GE 20F110TEWX Manual de usuario

Television User's Guide

Important Information

RiSKOFELECTRICSHOCK

DONOTOPEN

This symbol indicates that this product incorporates double

insulation between hazardous mains voltage and user

accessible parts. When servicing use only identical

replacement parts.

Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable

parts inside, Refer servicing to qualified service personnel.

_, This symbol indicates important A This symbol indicates "dangerous voltage" inside the

instructions accompanying the _,_ product that presents a risk of electric shock or

product, personal injury.

WARNING

To reduce the risk of fire or electric shock,

do not expose this product to rain or

moisture,

The apparatus shall not be exposed to

dripping or splashing and that no objects

filled with liquids, such as vases, shall be

placed on the apparatus.

Refer to the identification/rating label located on the

back panel of your product for its proper operating

voltage.

FCC Regulations state that unauthorized changes or

modifications to this equipment may void the user's

authority to operate it,

Caution: Using video games or any external accessory

with fixed images for extended periods of time can

cause them to be permanently imprinted on the

picture tube (or projection TV picture tubes). ALSO,

some network/program Iogos, phone numbers, etc.

may cause similar damage. This damage is not covered

by your warranty.

Cable TV Installer: This reminder is provided to call your

attention to Article 820-40 of the National Electrical

Code (Section 54 of the Canadian Electrical Code, Part

1) which provides guidelines for proper grounding and,

in particular, specifies that the cable ground shall be

connected to the grounding system of the building as

close to the point of cable entry as practical,

Product Registration

Please fill out the product registration card (packed separately) and return it immediately, For U,S,

customers: Your GE Consumer Electronics product may also be registered at www.home-etectronics,net/

productregistration, Registering this product allows us to contact you if needed.

Product Information

Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here

and record the serial and model numbers, These numbers are located on the product.

Model No. Serial No. Purchase Date:

Dealer/Address/Phone:

Table of Contents

Chapter 1: Connections & Setup

Things to Consider Before You Connect ....................................................................... 3

Protect Against Power Surges ........................................................................... 3

Protect Components from Overheating ........................................................... 3

Position Cables Properly to Avoid Audio Interference .................................... 3

Important Stand and Base Safety Information ................................................ 3

Use Indirect Light ............................................................................................... 3

Cables Needed to Connect Components to Your TV ....................................... 3

TV + DVD.......................................................................................................................... 4

Fxplanation of Jacks ....................................................................................................... 5

The Front of Your TV ...................................................................................................... 6

Front Input Jacks ................................................................................................ 6

Front Panel Buttons ........................................................................................... 6

Plug in the TV .................................................................................................................. 6

Put batteries in the remote ........................................................................................... 6

How to Use the Remote Control to Complete the Initial Setup ................................ 7

Turn on the TV................................................................................................................. 7

Complete the Initial Setup ............................................................................................. 7

Complete Auto Channel Search ........................................................................ 7

The Buttons on the Remote Control ............................................................................. 8

Using the INPUT Button ..................................................................................... 8

Chapter 2: Using the TV's Features

Channel Banner ............................................................................................................... 9

Why You Should Use the Auto Tuning Feature ........................................................... 9

How to Set Up the Auto Tuning Feature .......................................................... 9

Parental Controls and V-Chip ..................................................................................... 10

How V-Chip Works ........................................................................................... 11

USA V-Chip Rating System ............................................................................... 11

Canadian English V-Chip Rating System ......................................................... 12

Canadian French V-Chip Rating System .......................................................... 13

USA V-Chip TV Rating Limit ............................................................................. 13

Blocking Specific Content Themes .................................................................. 15

Viewing Specific Content Themes ................................................................... 15

Blocking Canadian V-Chip Ratings .................................................................. 16

V-Chip Movie Rating Limit ............................................................................... 16

V-Chip Exempt Program Block ......................................................................... 16

V-Chip Active .................................................................................................... 17

Front Panel Lock ............................................................................................... 17

Change Password ............................................................................................. 17

Table of Contents

Chapter 3: Using the TV's Menu System

Sound Menu .................................................................................................................. 18

Picture Menu ................................................................................................................ 18

Setup Menu .................................................................................................................. 19

Parental Control Menu ................................................................................................ 20

Time Menu .................................................................................................................... 20

Chapter 4: Other Information

Troubleshooting ............................................................................................................ 21

Care and Cleaning ........................................................................................................ 23

Limited Warranty ......................................................................................................... 24

Things to Consider Before You Connect

Protect Against Power Surges

Connect all components before you plug any of their power cords into the wall outlet,

]urn off the TVand/or component before you connect or disconnect any cables,

Make sure all antennas and cables are properly grounded, Refer to the Important Safety Instructions

packed separately.

Protect Components from Overheating

Don't block ventilation holes on any of the components. Arrange the components so that air can

circulate flee[y.

Don't stack components.

If you place components in a stand, make sure you allow adequate ventilation,

If you connect an audio receiver or amplifier, place it on the top shelf so the heated air from it won't

flow around other components.

Position Cables Properly to Avoid Audio Interference

Insert each cable firmly into the designated jack,

If you place components above the TV, route all cables down the side of the back of the TV instead

of straight down the middle of the TV.

If your antenna uses 300-ohm twin lead cables, do not coil the cables, Also, keep the twin lead

cables away from audio/video cables.

Important Stand and Base Safety Information

Choose the location for your TV carefully, Place the TV on a stand or base that is of adequate size and

strength to prevent the TVfrom being accidentafly tipped over, pushed off, or pulled off. This could

cause personal injury and/or damage the TV. Refer to the important Safety Instructions packed

separately.

Use Indirect Light

Don't place the TVwhere sunlight or room lighting will be directed toward the screen. Use soft or

indirect lighting,

Cables Needed to Connect Components to Your TV

The pictures below show the cables needed for the connections represented in this book.

Coaxial cable S Video cable Audio/Video cables

Chapter 1 Graphics contained within this publication are for representation only 3

Connections & Setup

TV (back panel)

_ _ _ANTEBNA R&B_ B_

":"

TV + DVD

1. Connect your DVD Player to your TV.

A. Connect the audio (white and red) cables to the R and LAUDLOjacks on the back of the TVand

to the Audio Output jacks on the DVD player,

B. If your DVD player has an S-Videojack, connect an S-Video cable to the S-VlDEOjack on the

back of the TV and to the S-Videojack on the DVD player. If your DVD player doesn't have an

S-Video jack, go to C.

-OR-

C. Connect a video cable (yellow) to the VIDEOjack on the back of the TV and to the Video Output

Jack on the DVD player.

2, Make sure cable or antenna is connected to your TV,

Connect the coaxial cable from your cable outlet or antenna to the ANTENNA jack on your TV,

Go to page 6

4Graphics contained within this publication are for representation only Chapter 1

Connections & Setup

Explanation of Jacks

This section describes the jacks you can use to make connections. There are several

ways to connect components to your TV,

ANTENNA Lets you connect a coaxial cabie to receive the signal from the

antenna, cable, or cable box.

III

AUDIO VIDEOS-VIDEO

R L

AUDIO/VIDEO IN Lets you connect a component such as a

VCR, DVD player, or laserdisc player.

R (Right) AUDIO Provides right audio connection. The

right audio connector is usually red,

L (Left mono) AUDIO Provides left audio connection.

The left audio connector is usually white.

VIDEO Provides composite video connection. The video

connector is usually yellow,

S-VIDEO Provides better picture quality than the video

jacks because the color part of the signal is separated

from the black and white part of the picture. When using

S-ViDEO, make sure to connect left and right audio

cables to the R and L AUDIO jacks.

Chapter 1 Graphics contained within this publication are for representation only 5

Connections & Setup

The Front of Your TV

Front Input Jacks

The TV has one set of front audio/video input jacks for your convenience. These

`jacks are on the front of the TV. To access the component you connected to the

front of the TV,press the INPUT button on your remote until FRNTappears on the

screen. Thejacks are ideal for connecting a video game console or a camcorder.

No_e:Whonconnec£n_g_,,componentd_atonly hasonc,audiojack, surh assomocamcorders,

u_ethe TV'sAUDIOL/MONOjac_to hr,artheaudio

VIDEO Receives video from another component such as a VCR, camcorder, or

video game console.

UMONO and R AUDIO Receives audio from another component such as a VCR,

camcorder, or video game console,

Front Panel Buttons

If you cannot locate your remote, you can use the buttons on the front of your TV

to operate many of the TV's features,

MENU/OK Brings up the Main menu. In the menu system, it selects highlighted

items,

CH- Scans down through the current channel list. In the menu system, acts like

the down arrow button on the remote control and adjusts menu controls,

CH+ Scans up through the channel list. In the menu system, acts like the up

arrow button on the remote control and adjusts menu controls.

VOL- Decreases the volume, tn the menu system, acts like the left arrow button

on the remote control and adjusts menu controls.

VOL+ Increases the volume. In the menu system, acts like the right arrow button

on the remote control and adjusts menu controls.

POWER Turns the TVon and off.

Plug in the TV

Plug the end of the power cord into a grounded wall outlet. Insert the plug

completely into the outlet.

Put batteries in the remote

Remove the battery compartment cover from the back of the remote by

pushing down on and sliding off the cover.

Insert 2 "AAA" fresh batteries. Make sure the polarities (+ and -) are aligned

correctly.

Replace the cover.

6Graphics contained within this publication are for representation only. Chapter 1

Connections & Setup

_- Arrows

button

How to Use the Remote Control to Complete

the Initial Setup

The technical term is "Navigation" - how you move through

the on-screen menus. The method is the same throughout

the menu screens: highlight your choice and select it.

To highlight a menu item, press the arrow buttons on the

remote to highlight one of the items listed on the screen. Use

the up or down arrow button to move up or down. Use the

right or left arrow button to move right or left,

To select the item that you've highlighted, press OK,

Note,H_ghhghtedmeansthat the menu itemstand_out from other

menu immsonthehst (appearsdarke_brighter,or adfffc,mntco/u_)

Turn on the TV

PressON.OFFontheremote,or pressPOWERon theTV's

front panel

Complete the Initial Setup

The menu system in your TVallows the [V's features to work

properly. The first time you turn on your TV,the SETUPscreen

appears with Language highlighted. The default language is

English. To choose another language, press the right arrow

button on the remote.

Complete Auto Channel Search

This part of the setup allows the TV to search for all channels

viewable through your antenna or cable TV system. This is

sometimes catted auto programming,

1, Highlight Auto Ch. Search and press OK.

2. The Signal Type option is set to Cable. To change the

option to Antenna, press the right arrow button and then

press OK.

3. Press the down arrow button to highlight Start. PressOK

to begin the auto channel search.

Once the search is complete, you can begin watching TV. For

information on customizing your channels or menu options,

go to Chapter 3.

Chapter 1 Graphics contained within this publication are for representation only 7

Connections & Setup

ON=OFF

PRESETS SKIP

CC INFO

SLEEP

iNPUT

The Buttons on the Remote Control

(0-9) Number Buttons Enter channel numbers and time

settings directly through the remote control,

To enter a one-digit channel, enter a zero first, To enter a

two-digit channel, press the two digits and expect a few

seconds delay, This is if you want to enter a third digit,

Arrows Used to highlight to different items in the TV menu

and to adjust the menu controls,

CC Toggles closed captioning on and off,

CH + or CH - Scans up or down through the current

channel list, Press once to change the channel up or down;

press and hold to continue changing channels,

CLEAR Removes any menu or display from the screen and

returns you to normal viewing,

GO BACK Returns you to the previous channel,

INFO Brings up channel banner,

INPUT Toggles through the available input sources (V/D,

5VID, FRNT and current channel),

MENU Brings up the Main menu,

MUTE Reduces the TV's volume to its minimum level, Press

again to restore the volume,

OK When in the menu system, selects highlighted items,

ON,OFF Turns the TVon and off,

PRESETS Brings up sound and picture presets,

SKIP Press once before changing channels and the TV will

wait 30 seconds before returning to the original channel,

Press repeatedly to add more time,

SLEEP Sets the TVto turn off, Each time you press SLEEP

the clock adds 15 minutes (up to four hours), To cancel,

continue to press SLEEP until you reach g,

VOL - or VOL + Decreases or increases the TV's volume,

Using the INPUT Button

Use the INPUT button to scroll through the available video

input channels and view components you have connected to

the TV,

1, Make sure the component you want to view is turned ON.

2, Press INPUT to tune to an available video input source

and view the component,

3, To return to the previous channel, continue pressing

INPUT.

8Graphics contained within this publication are for representation only Chapter 1

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de TELEVISOR de otras marcas

Philips

Philips Colour Television Manual de usuario

Toshiba

Toshiba 27A10 Manual de usuario

Philips

Philips 42PF9630A/37 Manual de usuario

Hitachi

Hitachi 32FX48B Manual de usuario

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manual de usuario

Changhong Electric

Changhong Electric uhd55b6000is Manual de usuario

Philips

Philips Matchline 21CE7551 Manual de usuario

Panasonic

Panasonic Genus TX-G10 Manual de usuario

Toshiba

Toshiba 19A20 Manual de usuario

Philips

Philips 25PT4523-16 Manual de usuario

Sony

Sony XBR-100Z9D Manual de usuario

Philips

Philips PR0930X3 Manual de usuario

Philips

Philips Brilliance 231P4QPY Manual de usuario

Samsung

Samsung 55S9 B Series Manual de usuario

Philips

Philips 32HF9385D Guía de solución de problemas

Sharp

Sharp LC-40FI5012E Manual de usuario

Loewe

Loewe Table Stand Reference 55 Manual de usuario

Philips

Philips 32PFH5300 Manual de usuario