Geemarc Wake'n'Shake Manual de usuario
Large display alarm clock with shake
r
Réveil grand écran avec vibreu
r
Wecker mit Groß-Anzeige und Vibrationskissen
English P1
Français P11
Deutsch P21
1
DESCRIPTION
Snooze key / Flash / Dimmer button
A
larm LED indicato
r
PM LED indicato
r
Shaker Lo / Hi switch
A
larm mode switch
A
larm+ring / Off / Ring
function
A
larm and ring
volume
A
larm tone
Set alarm
Set clock Set hours & minutes
A
larm off for 24H.
(*)Modular jack (*)Shaker jack
(*)Adaptor jack
(*) Classified TVN-3 according to EN60950 standard.
2
1- CONNECTING THE TELEPHONE
1 - Connect the PTT line cord.
2 - At your option you may connect your telephone in
the doubler plug.
3 - Connect the PTT doubler plug in the wall socket.
4 - Connect the adaptor line cord.
5 - Connect the adaptor in the wall socket. (**)
(**)Classified “hazardous voltage” according to EN60950 standard.
Electrical connection: The apparatus is designed to operate at DC9V,
650mA. The power adaptor supplied operate from AC100 – 240V,
50/60Hz input.
The apparatus does not incorporate an integral power on/off switch.
To disconnect the power, either switch off supply at the mains
power socket or unplug the DC adaptor. When installing the
apparatus, ensure that the mains power socket is readily accessible.
Telephone connection: Voltages present on the
telecommunication network are classified TNV-3
(Telecommunication Network Voltage) according to the EN60950
standard.
CONNECTION
(**)230V
PTT plug
DC Adapto
r
Shake
r
3
2- SETTING THE TIME ( )
- Press and hold (set clock) button.
- Press H(hour) and M(minute) until correct hour and
minutes appear on the display.
- Release (set clock) button.
- For p.m. hours, the p.m. indicator will appear on the
display near the inscription PM.
12 / 24 hour format
User can select which hour format to use. To select:
- Press and hold the H(hour) button for 6 seconds to
enter the hour selection mode, the display shows
“12H” or “24H”, then release the hour button.
- Press the H(hour) button to toggle between 12 or 24
hours.
Note: If no selection made within 4 seconds, the last
showed format will be chosen, and the clock will return
to normal time mode.
3- SETTING THE ALARM TIME ( )
- Press and hold (set alarm) button.
- Press H(hour) and M(minute) until correct hour and
minutes appear on the display.
- Release (set alarm) button.
- Press , Hand Mto reset the alarm clock to 12.
SETTING
4
4- SETTING THE ALARM MODE
Put the function switch on A+T position.
Choose which alarm mode you wish to be awakened to
by moving the alarm mode switch to one of the following
selections:
V : only shaker activated
V+S : both sound and shaker alarm activated
V+F : both strobe light and shaker alarm activated
V+F+S: strobe light, sound and shaker alarm activated
Note: if user doesn’t use the V(shaker function), please
unplug the shaker plug from the clock.
When the alarm is set to one of the alarm modes, the
alarm indicator will appear on the display near the
inscription AL.
The table below shows how the alarm modes indicate
an incoming call from the alarm clock.
SETTING
5
ALARM MODE ACTION ALARM CLOCK INCOMING CALL
SOUND Buzzer With pauses With pauses
SHAKER Vibrates With pauses With pauses
STROBE LIGHT Flashes With pauses With pauses
The default alarm duration time is 30 minutes. User can
adjust the alarm duration time from 1-59 minutes.
To adjust the alarm duration:
- Press and hold the set alarm button for 6
seconds to enter adjust mode. The clock show “30”,
release the set alarm button.
- Press the Mbutton to adjust the alarm duration time to
the desired setting from 1 minute to 59 minutes.
- This new setting will become the new default, until
changed by user.
- If no action is take within 3 seconds, then the clock will
return to normal time mode.
SETTING
6
5- SNOOZE KEY ( )
When the alarm mode you have chosen is switched on
the alarm time setting, pressing the button will stop
the alarm mode for approximately 9 minutes. The alarm
will then switch the alarm mode o again for a further 9
minutes. This sequence can be carried out for up to 59
minutes after which the alarm mode will be automatically
switched off.
User can adjust the snooze repeat time from 1-30
minutes.
- Press and hold the SNOOZE button for 4 seconds to
enter the snooze time adjust mode. When the clock
show “9” release the Snooze button.
- Press the Mbutton to adjust the snooze time to the
desired setting from 1 minute to 30 minutes.
This new setting will become the new default, until
changed by user. If no action is take within 3 seconds,
then the clock will return to normal time mode.
6- SWITCHING THE ALARM OFF FOR 24H.
(OFF)
Press the alarm off button (OFF), the alarm will then
operate at the same time the next day. The alarm if not
switched off will continue to sound for up to 59 minutes
and then be automatically switched off.
SETTING
7
7- RINGER On/Off SWITCH ( A+T / OFF / T )
- A+T (alarm + telephone): for the alarm and telephone
ring position.
- OFF: alarm and ring off.
- T(telephone): for the telephone ring position.
8- TELEPHONE OPERATION
- Ensure that the telephone has been set up in
accordance with the telephone userguide and has
been connected as shown in the installation section.
- Select the ringer On/Off switch on the A+T or T
position for the ring.
- Choose which of the alarm modes you wish to alert
you of your incoming telephone calls (see page 4: V,
V+S, V+F, V+S+F).
- When the alarm mode selected indicates there is an
incoming telephone call, lift the telephone handset and
answer the call. When you have finished the call
replace the handset and the alarm will be ready to
indicate the next call.
9- Dimmer Function ( )
There is a 5-level brightness control for the LED display.
In normal time model, press the Snooze button once to
change the display brightness. The brightness will cycle
from bright to dim then from dim to bright (the cycle
repeats)
NOTE : The dimmer function will not work when the
clock is in snooze mode.
SETTING
8
10- VOLUME ( VOLUME )
Sets the volume of the ring and the alarm sound.
11- TONE ( TONE )
Sets the tone of the alarm sound.
12- SHAKER SWITCH ( + _)
Sets the motion of the shaker to Lo (-) or Hi (+).
13- BATTERY BACK- UP
It’s not necessary to insert a battery for the clock to
function. With battery back-up installed, the clock will
keep the time and alarm settings in the event of a power
cut or the DC adaptor being unplugged.
Check the battery condition after one year, replacing old
battery. A leaking battery can destroy your clock.
SETTING
9
GUARANTEE
From the moment your Geemarc product is purchased,
Geemarc guarantee it for the period of one year.
During this time, all repairs or replacements (at our
option) are free of charge.Should you experience a
problem then contact our helpline or visit our website at
www.geemarc.com. The guarantee does not cover
accidents, negligence or breakages to any parts. The
product must not be tampered with or taken apart by
anyone who is not an authorised Geemarc
representative.The Geemarc guarantee in no way
limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR
GUARANTEE AND MUST BE RETAINED AND
PRODUCED IN THE EVENT OF A WARRANTY CLAIM.
Please note: The guarantee applies to the United
Kingdom only.
Declaration: Hereby Geemarc Telecom SA declares
that this product is in compliance with the essential
requirements and other relevant provisions of the Radio
and Telecommunications Terminal Equipment Directive
1999/5/EEC and in particular article 3 section 1a, 1b and
section 2.
The declaration of conformity may be consulted
at www.geemarc.com
Caution: Radio frequency interference may cause
discernible sound on the unit. The sound will end when
the interference stops.
GUARANTEE
Otros manuales para Wake'n'Shake
1
Tabla de contenidos
Idiomas:
Otros manuales de Despertador de Geemarc
Geemarc
Geemarc Wake and Shake Manual de usuario
Geemarc
Geemarc VISO10 – MSF Manual de usuario
Geemarc
Geemarc Wake 'n' Shake Voyager Manual de usuario
Geemarc
Geemarc Viso 50 Manual de usuario
Geemarc
Geemarc Wake 'n' Shake Voyager V2 Manual de usuario
Geemarc
Geemarc Wake 'n' Shake Star Manual de usuario
Geemarc
Geemarc Wake 'n' Shake Spot Manual de usuario
Geemarc
Geemarc Viso 20 Manual de usuario
Geemarc
Geemarc Large Display Alarm Clock Manual de usuario
Geemarc
Geemarc Wake 'n' Shake Vintage Manual de usuario
