Press OK to confirm

The MONTH digit will flash. Use or to select the correct

month

Press OK to confirm

The DAY digit will flash. Use or to select the correct day

Press OK to confirm

Wait 5 seconds and the telephone will return to standby

Time Break Recall Setting ‘

Your telephone works with a time break recall for United Kingdom

(R=100ms)

Press OK for 3 seconds

The telephone enters the Settings mode

‘OPTIONS MENU’

Use orto select ‘SET FLASH TIME’

Press OK

Use or to select the correct flash setting (R= 100ms for UK)

Press OK to confirm

Wait 5 seconds and the telephone will return to standby

SETTINGS

Screen Contrast Settings

There are 6 levels of LCD contrast available. This will alter the contrast

between the text on screen against the backlighting.

Press OK for 3 seconds

The telephone enters the Settings mode

‘OPTIONS MENU’

Use or to select ‘LCD CONTRAST’

Press OK

Use or to select the required contrast setting (1-6)

Press OK to confirm

Wait 5 seconds and the telephone will return to standby

Tone/Pulse Setting

In the UK, all telephone exchanges now use Tone dialling. The Tone/Pulse

setting is pre-set to Tone on your telephone.

If your phone does not dial out, it is probably being used from an older

private switchboard (PBX). In this case, the Tone/Pulse setting must be

changed to Pulse.

Press OK for 3 seconds

The telephone enters the Settings mode

‘OPTIONS MENU’

Use or to select ‘SET TONE/PULSE’

Press OK

Use or to select the required setting (Tone or Pulse)

Press OK to confirm

Wait 5 seconds and the telephone will return to standby

Ringer Volume Setting

The switch located on the right side of the Dallas 30 unit allows the

ringer to be switched to LOW, HIGH or OFF.

SETTINGS

If you are using this telephone with a hearing aid, please set your hearing

aid to the <<T>> position

Making a Call

Pick up handset.

When you hear dialing tone, dial the number on the keypad. The

number will be displayed in the middle of the LCD display. The X

button can be used to correct an incorrect entry. The maximum

number of digits that can be dialled out is 32

To end the call simply replace the handset in the cradle

Making a Call – Hands Free

Dial the number on the keypad in the on-hook position. The X

button can be used to correct an incorrect entry

Press and the number will be dialled automatically

When the third party answers the call, you may speak with the

telephone in the hands free mode ( handset in the cradle)

To end the call press 

Note: To deactivate the Hands Free function during a call, lift the handset.

To activate the Hands Free function during the call, press and hold and

replace the handset on the cradle at the same time.

Receiving a Call

When an incoming call is received the telephone rings and the ringer LED

indicator will flash. If the caller can be identified (due to subscription to a

Caller Display service), the caller’s telephone number and name (provided

that the number and name stored are in the phonebook) will be displayed.

The total calls counter increases by 1. If the telephone call is not

answered the new call counter increases by 1 and the new call LED starts

flashing.

Lift the handset and speak

To end the call simply replace the handset in the cradle

Receiving a call – Hands Free

Press to speak hands free

To end the call press 

Last Number Redial

Lift the handset or press for hands free use

Press /P to redial the last number dialled

USING THE TELEPHONE

Tabla de contenidos

Otros manuales de Teléfono de Geemarc

Geemarc

Geemarc Jupiter 4 Manual de usuario

Geemarc

Geemarc Petite Trac Manual de usuario

Geemarc

Geemarc CL60 Manual de usuario

Geemarc

Geemarc CL100 Manual de usuario

Geemarc

Geemarc Jupiter 50 Manual de usuario

Geemarc

Geemarc RP7510 Manual de usuario

Geemarc

Geemarc AmpliPOWER 40 Manual de usuario

Geemarc

Geemarc CL10 Manual de usuario

Geemarc

Geemarc AMPLIPOWER60+ Manual de usuario

Geemarc

Geemarc BDP400 Manual de usuario

Geemarc

Geemarc DALLAS10 Manual de usuario

Geemarc

Geemarc Clearsound CL600 Manual de usuario

Geemarc

Geemarc CL1400 Manual de usuario

Geemarc

Geemarc CL330 Manual de usuario

Geemarc

Geemarc Ampli DECT150 Manual de usuario

Geemarc

Geemarc Jupiter 20 Manual de usuario

Geemarc

Geemarc CL595 Manual de usuario

Geemarc

Geemarc Jupiter 3 Manual de usuario

Geemarc

Geemarc VisoTempo 200 Manual de usuario

Geemarc

Geemarc PARK LANE Manual de usuario

Geemarc

Geemarc CL1100 Manual de usuario

Geemarc

Geemarc SCREENPHONE Manual de usuario

Geemarc

Geemarc ClearSound 100 Manual de usuario

Geemarc

Geemarc MARBELLA Manual de usuario

Manuales populares de Teléfono de otras marcas

GE 2-9480 Manual de usuario

D-Link

D-Link DWR-720/PW Manual de usuario

Interquartz

Interquartz Gemini IQ333 Manual de usuario

SSS Siedle

SSS Siedle HT 840-0 Manual de usuario

Motorola

Motorola TITANIUM Manual de usuario

Panasonic

Panasonic ICX Manual de usuario

LG H870DS Manual de usuario

Samsung

Samsung GT-I9500 Manual de usuario

AT&T

AT&T Trimline 205 Manual de usuario

Selta

Selta zenyth 600 Manual de usuario

Doro

Doro AFTI 20 Manual de usuario

UNIQCELL

UNIQCELL A1 Manual de usuario

Panasonic

Panasonic KX Series Manual de usuario

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manual de usuario

BT Decor 425 Manual de usuario

NEC

NEC SV8500 Manual de usuario

Teledex

Teledex PEARL Manual de usuario

Ericsson

Ericsson Dialog 3213 Manual de usuario