GE EasyCam Pro Manual de usuario
1
For technical support, contact Jasco
Products Company at 1-800-654-8483
or www.jascoproducts.com 98669
EasyCam Pro™
2
Table of Contents
1 How To Install and Use The PC Camera.................................................... 3
1.1 Use Installer to install camera driver................................................................... 3
1.2 How to Use Your PC Camera............................................................. 3
1.3 Special Effects and Face Tracking..................................................... 4
1.4 Anti-Flicker Setting................................................................................ 7
2 Getting Started With MediaImpression...................................................... 9
3 Getting Started with MSN® Messenger.................................................... 14
4 Minimum System Requirements................................................................ 14
5. Two Year Limited Warranty .……………………………….……………15
6. FCC Statement ……….……...……………………………….……………15
USB PC Camera
User’s Manual
3
1How To Install and Use The PC Camera
There are two ways to install Camera Driver:
1.1 Use Installer to install camera driver
Don’t connect the camera to your computer yet!
1.1.1 Install Driver
Insert the CD into your CD-ROM drive; the installer screen will automatically come
up. Click the "Install Device Driver" button to start installing.
Note #1: If the installer screen does not come up automatically, click Start,then Run and
execute the file “launch.exe” on the CD to start theinstaller program.
1.2 How to Use Your PC Camera
1.2.1 Plug Webcam’s cable to the USB port on your computer.
1.2.2 Start MediaImpression
(1)Select “WebCam”.
(2)Select “Make Movie”
4
1.3 Special Effects and Face Tracking
1.3.1 Activate your Webcam and open the Property page.
1.3.2 Open the Property page (take ArcSoft MediaImpression as an example):
(1) Close any active video browsing software
(2) Open ArcSoft MediaImpression
(3) Select“WebCam”and the following figure appears:
(4) Click “WebCam” Settings” to open the Property page for adjustment.
5
1.3.3 Select the “Effects_Frame” page to add special effects.
6
1.3.4 Select the “Face Tracking” page to enable face tracking.
7
1.4 Anti-Flicker Setting
When the flickers, the rolling horizontal (vertical) bands, appear on the screen, change the power
frequency setting.
Note:
Set 50Hz or 60Hz according to your region.
50Hz : Europe, Australia, Africa, Asia, China and Japan(East).
60Hz: America, Taiwan, Korea and Japan(West).
8
Anti-Flicker setting:
1.4.1 Open the Property page (refer to installation guide 1.3.3)
1.4.2 After opening Stream Property, select 50Hz or 60Hz in the “Flicker” option.
9
2. Getting Started With MediaImpression
Start MediaImpression
Select “WebCam”
10
This module makes it easy for you to capture still images and video directly from your webcam.
Before capturing, you may want to adjust the capture settings, webcam settings, and
snapshot/video resolution according to your requirements.
Capture a still image by clicking the "Capture" button. Capture a group of images in burst mode
by clicking the "Burst" button. Capture a video clip by clicking "Record Video" and then "Stop
Recording."
Settings
Allows you to adjust your capture settings, such as video device, burst number, audio device
and audio input, etc
WebCam Settings
Allows you to adjust your webcam related preferences, such as brightness, contrast, hue and
saturation, etc
Connect
Connect your webcam. (This icon is displayed when your webcam is not connected.)
Disconnect
Disconnect your camera. (This icon is displayed when your webcam is connected.)
Tabla de contenidos
Otros manuales de Cámara web de GE
GE
GE HO98067 MiniCam Pro Manual de usuario
GE
GE UltraCamTM HQ98073 Manual de usuario
GE
GE EasyCam Twin HO98068 Manual de usuario
GE
GE 98046 MiniCam Pro Manual de usuario
GE
GE MINICAM PRO HO98756 Manual de usuario
GE
GE 98061 Manual de usuario
GE
GE Easy Cam Pro Manual de usuario
GE
GE 98068 Manual de usuario
GE
GE Flat Panel Web Camera 98656 Manual del propietario
GE
GE 98090 Manual de usuario
