GE Multilin MM300 Instrucciones de funcionamiento
Page 1 of 15
GE Grid Solutions
Grid Automation
Avda. Pinoa, 10
48170 Zamudio
SPAIN
T +34 94 485 88 00
F +34 94 485 88 45
MM300 Installation
Recommendations
Title Name Signature Date
Prepared By Eider Brazal
11 Oct 2019
Revised By Jokin Galletero
14 Oct 2019
Page 2 of 15
GE Grid Solutions
Grid Automation
Avda. Pinoa, 10
48170 Zamudio
SPAIN
T +34 94 485 88 00
F +34 94 485 88 45
Contents:
1. INTRODUCTION ....................................................................................................................................................3
2. MM300 PERFORMANCE .......................................................................................................................................3
2.1. HARDWARE ........................................................................................................................................................... 3
2.2. RELIABILITY ............................................................................................................................................................ 4
2.3. WARRANTY ........................................................................................................................................................... 5
3. MECHANICAL RECOMMENDATIONS .....................................................................................................................6
4. THERMAL RECOMMENDATIONS ......................................................................................................................... 13
5. ELECTRICAL RECOMMENDATIONS ...................................................................................................................... 18
Page 3 of 15
GE Grid Solutions
Grid Automation
Avda. Pinoa, 10
48170 Zamudio
SPAIN
T +34 94 485 88 00
F +34 94 485 88 45
1. INTRODUCTION
The MM300 is a modular motor protection and control system designed specifically for low-voltage motor
applications. It was launched to the market in 2007.
The aim of this report is to provide recommendations for the installation of the MM300 relay that may be
considered to optimize motor protection reliability.
At the date of this report there are more than 37000 units supplied worldwide and installed in many
different applications and countries.
2. MM300 PERFORMANCE
2.1. Hardware
The MM300 is packaged in a modular arrangement.
Fig. 1 Relay base and expansion modules.
The base module consists of:
- Slot A: power supply.
- Slot B: CPU and communication module.
- Slot C: IO_C Vac Inputs/Outputs module or IO_E Vdc Inputs/Outputs module.
- Slot D: IO_A CT module.
Page 4 of 15
GE Grid Solutions
Grid Automation
Avda. Pinoa, 10
48170 Zamudio
SPAIN
T +34 94 485 88 00
F +34 94 485 88 45
The expansion module is configurable and different modules can be ordered for slots E, F, G and H:
Fig. 2 Expansion modules options.
2.2. Reliability
The MTBF (Mean Time Between Failures) is 505 years as of April 3, 2019 latest recorded figures.
This is equivalent to a failure rate of:
FR = 1 / MTBF = 1 / 505= 0.20 %/year
This performance has been constant since that date due product maturity and our continuous
improvement program.
Page 5 of 15
GE Grid Solutions
Grid Automation
Avda. Pinoa, 10
48170 Zamudio
SPAIN
T +34 94 485 88 00
F +34 94 485 88 45
2.3. Warranty
Fig.3 Ten years warranty logo in the web.
GE guaranties all MM300 supplied since October 1st, 2013 for 10 years as the rest of protection and control
products that are in active life cycle status.
This warranty includes materials and workmanship when the product is wired, set and connected as per
the instruction manual and within the published specifications.
This extended warranty has been possible as a result of many product and process improvements in the last
10 years using modern techniques of product design, manufacturing, components selection and field returns
continuous improvement.
To achieve the best performance, cybersecurity, etc. GE publishes periodically new firmware versions with
the corresponding release notes that customers may download and upgrade at no charge in the field if they
feel the new version provides significant advantages.
Page 6 of 15
GE Grid Solutions
Grid Automation
Avda. Pinoa, 10
48170 Zamudio
SPAIN
T +34 94 485 88 00
F +34 94 485 88 45
3. MECHANICAL RECOMMENDATIONS
In order to ensure good connection of the boards, please follow recommendations below:
1- Cable harnesses must not be too tight.
Fig. 4 Example of a proper wiring.
This allows good connection between the boards and the internal bus board of the relay.
Page 7 of 15
GE Grid Solutions
Grid Automation
Avda. Pinoa, 10
48170 Zamudio
SPAIN
T +34 94 485 88 00
F +34 94 485 88 45
It also avoids damaged connectors as per the pictures below:
Fig. 5 Example of broken connector.
And avoids sagged pins in the boards:
Fig. 6 Example of sagged pin.
Page 8 of 15
GE Grid Solutions
Grid Automation
Avda. Pinoa, 10
48170 Zamudio
SPAIN
T +34 94 485 88 00
F +34 94 485 88 45
Cards screw properly inserted.
Fig. 7 Screws properly inserted.
Page 9 of 15
GE Grid Solutions
Grid Automation
Avda. Pinoa, 10
48170 Zamudio
SPAIN
T +34 94 485 88 00
F +34 94 485 88 45
2- Do not use big, flat head nor electric screwdrivers. Use only small manual Philips screwdriver.
Fig. 8 Use only small manual Philips screwdriver.
This is an example of a relay case damaged due to excessive screw tightening.
Page 10 of 15
GE Grid Solutions
Grid Automation
Avda. Pinoa, 10
48170 Zamudio
SPAIN
T +34 94 485 88 00
F +34 94 485 88 45
Fig. 9 Relay case damaged due to excessive screw tightening.
Maximum tightening torque is 10lb.in.C as per the instruction manual. As the screw is made of steel
and the relay case is plastic, it has low tightening torque. Therefore, manual small Philips
screwdriver is recommended.
Fig. 10 Maximum tightening torque specified in the instruction manual.
3- The MM300 motor Protection series has been designed to be installed in compact drawers in harsh
industrial environments.
Otros manuales para Multilin MM300
3
Tabla de contenidos
Otros manuales de Sistema de control de GE
GE
GE Multilin GEK-113328A Manual de usuario
GE
GE TRANSFORMER MANAGEMENT RELAY 745 Manual de usuario
GE
GE PACSystems RX7i Manual de usuario
GE
GE C30 Manual de usuario
GE
GE WH12X10457 Guía de configuración
GE
GE PACSystems RX3i CPE400 Manual de usuario
GE
GE Multilin G650 Manual de usuario
GE
GE Multilin MM300 Manual de usuario
GE
GE Mark VIe Manual de lista de piezas
GE
GE SPEEDTRONIC Mark V Manual de usuario
