GE SymVeo SV-XP1 Manual de usuario
GE
Security
SymVeo SV-XP1
User Manual
Copyright Copyright © 2005, GE Security Inc. All rights reserved.
This document may not be copied in whole or in part, or otherwise reproduced
except as specifically permitted under US copyright law, without the prior
written consent from GE.
Document number/revision: 0150-0305C.
Disclaimer The information in this document is subject to change without notice. GE, in
keeping pace with technological advances, is a company of product innovation.
Therefore, it is difficult to ensure that all information provided is entirely accu-
rate and up-to-date. GE accepts no responsibility for inaccuracies or omissions
and specifically disclaims any liabilities, losses, or risks, personal or otherwise,
incurred as a consequence, directly or indirectly, of the use or application of any
of the contents of this document.
This publication may contain examples of screen captures and reports used in
daily operations. Examples may include fictitious names of individuals and
companies. Any similarity to names and addresses of actual businesses or
persons is entirely coincidental.
Trademark
notices
Symveo IP Camera product and logo are trademarks of GE Security.
Xposure is a trademark of GE Security.
GE and the GE logo are registered trademarks of General Electric.
Other trade names used in this document may be trademarks or registered
trademarks of the manufacturers or vendors of the respective products.
Software
license
agreement
GE software supplied with GE products is proprietary and furnished under
license and can be used or copied only in accordance with the license terms.
THE ENCLOSED PROGRAM IS FURNISHED SUBJECT TO THE TERMS AND CONDI-
TIONS OF THIS AGREEMENT. RETENTION OF THE PROGRAM FOR MORE THAN 30
DAYS, OPENING OF THE SEALED WRAPPER, IF ANY, SURROUNDING THE
PROGRAM, OR USE OF THE PROGRAM IN ANY MANNER WILL BE CONSIDERED
ACCEPTANCE OF THE AGREEMENT TERMS. IF THESE TERMS ARE NOT ACCEPT-
ABLE, RETURN THE UNUSED PROGRAM AND ANY ACCOMPANYING DOCUMENTA-
TION TO GE FOR A FULL REFUND OF THE LICENSE FEE PAID. (FOR INFORMATION
REGARDING THE RETURN OF PROGRAMS ENCODED OR INCORPORATED WITHIN
EQUIPMENT, CONTACT THE NEAREST GE SALES OFFICE.)
Intended use Use this product only for the purpose for which it was designed; refer to the
data sheet and user documentation. For the latest product information, contact
your GE sales representative or visit us online at www.gesecurity.com.
FCC
compliance
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful inter-
ference to radio communications.
You are cautioned that any changes or modifications not expressly approved
by the party responsible for compliance could void the user's authority to
operate the equipment.
iii
Regulatory
Operation of this equipment in a residential area may cause interference, in
which case the user is required to take all measures that are necessary, at the
user's expense, to correct the interference
Contact Direct all inquiries about GE’s legal policies with regard to this product to:
Director of Legal Services
GE Security
4575 SW Research Way, Suite 250
Corvallis, OR 97333 USA
Symveo IP Camera
User Manual
iv
iii
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Conventions used in this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety terms and symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Other required equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Making power connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Attaching the customer-supplied lens . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
General Camera Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Setting the Network Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Programming the camera using OSD . . . . . . . . . . . . . . 15
Menu Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Webpage Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Firmware upgrades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Troubleshooting and support . . . . . . . . . . . . . . . . . . . . . 52
Contacting technical support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
SymVeo IP Camera
User Manual
iv
1
Introduction
This is the GE SymVeo IP Camera User Manual for model SV-
XP1. This document includes detailed instructions explaining:
• how to setup and install the IP Camera and
• how to change the IP address
There is also information describing how to contact technical
support if you have questions. To use this document effectively,
you should meet the following minimum qualifications:
• a basic knowledge of CCTV systems and components; and
• a basic knowledge of electrical wiring and low-voltage
electrical connections; and
• a basic knowledge of networking and IP addressing.
Read these instructions and all ancillary documentation entirely
before installing or operating this product.
Note: A qualified service person, complying with all applicable codes,
should perform whatever hardware installation is required.
SymVeo IP Camera
User Manual
2
Conventions used in this manual
The following conventions are used in this document:
Safety terms and symbols
These terms may appear in this manual:
Cautions identify conditions or practices that may result in
damage to the equipment or other property.
Warnings identify conditions or practices that could result in
equipment damage or serious personal injury.
Bold Menu items and buttons.
Italic Emphasis of an instruction or point; special terms.
File names, path names, windows, panes, tabs,
fields, variables, and other GUI elements.
Titles of books and various documents.
Monospace Text that displays on the computer screen.
Programming or coding sequences.
Blue italic Hyperlinks to cross-references, related topics, and
URL addresses.
CAUTION Improper use may cause equipment damage.
WARNING Improper use could cause equipment damage or
serious personal injury.
3
Overview
The SV-XP1 is a fixed IP network color camera that combines
XPosureTM image technology with digital network capability. The
SV-XP1 is equipped with a 10/100Base-T (RJ45) interface and a
built-in web server. The SV-XP1 camera uses MPEG-4
compression for efficient distribution over a network. The camera
also incorporates hybrid technology - it features both digital and
analog output for local monitoring and recording.
Product contents
The SV-XP1 camera system consists of the camera, this manual,
SymNav software CD, and a DB9-F to RJ45 RS232 cable for
changing the IP address, as shown in Figure 1.
Figure 1. Product contents
Manual Camera SymNav RS232 cable
Software CD
SymVeo IP Camera
User Manual
4
Inspect the package and contents for visible damage. If any
components are damaged or missing, do not use the unit; contact
the supplier immediately. If you need to return the unit, you must
ship it in the original box.
Other required equipment
You might also need some or all of the following for proper
installation and use of this product:
• 12 VDC 1 Amp Power Supply.
• Lens.
• PC, to set the IP address and view video with the
SymNav user interface.
• CCTV for local monitoring.
Refer to your lens and CCTV monitor manuals for installation
and setup information.
References
If you want to investigate related topics, these other documents
may prove helpful:
•GESecurity.SymDec User Manual (0150-0285)
•GESecurity.SymDec-4 User Manual (0150-0304)
• GE Security. SymNav User Manual (0150-0303)
Tabla de contenidos
Otros manuales de Cámara IP de GE
