GE 29582 Manual de usuario
Model 29582
Digital Answerer with
Call Waiting Caller ID and
Speakerphone Telephone
User’s Guide
2
Important Information
NOTICE: This product meets the applicable Industry Canada technical specications.
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This
device must accept any interference, including interference that may cause undesired operation of the
device.
The equipment must be installed using an acceptable method of connection. The customer should
be aware that compliance with the above conditions may not prevent degradation of service in some
situations.
Repairs to certied equipment should be made by an authorized Canadian maintenance facility designated
by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions,
may give the telecommunications company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power
utility, telephone lines and internal metallic water pipe systems, if present, are connected together. This
precaution may be particularly important in rural areas.
CAUTION: Users should not attempt to make such connections themselves, but should contact the
appropriate electric inspection authority, or electrician, as appropriate.
NOTES: This equipment may not be used on coin service provided by the telephone company.
Interference Information
This equipment generates and uses radio frequency energy which may interfere with residential radio and
television reception if not properly installed and used in accordance with instructions contained in this
manual. Reasonable protection against such interference is ensured, although there is no guarantee this
will not occur in a given installation. If interference is suspected and veried by switching this equipment on
and off, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient the radio/television receiver’s antenna, relocate the equipment with respect to the receiver, plug
the equipment and receiver into separate circuit outlets. The user may also wish to consult a qualied
radio/television technician for additional suggestions. This equipment has been fully tested and complies
with all limits for Class B computing devices pursuant to part 15 FCC Rules and Regulations.
Telephone Network Information
Should your equipment cause trouble on your line which may harm the telephone network, the telephone
company, where practicable, may notify you that temporary discontinuance of service may be required.
Where prior notice is not practicable and the circumstances warrant such action, the telephone company
may temporarily discontinue service immediately.
The telephone company may make changes in its communications facilities, equipment, operations or
procedures where such action is required in the operation of its business. If these changes are expected
to affect the use or performance of your telephone equipment, the telephone company will likely give you
adequate notice to allow you to maintain uninterrupted service.
Notice must be given to the telephone company upon termination of your telephone from your line.
REN Number
On the bottom of this equipment is a label indicating, among other information, the Ringer Equivalence
Number (REN) for the equipment.
The REN is useful in determining the number of devices you may connect to your telephone line and still
have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of
the RENs of all devices connected to one line should not exceed 5. To be certain of the number of devices
you may connect to your line as determined by the REN, you should contact your local telephone company.
REN Number is located on the cabinet bottom.
Hearing Aid Compatibility
This telephone system meets FCC standards for Hearing Aid Compatibility.
Licensing
Licensed under US Patent 6,427,009.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the
radiator and your body. This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
Table of Contents
Important InformatIon .................................2
Interference InformatIon .............................2
telephone network InformatIon .................3
ren number ...............................................3
hearIng aId compatIbIlIty ............................3
lIcensIng .....................................................3
fcc rf radIatIon exposure statement ........3
IntroductIon ...............................................6
before you begIn ........................................6
Parts CheCklist .................................................6
telePhone JaCk requirements.........................6
Important InstallatIon InformatIon .............7
base layout .................................................8
InstallIng the phone ....................................9
DesktoP installation ........................................9
Wall mounting the Phone ..........................10
imPortant instruCtions for moving the
ansWerer: ........................................................11
answerIng system set up ..........................11
reCorDing the greeting ...........................11
telephone set up ......................................12
setting Your loCal area CoDe ...................12
setting the DisPlaY Contrast ......................13
setting the time anD Date ............................13
setting the inComing message length ......14
setting the reCorDing qualitY ..................15
setting the rings to ansWer .......................15
toll saver .......................................................15
setting the seCuritY CoDe ...........................16
setting the Dialing moDe ............................16
message volume.............................................17
ringer volume ................................................17
hanDset volume.............................................17
sPeakerPhone volume ...................................17
telephone operatIon .................................17
using the sPeakerPhone ...............................17
sPeakerPhone loCation ............................17
sPeakerPhone use .....................................18
reCeiving a Phone Call.................................18
PlaCing a Phone Call ...................................18
sWitChing betWeen sPeakerPhone anD
hanDset ......................................................18
temPorarY tone Dialing ...............................19
flash ................................................................19
reDial ...............................................................19
mute .................................................................19
answerer operatIon ..................................20
Call ansWering ..............................................20
auto DisConneCt ............................................20
PlaYing messages ...........................................20
erase messages ..............................................21
leaving a memo ..............................................21
memorY full ...................................................22
remote aCCess ................................................22
remote aCCess CommanDs .......................23
caller Id features ....................................23
summarY sCreen .............................................23
Caller iD With Call Waiting .......................24
reCeiving anD storing Calls ........................24
revieWing Call reCorDs ...............................24
erasing Caller iD info .................................24
Dialing baCk ...................................................25
5
memory .....................................................26
storing a number in memorY .....................26
storing Caller iD reCorDs ..........................27
inserting a Pause in the Dialing sequenCe 27
Changing a storeD number .........................27
Dialing a storeD number .............................28
Dialing a quiCk Dial number ......................28
revieWing storeD numbers ..........................28
Chain Dialing from memorY ........................29
message IndIcators ....................................29
troubleshootIng guIde ..............................30
general product care ..............................32
warranty ..................................................33
Index .........................................................34
Table of Contents
Introduction
CAUTION: When using telephone equipment, there are basic
safety instructions that should always be followed. Refer to the
IMPORTANT SAFETY INSTRUCTIONS provided with this product and
save them for future reference.
Before You Begin
Parts Checklist
Make sure your package includes the following items:
Base AC power adaptor Handset
Coiled cord Mounting bracket Line cord
Telephone
line jack
Wall plate
Telephone Jack Requirements
To use this phone, you need an RJ11C type modular telephone
jack, which might look like the one pictured here, installed in your
home. If you don’t have a modular jack, call your local phone
company to nd out how to get one installed.
Important Installation Information
• Never install telephone wiring during a lightning storm.
• Never touch non-insulated telephone wires or terminals, unless the telephone line has
been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Never install telephone jacks in wet locations unless the jack is specically designed for
wet locations.
8
Base Layout
delete (button)
memo (button)
store (button)
menu (button)
ans on/off
(answer on/off
button)
announce (button)
VOL+/-
(volume +/-
buttons)
ash/exit (button)
redial/pause
(button)
skip (button)
Microphone
PLAY/STOP (button)
repeat (button)
dial (button)
* tone (button)
message speed
(button)
display mute (button)
Quick dial/emergency
memory (buttons) SPEAKERPHONE (button)
9
Installing the Phone
Desktop Installation
CAUTION: To reduce risk of personal injury, re, or damage use
only the 5-280 (white) or 5-280 (black) power adaptor listed in
the user’s guide. This power adaptor is intended to be correctly
orientated in a vertical or oor mount position.
1. Plug the coiled cord into the handset. Plug the other end into the jack on the side of the
base.
2. Place the handset in the base.
3. Plug the telephone line cord into
the LINE jack on the back of the
phone. Plug the other end into a
wall jack.
4. Connect the small end of the
power adaptor into the POWER
7.5V AC jack on the back of the
answerer. Plug the other end into
an AC power outlet. The screen
displays PLEASE WAIT....., then announces “Press menu key to set up the unit”. The unit
is ready for setup or to answer calls with the default greeting and settings.
NOTE: The phone automatically defaults to touch-tone dialing. To
change to pulse (rotary) dialing, see “Setting the Dialing Mode.” If
you don’t know which type of service you have, check with the phone
company.
NOTE: The unit is properly installed if you pick up the handset and hear
the dial tone. Otherwise, recheck all the installation steps.
1
2
3
4
10
Wall Mounting the Phone
1. To prepare for wall mounting, wrap excess
telephone cord, if any, around the hooks provided
on the wall mount bracket. Be sure to leave
enough cord for connecting to the base at the top
and the wall jack through the center cut out of the
wall bracket.
2. Plug the line cord into the jack of the base.
3. Align the line cord with the small cut out in the wall
mount bracket.
4. Align and inset the two sets of small tabs of the
wall mount bracket into the base at the top. Then gently press into the two sets of
bottom grooves until it snaps in place.
5. Connect the small end of the power adapter into the POWER 7.5V AC jack on the back
of the answerer. Secure the cord of the power adapter in the groove on the wall mount
bracket.
6. Carefully turn the handset hook180 with a coin or screwdriver until it points upward
(the WALL imprint will be right side up). You need to do this so the at the handset
doesn’t fall out of the base.
7. Connect the line cord to the wall phone jack, through the center cutout of the wall
mounting bracket.
8. Slip the mounting of the base (on bottom of unit) over the wall plate post and slide the
base down until the phone is rmly in place.
9. Plug one end of the coiled cord into the handset. Plug the other end into the jack on
the side of the base.
10. Place the handset on the base.
11. Plug the AC Power adapter into an AC power outlet. The screen displays PLEASE
WAIT… then announces: “Press menu key to set up unit”. The unit is ready for
Answering System Set Up.
Otros manuales para 29582
1
Tabla de contenidos
Idiomas:
Otros manuales de Teléfono de GE
GE
GE 2-9315 Manual de usuario
GE
GE 29460 Manual de usuario
GE
GE 28225 Series Manual de usuario
GE
GE 29115 Series Manual de usuario
GE
GE 2-9451 Manual de usuario
GE
GE EX30014 Manual de usuario
GE
GE 29488 Manual de usuario
GE
GE DECT 0005374 Manual de usuario
GE
GE 29297GE3 Manual de usuario
GE
GE 2-9120/30 Manual de usuario
GE
GE InfoLink 28320 Manual de usuario
GE
GE 27881FE2 Manual de usuario
GE
GE 29897GE2 Manual de usuario
GE
GE 2-9220 Manual de usuario
GE
GE 25922EE1 Manual de usuario
GE
GE 21825 Manual de usuario
GE
GE 25467 Manual de usuario
GE
GE 25982 Manual de usuario
GE
GE 29267GE1 Manual de usuario
GE
GE VERTICAL ZONELINE 2010 Manual de usuario
